1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include "qcom-ipq4019.dtsi"
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/soc/qcom,tcsr.h>
9 model = "Luma Home WRTQ-329ACN";
10 compatible = "luma,wrtq-329acn";
13 compatible = "i2c-gpio";
14 sda-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
15 scl-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
19 /* No driver exists */
21 compatible = "ti,msp430";
26 compatible = "atmel,24c16";
34 compatible = "gpio-keys";
38 gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
39 linux,code = <KEY_RESTART>;
49 compatible = "qcom,tcsr";
50 reg = <0x1949000 0x100>;
51 qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
55 compatible = "qcom,tcsr";
56 reg = <0x194b000 0x100>;
57 qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
61 compatible = "qcom,tcsr";
62 reg = <0x1953000 0x1000>;
63 qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
67 compatible = "qcom,tcsr";
68 reg = <0x1957000 0x100>;
69 qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
90 cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
91 <&tlmm 59 GPIO_ACTIVE_HIGH>;
92 pinctrl-0 = <&spi0_pins>;
93 pinctrl-names = "default";
96 compatible = "jedec,spi-nor";
98 spi-max-frequency = <24000000>;
101 compatible = "fixed-partitions";
102 #address-cells = <1>;
107 reg = <0x000000 0x040000>;
113 reg = <0x040000 0x020000>;
119 reg = <0x060000 0x060000>;
125 reg = <0x0c0000 0x010000>;
130 label = "0:DDRPARAMS";
131 reg = <0x0d0000 0x010000>;
136 label = "0:APPSBLENV";
137 reg = <0x0e0000 0x010000>;
142 reg = <0x0f0000 0x080000>;
148 reg = <0x170000 0x010000>;
152 compatible = "fixed-layout";
153 #address-cells = <1>;
156 macaddr_art_0: macaddr@0{
157 reg = <0x0000 0x0006>;
160 macaddr_art_6: macaddr@6{
161 reg = <0x0006 0x0006>;
164 precal_art_1000: precal@1000 {
165 reg = <0x1000 0x2f20>;
168 precal_art_5000: precal@5000 {
169 reg = <0x5000 0x2f20>;
179 compatible = "spi-nand";
181 spi-max-frequency = <24000000>;
184 compatible = "fixed-partitions";
185 #address-cells = <1>;
190 reg = <0x0000000 0x8000000>;
199 pinctrl-0 = <&serial0_pins>;
200 pinctrl-names = "default";
235 nvmem-cell-names = "mac-address";
236 nvmem-cells = <&macaddr_art_6>;
242 nvmem-cell-names = "mac-address";
243 nvmem-cells = <&macaddr_art_0>;
247 serial0_pins: serial0_pinmux {
249 function = "blsp_uart0";
250 pins = "gpio60", "gpio61";
255 spi0_pins: spi0_pinmux {
257 function = "blsp_spi0";
258 pins = "gpio55", "gpio56", "gpio57";
260 drive-strength = <12>;
265 pins = "gpio54", "gpio59";
267 drive-strength = <2>;
295 nvmem-cell-names = "pre-calibration";
296 nvmem-cells = <&precal_art_1000>;
297 qcom,ath10k-calibration-variant = "Luma-WRTQ-329ACN";
302 nvmem-cell-names = "pre-calibration";
303 nvmem-cells = <&precal_art_5000>;
304 qcom,ath10k-calibration-variant = "Luma-WRTQ-329ACN";