1 include $(TOPDIR
)/rules.mk
2 include $(INCLUDE_DIR
)/image.mk
4 DEVICE_VARS
+= RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
8 KERNEL_DEPENDS
= $$(wildcard $(DTS_DIR
)/$$(DEVICE_DTS
).dts
)
9 KERNEL_INITRAMFS_PREFIX
:= $$(IMG_PREFIX
)-$(1)-initramfs
10 KERNEL_PREFIX
:= $$(IMAGE_PREFIX
)
11 KERNEL_LOADADDR
:= 0x80208000
12 SUPPORTED_DEVICES
:= $(subst _
,$(comma
),$(1))
13 IMAGE
/sysupgrade.bin
= sysupgrade-tar | append-metadata
14 IMAGE
/sysupgrade.bin
/squashfs
:=
17 define Device
/FitImage
18 KERNEL_SUFFIX
:= -fit-uImage.itb
19 KERNEL
= kernel-bin | gzip | fit gzip
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb
23 define Device
/FitImageLzma
24 KERNEL_SUFFIX
:= -fit-uImage.itb
25 KERNEL
= kernel-bin | lzma | fit lzma
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb
29 define Device
/FitzImage
30 KERNEL_SUFFIX
:= -fit-zImage.itb
31 KERNEL
= kernel-bin | fit none
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb
37 IMAGES
:= nand-factory.ubi nand-sysupgrade.bin
38 IMAGE
/nand-factory.ubi
:= append-ubi
39 IMAGE
/nand-sysupgrade.bin
:= sysupgrade-tar | append-metadata
42 define Device
/DniImage
43 KERNEL_SUFFIX
:= -fit-uImage.itb
44 KERNEL
= kernel-bin | gzip | fit gzip
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb
48 IMAGES
:= factory.img sysupgrade.bin
49 IMAGE
/factory.img
:= append-kernel | pad-offset
64k
64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
50 IMAGE
/sysupgrade.bin
:= append-kernel | pad-offset
64k
64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | append-metadata
52 DEVICE_VARS
+= NETGEAR_BOARD_ID NETGEAR_HW_ID
55 define Device
/8dev_jalapeno
56 $(call Device
/FitImage
)
58 DEVICE_DTS
:= qcom-ipq4018-jalapeno
61 DEVICE_TITLE
:= 8devices Jalapeno
63 TARGET_DEVICES
+= 8dev_jalapeno
65 define Device
/asus_map-ac2200
66 $(call Device
/FitImageLzma
)
67 DEVICE_DTS
:= qcom-ipq4019-map-ac2200
68 DEVICE_TITLE
:= ASUS Lyra MAP-AC2200
69 IMAGES
:= sysupgrade.bin
70 DEVICE_PACKAGES
:= ipq-wifi-asus_map-ac2200 ath10k-firmware-qca9888-ct kmod-ath3k
72 TARGET_DEVICES
+= asus_map-ac2200
74 define Device
/asus_rt-ac58u
75 $(call Device
/FitImageLzma
)
76 DEVICE_DTS
:= qcom-ipq4018-rt-ac58u
80 DEVICE_TITLE
:= Asus RT-AC58U
81 IMAGE_SIZE
:= 20439364
82 FILESYSTEMS
:= squashfs
83 # Someone - in their infinite wisdom - decided to put the firmware
84 # version in front of the image name \03\00\00\04 => Version 3.0.0.4
85 # Since u-boot works with strings we either need another fixup step
86 # to add a version... or we are very careful not to add '\0' into that
87 # string and call it a day.... Yeah, we do the latter!
