1 include $(TOPDIR
)/rules.mk
2 include $(INCLUDE_DIR
)/image.mk
4 DEVICE_VARS
+= NETGEAR_BOARD_ID NETGEAR_HW_ID
5 DEVICE_VARS
+= RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
6 DEVICE_VARS
+= WRGG_DEVNAME WRGG_SIGNATURE
10 KERNEL_DEPENDS
= $$(wildcard $(DTS_DIR
)/$$(DEVICE_DTS
).dts
)
11 KERNEL_INITRAMFS_PREFIX
:= $$(IMG_PREFIX
)-$(1)-initramfs
12 KERNEL_PREFIX
:= $$(IMAGE_PREFIX
)
13 KERNEL_LOADADDR
:= 0x80208000
14 DEVICE_DTS
= $$(SOC
)-$(lastword
$(subst _
, ,$(1)))
15 SUPPORTED_DEVICES
:= $(subst _
,$(comma
),$(1))
16 IMAGE
/sysupgrade.bin
= sysupgrade-tar | append-metadata
17 IMAGE
/sysupgrade.bin
/squashfs
:=
20 define Device
/FitImage
21 KERNEL_SUFFIX
:= -fit-uImage.itb
22 KERNEL
= kernel-bin | gzip | fit gzip
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb
26 define Device
/FitImageLzma
27 KERNEL_SUFFIX
:= -fit-uImage.itb
28 KERNEL
= kernel-bin | lzma | fit lzma
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb
32 define Device
/FitzImage
33 KERNEL_SUFFIX
:= -fit-zImage.itb
34 KERNEL
= kernel-bin | fit none
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb
40 IMAGES
:= nand-factory.ubi nand-sysupgrade.bin
41 IMAGE
/nand-factory.ubi
:= append-ubi
42 IMAGE
/nand-sysupgrade.bin
:= sysupgrade-tar | append-metadata
45 define Device
/DniImage
46 $(call Device
/FitzImage
)
49 IMAGES
:= factory.img sysupgrade.bin
50 IMAGE
/factory.img
:= append-kernel | pad-offset
64k
64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
51 IMAGE
/sysupgrade.bin
:= append-kernel | pad-offset
64k
64 | append-uImage-fakehdr filesystem | \
52 append-rootfs | pad-rootfs | append-metadata | check-size
55 define Build
/append-rootfshdr
56 mkimage
-A
$(LINUX_KARCH
) \
57 -O linux
-T filesystem \
58 -C lzma
-a
$(KERNEL_LOADADDR
) -e
$(if
$(KERNEL_ENTRY
),$(KERNEL_ENTRY
),$(KERNEL_LOADADDR
)) \
59 -n root.squashfs
-d
$(IMAGE_ROOTFS
) $@.new
60 dd if
=$@.new bs
=64 count
=1 >> $(IMAGE_KERNEL
)
63 define Build
/mkmylofw_32m
64 $(eval device_id
=$(word 1,$(1)))
65 $(eval revision
=$(word 2,$(1)))
68 size
="$$(stat -c%s $@)" \
69 pad
="$(subst k,* 1024,$(BLOCKSIZE))" \
70 pad
="(pad - (size % pad)) % pad" \
71 newsize
='size + pad'; \
72 $(STAGING_DIR_HOST
)/bin
/mkmylofw \
73 -B WPE72
-i
0x11f6:$(device_id
):0x11f6:$(device_id
) -r
$(revision
) \
74 -s
0x2000000 -p0x180000
:$$newsize:al
:0x80208000:"OpenWrt":$@ \
79 define Build
/qsdk-ipq-factory-nand-askey
80 $(TOPDIR
)/scripts
/mkits-qsdk-ipq-image.sh
$@.its\
81 askey_kernel
$(IMAGE_KERNEL
) \
82 askey_fs
$(IMAGE_ROOTFS
) \
84 PATH
=$(LINUX_DIR
)/scripts
/dtc
:$(PATH
) mkimage
-f
$@.its
$@.new
89 -$(STAGING_DIR_HOST
)/bin
/mksenaofw \
90 -n
$(BOARD_NAME
) -r
$(VENDOR_ID
) -p
$(1) \
91 -c
$(DATECODE
) -w
$(2) -x
$(CW_VER
) -t
0 \
97 define Build
/wrgg-image
100 -d
"$(WRGG_DEVNAME)" \
101 -s
"$(WRGG_SIGNATURE)" \
106 define Device
/8dev_habanero-dvk
107 $(call Device
/FitImageLzma
)
108 DEVICE_VENDOR
:= 8devices
109 DEVICE_MODEL
:= Habanero DVK
112 DEVICE_PACKAGES
:= ipq-wifi-8dev_habanero-dvk
113 IMAGES
:= sysupgrade.bin
