1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
2 * Copyright (c) 2017, Christian Mehlis <christian@m3hlis.de>
3 * Copyright (c) 2017-2018, Sven Eckelmann <sven.eckelmann@openmesh.com>
5 * Permission to use, copy, modify, and/or distribute this software for any
6 * purpose with or without fee is hereby granted, provided that the above
7 * copyright notice and this permission notice appear in all copies.
9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
19 #include "qcom-ipq4019.dtsi"
20 #include <dt-bindings/gpio/gpio.h>
21 #include <dt-bindings/input/input.h>
22 #include <dt-bindings/soc/qcom,tcsr.h>
25 model = "Compex WPJ428";
26 compatible = "compex,wpj428", "qcom,ipq4019";
39 compatible = "qcom,tcsr";
40 reg = <0x194b000 0x100>;
41 qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
46 compatible = "qcom,tcsr";
47 reg = <0x1949000 0x100>;
48 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
52 compatible = "qcom,tcsr";
53 reg = <0x1953000 0x1000>;
54 qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
58 compatible = "qcom,tcsr";
59 reg = <0x1957000 0x100>;
60 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
68 pinctrl-0 = <&serial_pins>;
69 pinctrl-names = "default";
86 switch_lan_bmp = <0x10>;
87 switch_wan_bmp = <0x20>;
98 compatible = "gpio-keys";
102 gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
103 linux,code = <KEY_RESTART>;
109 led-failsafe = &status;
110 led-upgrade = &status;
114 compatible = "gpio-leds";
117 label = "wpj428:green:rss4";
118 gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
119 default-state = "off";
123 label = "wpj428:green:rss3";
124 gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
125 default-state = "off";
130 compatible = "gpio-beeper";
131 gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
136 serial_pins: serial_pinmux {
138 pins = "gpio60", "gpio61";
139 function = "blsp_uart0";
144 spi_0_pins: spi_0_pinmux {
146 function = "blsp_spi0";
147 pins = "gpio55", "gpio56", "gpio57";
148 drive-strength = <12>;
154 drive-strength = <2>;
166 pinctrl-0 = <&spi_0_pins>;
167 pinctrl-names = "default";
169 cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
172 #address-cells = <1>;
174 compatible = "jedec,spi-nor";
176 spi-max-frequency = <24000000>;
179 compatible = "fixed-partitions";
180 #address-cells = <1>;
185 reg = <0x00000000 0x00040000>;
190 reg = <0x00040000 0x00020000>;
195 reg = <0x00060000 0x00060000>;
200 reg = <0x000c0000 0x00010000>;
204 label = "0:DDRPARAMS";
205 reg = <0x000d0000 0x00010000>;
209 label = "0:APPSBLENV"; /* uboot env*/
210 reg = <0x000e0000 0x00010000>;
214 label = "0:APPSBL"; /* uboot */
215 reg = <0x000f0000 0x00080000>;
220 reg = <0x00170000 0x00010000>;
225 reg = <0x00180000 0x01e80000>;
236 qcom,phy_mdio_addr = <4>;
237 qcom,poll_required = <1>;
238 qcom,forced_speed = <1000>;
239 qcom,forced_duplex = <1>;
244 qcom,phy_mdio_addr = <3>;
245 qcom,poll_required = <1>;
246 qcom,forced_speed = <1000>;
247 qcom,forced_duplex = <1>;