1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
2 * Copyright (c) 2017-2018, Sven Eckelmann <sven.eckelmann@openmesh.com>
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
18 #include "qcom-ipq4019.dtsi"
19 #include <dt-bindings/gpio/gpio.h>
20 #include <dt-bindings/input/input.h>
21 #include <dt-bindings/soc/qcom,tcsr.h>
24 model = "OpenMesh A62";
25 compatible = "openmesh,a62", "qcom,ipq4019";
38 compatible = "qcom,tcsr";
39 reg = <0x194b000 0x100>;
40 qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
45 compatible = "qcom,tcsr";
46 reg = <0x1949000 0x100>;
47 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
51 compatible = "qcom,tcsr";
52 reg = <0x1953000 0x1000>;
53 qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
57 compatible = "qcom,tcsr";
58 reg = <0x1957000 0x100>;
59 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
67 pinctrl-0 = <&serial_pins>;
68 pinctrl-names = "default";
81 switch_lan_bmp = <0x10>;
82 switch_wan_bmp = <0x20>;
93 compatible = "gpio-keys";
97 gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
98 linux,code = <KEY_RESTART >;
104 led-failsafe = &power;
105 led-running = &power;
106 led-upgrade = &power;
110 compatible = "gpio-leds";
113 label = "a62:red:status";
114 gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>;
115 linux,default-trigger = "default-off";
119 label = "a62:green:status";
120 gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
124 label = "a62:blue:status";
125 gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
126 linux,default-trigger = "default-off";
131 compatible = "linux,wdt-gpio";
132 gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
134 /* hw_margin_ms is actually 300s but driver limits it to 60s */
135 hw_margin_ms = <60000>;
141 serial_pins: serial_pinmux {
143 pins = "gpio16", "gpio17";
144 function = "blsp_uart0";
149 spi_0_pins: spi_0_pinmux {
151 function = "blsp_spi0";
152 pins = "gpio13", "gpio14", "gpio15";
153 drive-strength = <12>;
159 drive-strength = <2>;
167 gpios = <58 GPIO_ACTIVE_HIGH>;
169 line-name = "enable USB2 power";
178 pinctrl-0 = <&spi_0_pins>;
179 pinctrl-names = "default";
181 cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
184 #address-cells = <1>;
186 compatible = "jedec,spi-nor";
188 spi-max-frequency = <24000000>;
189 /* partitions are passed via bootloader */
198 qcom,phy_mdio_addr = <3>;
199 qcom,poll_required = <1>;
200 qcom,forced_speed = <1000>;
201 qcom,forced_duplex = <1>;
211 perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
212 wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
215 reg = <0x00000000 0 0 0 0>;
216 #address-cells = <3>;
221 compatible = "qcom,ath10k";
223 reg = <0x00010000 0 0 0 0>;
224 qcom,ath10k-calibration-variant = "OM-A62";
231 qcom,ath10k-calibration-variant = "OM-A62";
236 qcom,ath10k-calibration-variant = "OM-A62";