1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
2 * Copyright (c) 2017, Christian Mehlis <christian@m3hlis.de>
3 * Copyright (c) 2017-2018, Sven Eckelmann <sven.eckelmann@openmesh.com>
5 * Permission to use, copy, modify, and/or distribute this software for any
6 * purpose with or without fee is hereby granted, provided that the above
7 * copyright notice and this permission notice appear in all copies.
9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
19 #include "qcom-ipq4019.dtsi"
20 #include "qcom-ipq4019-bus.dtsi"
21 #include <dt-bindings/gpio/gpio.h>
22 #include <dt-bindings/input/input.h>
23 #include <dt-bindings/soc/qcom,tcsr.h>
26 model = "Compex WPJ428";
27 compatible = "compex,wpj428", "qcom,ipq4019";
40 compatible = "qcom,tcsr";
41 reg = <0x194b000 0x100>;
42 qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
47 compatible = "qcom,tcsr";
48 reg = <0x1949000 0x100>;
49 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
53 compatible = "qcom,tcsr";
54 reg = <0x1953000 0x1000>;
55 qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
59 compatible = "qcom,tcsr";
60 reg = <0x1957000 0x100>;
61 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
69 pinctrl-0 = <&serial_pins>;
70 pinctrl-names = "default";
87 switch_lan_bmp = <0x10>;
88 switch_wan_bmp = <0x20>;
99 compatible = "gpio-keys";
103 gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
104 linux,code = <KEY_RESTART>;
110 led-failsafe = &status;
111 led-upgrade = &status;
115 compatible = "gpio-leds";
118 label = "wpj428:green:rss4";
119 gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
120 default-state = "off";
124 label = "wpj428:green:rss3";
125 gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
126 default-state = "off";
131 compatible = "gpio-beeper";
132 gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
137 serial_pins: serial_pinmux {
139 pins = "gpio60", "gpio61";
140 function = "blsp_uart0";
145 spi_0_pins: spi_0_pinmux {
147 function = "blsp_spi0";
148 pins = "gpio55", "gpio56", "gpio57";
149 drive-strength = <12>;
155 drive-strength = <2>;
167 pinctrl-0 = <&spi_0_pins>;
168 pinctrl-names = "default";
170 cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
173 #address-cells = <1>;
175 compatible = "jedec,spi-nor";
177 spi-max-frequency = <24000000>;
180 compatible = "fixed-partitions";
181 #address-cells = <1>;
186 reg = <0x00000000 0x00040000>;
191 reg = <0x00040000 0x00020000>;
196 reg = <0x00060000 0x00060000>;
201 reg = <0x000c0000 0x00010000>;
205 label = "0:DDRPARAMS";
206 reg = <0x000d0000 0x00010000>;
210 label = "0:APPSBLENV"; /* uboot env*/
211 reg = <0x000e0000 0x00010000>;
215 label = "0:APPSBL"; /* uboot */
216 reg = <0x000f0000 0x00080000>;
221 reg = <0x00170000 0x00010000>;
226 reg = <0x00180000 0x01e80000>;
237 qcom,phy_mdio_addr = <4>;
238 qcom,poll_required = <1>;
239 qcom,forced_speed = <1000>;
240 qcom,forced_duplex = <1>;
245 qcom,phy_mdio_addr = <3>;
246 qcom,poll_required = <1>;
247 qcom,forced_speed = <1000>;
248 qcom,forced_duplex = <1>;