1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qcom-ipq4019.dtsi"
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/input/linux-event-codes.h>
7 #include <dt-bindings/soc/qcom,tcsr.h>
10 model = "ZyXEL NBG6617";
11 compatible = "zyxel,nbg6617", "qcom,ipq4019";
15 * the vendor u-boot adds root and mtdparts cmdline parameters
16 * which we don't want... but we have to overwrite them or else
17 * the kernel will take them at face value.
19 bootargs-append = " mtdparts= root=31:13";
24 led-failsafe = &power;
39 compatible = "qcom,tcsr";
40 reg = <0x1949000 0x100>;
41 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
45 compatible = "qcom,tcsr";
46 reg = <0x194b000 0x100>;
47 qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
51 compatible = "qcom,tcsr";
52 reg = <0x1953000 0x1000>;
53 qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
57 compatible = "qcom,tcsr";
58 reg = <0x1957000 0x100>;
59 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
88 compatible = "gpio-keys";
92 gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
93 linux,code = <KEY_RFKILL>;
94 linux,input-type = <EV_SW>;
99 gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
100 linux,code = <KEY_WPS_BUTTON>;
105 gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
106 linux,code = <KEY_RESTART>;
111 compatible = "gpio-leds";
112 pinctrl-0 = <&led_pins>;
113 pinctrl-names = "default";
116 label = "nbg6617:green:power";
117 gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
121 label = "nbg6617:green:usb";
122 gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
126 label = "nbg6617:green:wlan2G";
127 gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
131 label = "nbg6617:green:wlan5G";
132 gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
136 label = "nbg6617:green:wps";
137 gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
143 serial_pins: serial_pinmux {
145 pins = "gpio60", "gpio61";
146 function = "blsp_uart0";
150 spi_0_pins: spi_0_pinmux {
152 function = "blsp_spi0";
153 pins = "gpio55", "gpio56", "gpio57";
154 drive-strength = <12>;
161 drive-strength = <2>;
166 led_pins: led_pinmux {
168 pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58";
169 drive-strength = <0x8>;
176 &blsp1_spi1 { /* BLSP1 QUP1 */
177 pinctrl-0 = <&spi_0_pins>;
178 pinctrl-names = "default";
180 cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
183 compatible = "mx25l25635f", "jedec,spi-nor";
184 #address-cells = <1>;
187 spi-max-frequency = <24000000>;
192 compatible = "fixed-partitions";
193 #address-cells = <1>;
198 reg = <0x00000000 0x00040000>;
203 reg = <0x00040000 0x00020000>;
208 reg = <0x00060000 0x00060000>;
213 reg = <0x000c0000 0x00010000>;
218 reg = <0x000d0000 0x00010000>;
222 label = "APPSBL"; /* u-boot */
223 reg = <0x000e0000 0x00080000>;
224 /* U-Boot Standalone App "zloader" is located at 0x64000 */
228 label = "APPSBLENV"; /* u-boot env */
229 reg = <0x00160000 0x00010000>;
232 /* make a backup of this partition! */
234 reg = <0x00170000 0x00010000>;
239 reg = <0x00180000 0x00400000>;
243 reg = <0x00580000 0x00010000>;
248 reg = <0x00590000 0x00010000>;
252 reg = <0x005a0000 0x00100000>;
256 label = "not_root_data";
258 * for some strange reason, someone at ZyXEL
259 * had the "great" idea to put the rootfs_data
260 * in front of rootfs... Don't do that!
261 * As a result this one, full MebiByte remains
264 reg = <0x006a0000 0x00100000>;
268 reg = <0x007a0000 0x01860000>;
275 pinctrl-0 = <&serial_pins>;
276 pinctrl-names = "default";
290 qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
295 qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";