88 UIMAGE_NAME
:=$(shell echo
-e
'\03\01\01\01RT-AC58U')
89 IMAGES
:= sysupgrade.bin
90 DEVICE_PACKAGES
:= kmod-usb-ledtrig-usbport
92 TARGET_DEVICES
+= asus_rt-ac58u
94 define Device
/avm_fritzbox-4040
95 $(call Device
/FitImageLzma
)
96 DEVICE_DTS
:= qcom-ipq4018-fritz4040
97 BOARD_NAME
:= fritz4040
98 DEVICE_TITLE
:= AVM Fritz
!Box
4040
99 IMAGE_SIZE
:= 29753344
100 UBOOT_PATH
:= $(STAGING_DIR_IMAGE
)/uboot-fritz4040.bin
101 UBOOT_PARTITION_SIZE
:= 524288
102 IMAGES
= eva.bin sysupgrade.bin
103 IMAGE
/eva.bin
:= append-uboot | pad-to
$$$$(UBOOT_PARTITION_SIZE
) | append-kernel | append-rootfs | pad-rootfs
104 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
105 DEVICE_PACKAGES
:= fritz-tffs fritz-caldata
107 TARGET_DEVICES
+= avm_fritzbox-4040
109 define Device
/compex_wpj428
110 $(call Device
/FitImage
)
111 DEVICE_DTS
:= qcom-ipq4028-wpj428
112 DEVICE_DTS_CONFIG
:= config@
4
114 DEVICE_TITLE
:= Compex WPJ428
117 IMAGES
= sysupgrade.bin
118 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
119 DEVICE_PACKAGES
:= kmod-gpio-beeper
121 TARGET_DEVICES
+= compex_wpj428
123 define Device
/engenius_eap1300
124 $(call Device
/FitImage
)
125 DEVICE_TITLE
:= EnGenius EAP1300
126 DEVICE_DTS_CONFIG
:= config@
4
127 BOARD_NAME
:= eap1300
128 DEVICE_DTS
:= qcom-ipq4018-eap1300
131 IMAGES
:= sysupgrade.bin
132 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
133 DEVICE_PACKAGES
:= ipq-wifi-engenius_eap1300
135 TARGET_DEVICES
+= engenius_eap1300
137 define Device
/glinet_gl-b1300
138 $(call Device
/FitImage
)
139 DEVICE_TITLE
:= GL.iNet GL-B1300
140 BOARD_NAME
:= gl-b1300
141 DEVICE_DTS
:= qcom-ipq4029-gl-b1300
144 IMAGES
:= sysupgrade.bin
145 IMAGE
/sysupgrade.bin
:= append-kernel |append-rootfs | pad-rootfs | append-metadata
147 TARGET_DEVICES
+= glinet_gl-b1300
149 define Device
/linksys_ea6350v3
150 # The Linksys EA6350v3 has a uboot bootloader that does not
151 # support either booting lzma kernel images nor booting UBI
152 # partitions. This uboot, however, supports raw kernel images and
155 # As for the time of writing this, the device will boot the kernel
156 # from a fixed address with a fixed length of 3MiB. Also, the
157 # device has a hard-coded kernel command line that requieres the
158 # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
159 # Oh... and the kernel partition overlaps with the rootfs
160 # partition (the same for alt_kernel and alt_rootfs).
162 # If you are planing re-partitioning the device, you may want to
163 # keep those details in mind:
164 # 1. The kernel adresses you should honor are 0x00000000 and
165 # 0x02800000 respectively.
166 # 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
167 # 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
168 # 4. The kernel command line from uboot is harcoded to boot with
169 # rootfs either in mtd11 or mtd13.
170 $(call Device
/FitzImage
)
171 DEVICE_TITLE
:= Linksys EA6350v3
172 DEVICE_DTS
:= qcom-ipq4018-ea6350v3
175 KERNEL_SIZE
:= 3145728
176 IMAGE_SIZE
:= 38797312
178 IMAGES
:= factory.bin sysupgrade.bin
179 IMAGE
/factory.bin
:= append-kernel | append-uImage-fakehdr filesystem | pad-to
$$$${KERNEL_SIZE} | append-ubi | linksys-image type
=EA6350v3
180 DEVICE_PACKAGES
:= ipq-wifi-linksys_ea6350v3 uboot-envtools
182 TARGET_DEVICES
+= linksys_ea6350v3
184 define Device
/meraki_mr33
185 $(call Device
/FitImage
)
186 DEVICE_DTS
:= qcom-ipq4029-mr33
189 DEVICE_TITLE
:= Cisco Meraki MR33
190 IMAGES
= sysupgrade.bin
191 DEVICE_PACKAGES
:= -swconfig ath10k-firmware-qca9887-ct
193 TARGET_DEVICES
+= meraki_mr33
195 define Device
/netgear_ex61x0v2
196 $(call Device
/DniImage
)
197 DEVICE_DTS_CONFIG
:= config@
4
198 NETGEAR_BOARD_ID
:= EX6150v2series
199 NETGEAR_HW_ID
:= 29765285+16+0+128+2x2
202 define Device
/netgear_ex6100v2
203 $(call Device
/netgear_ex61x0v2
)
204 DEVICE_DTS
:= qcom-ipq4018-ex6100v2
205 DEVICE_TITLE
:= Netgear EX6100v2
207 TARGET_DEVICES
+= netgear_ex6100v2
209 define Device
/netgear_ex6150v2
210 $(call Device
/netgear_ex61x0v2
)
211 DEVICE_DTS
:= qcom-ipq4018-ex6150v2
212 DEVICE_TITLE
:= Netgear EX6150v2
214 TARGET_DEVICES
+= netgear_ex6150v2
216 define Device
/openmesh_a42
217 $(call Device
/FitImageLzma
)
218 DEVICE_DTS
:= qcom-ipq4018-a42
219 DEVICE_DTS_CONFIG
:= config@om.a42
221 DEVICE_TITLE
:= OpenMesh A42
222 KERNEL
= kernel-bin | lzma | fit lzma
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb | pad-to
$$(BLOCKSIZE
)
224 IMAGES
= factory.bin sysupgrade.bin
225 IMAGE
/factory.bin
:= append-rootfs | pad-rootfs | openmesh-image ce_type
=A42
226 IMAGE
/sysupgrade.bin
/squashfs
:= append-rootfs | pad-rootfs | sysupgrade-tar rootfs
=$$$$@ | append-metadata
227 DEVICE_PACKAGES
:= uboot-envtools
229 TARGET_DEVICES
+= openmesh_a42
231 define Device
/openmesh_a62
232 $(call Device
/FitImageLzma
)
233 DEVICE_DTS
:= qcom-ipq4019-a62
234 DEVICE_DTS_CONFIG
:= config@om.a62
236 DEVICE_TITLE
:= OpenMesh A62
237 KERNEL
= kernel-bin | lzma | fit lzma
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb | pad-to
$$(BLOCKSIZE
)
239 IMAGES
= factory.bin sysupgrade.bin
240 IMAGE
/factory.bin
:= append-rootfs | pad-rootfs | openmesh-image ce_type
=A62
241 IMAGE
/sysupgrade.bin
/squashfs
:= append-rootfs | pad-rootfs | sysupgrade-tar rootfs
=$$$$@ | append-metadata
242 DEVICE_PACKAGES
:= ath10k-firmware-qca9888-ct uboot-envtools
245 TARGET_DEVICES
+= openmesh_a62
247 define Device
/qcom_ap-dk01.1
-c1
248 DEVICE_TITLE
:= QCA AP-DK01.1
-C1
249 BOARD_NAME
:= ap-dk01.1
-c1
250 DEVICE_DTS
:= qcom-ipq4019-ap.dk01.1
-c1
254 $(call Device
/FitImage
)
255 IMAGES
:= sysupgrade.bin
256 IMAGE
/sysupgrade.bin
:= append-kernel | pad-to
$$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
258 TARGET_DEVICES
+= qcom_ap-dk01.1
-c1
260 define Device
/qcom_ap-dk04.1
-c1
261 $(call Device
/FitImage
)
262 $(call Device
/UbiFit
)
263 DEVICE_DTS
:= qcom-ipq4019-ap.dk04.1
-c1
268 BOARD_NAME
:= ap-dk04.1
-c1
269 DEVICE_TITLE
:= QCA AP-DK04.1
-C1
271 TARGET_DEVICES
+= qcom_ap-dk04.1
-c1
273 define Device
/zyxel_nbg6617
274 $(call Device
/FitImageLzma
)
275 DEVICE_DTS
:= qcom-ipq4018-nbg6617
276 DEVICE_TITLE
:= ZyXEL NBG6617
277 ROOTFS_SIZE
:= 24960k
279 RAS_ROOTFS_SIZE
:= 19840k
280 RAS_VERSION
:= "$(VERSION_DIST) $(REVISION)"
281 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
282 IMAGES
:= sysupgrade.bin factory.bin
283 # The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
284 # at least as large as the one of the initial firmware image (not the current
285 # one on the device). This only applies to the Web-UI, the bootlaoder ignores
286 # this minimum-size. However, the larger image can be flashed both ways.
287 IMAGE
/factory.bin
:= append-rootfs | pad-rootfs | pad-to
64k | check-size
$$$$(ROOTFS_SIZE
) | zyxel-ras-image separate-kernel
288 IMAGE
/sysupgrade.bin
/squashfs
:= append-rootfs | pad-rootfs | check-size
$$$$(ROOTFS_SIZE
) | sysupgrade-tar rootfs
=$$$$@ | append-metadata
289 DEVICE_PACKAGES
:= uboot-envtools kmod-usb-ledtrig-usbport
291 TARGET_DEVICES
+= zyxel_nbg6617
293 define Device
/zyxel_wre6606
294 $(call Device
/FitImage
)
295 DEVICE_TITLE
:= ZyXEL WRE6606
296 DEVICE_DTS_CONFIG
:= config@
4
297 DEVICE_DTS
:= qcom-ipq4018-wre6606
298 IMAGES
:= sysupgrade.bin
299 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
301 TARGET_DEVICES
+= zyxel_wre6606
303 $(eval
$(call BuildImage
))