114 IMAGE
/sysupgrade.bin
:= append-kernel | pad-to
64k | append-rootfs | pad-rootfs | append-metadata | check-size
116 TARGET_DEVICES
+= 8dev_habanero-dvk
118 define Device
/8dev_jalapeno-common
119 $(call Device
/FitImage
)
120 $(call Device
/UbiFit
)
126 define Device
/8dev_jalapeno
127 $(call Device
/8dev_jalapeno-common
)
128 DEVICE_VENDOR
:= 8devices
129 DEVICE_MODEL
:= Jalapeno
131 TARGET_DEVICES
+= 8dev_jalapeno
133 define Device
/alfa-network_ap120c-ac
134 $(call Device
/FitImage
)
135 $(call Device
/UbiFit
)
136 DEVICE_VENDOR
:= ALFA Network
137 DEVICE_MODEL
:= AP120C-AC
139 DEVICE_PACKAGES
:= kmod-usb-acm \
140 kmod-tpm-i2c-atmel uboot-envtools
144 IMAGES
:= nand-factory.bin nand-sysupgrade.bin
145 IMAGE
/nand-factory.bin
:= append-ubi | qsdk-ipq-factory-nand
147 TARGET_DEVICES
+= alfa-network_ap120c-ac
149 define Device
/aruba_glenmorangie
150 $(call Device
/FitImageLzma
)
151 DEVICE_VENDOR
:= Aruba
153 DEVICE_PACKAGES
:= ipq-wifi-aruba_ap-303
154 IMAGES
:= sysupgrade.bin
157 define Device
/aruba_ap-303
158 $(call Device
/aruba_glenmorangie
)
159 DEVICE_MODEL
:= AP-303
161 TARGET_DEVICES
+= aruba_ap-303
163 define Device
/aruba_ap-303h
164 $(call Device
/aruba_glenmorangie
)
165 DEVICE_MODEL
:= AP-303H
167 TARGET_DEVICES
+= aruba_ap-303h
169 define Device
/aruba_ap-365
170 $(call Device
/aruba_glenmorangie
)
171 DEVICE_MODEL
:= AP-365
172 DEVICE_PACKAGES
+= kmod-hwmon-ad7418
174 TARGET_DEVICES
+= aruba_ap-365
176 define Device
/asus_map-ac2200
177 $(call Device
/FitImageLzma
)
178 DEVICE_VENDOR
:= ASUS
179 DEVICE_MODEL
:= Lyra
(MAP-AC2200
)
181 IMAGES
:= sysupgrade.bin
182 DEVICE_PACKAGES
:= ath10k-firmware-qca9888-ct kmod-ath3k
184 TARGET_DEVICES
+= asus_map-ac2200
186 define Device
/asus_rt-ac58u
187 $(call Device
/FitImageLzma
)
188 DEVICE_VENDOR
:= ASUS
189 DEVICE_MODEL
:= RT-AC58U
194 IMAGE_SIZE
:= 20439364
195 FILESYSTEMS
:= squashfs
196 # Someone - in their infinite wisdom - decided to put the firmware
197 # version in front of the image name \03\00\00\04 => Version 3.0.0.4
198 # Since u-boot works with strings we either need another fixup step
199 # to add a version... or we are very careful not to add '\0' into that
200 # string and call it a day.... Yeah, we do the latter!
201 UIMAGE_NAME
:=$(shell echo
-e
'\03\01\01\01RT-AC58U')
202 IMAGES
:= sysupgrade.bin
203 DEVICE_PACKAGES
:= -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
204 kmod-usb-ledtrig-usbport
206 TARGET_DEVICES
+= asus_rt-ac58u
208 define Device
/avm_fritzbox-4040
209 $(call Device
/FitImageLzma
)
211 DEVICE_MODEL
:= FRITZ
!Box
4040
213 BOARD_NAME
:= fritz4040
215 UBOOT_PATH
:= $(STAGING_DIR_IMAGE
)/uboot-fritz4040.bin
216 UBOOT_PARTITION_SIZE
:= 524288
217 IMAGES
= eva.bin sysupgrade.bin
218 IMAGE
/eva.bin
:= append-uboot | pad-to
$$$$(UBOOT_PARTITION_SIZE
) | append-kernel | append-rootfs | pad-rootfs
219 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
220 DEVICE_PACKAGES
:= fritz-tffs fritz-caldata
222 TARGET_DEVICES
+= avm_fritzbox-4040
224 define Device
/avm_fritzbox-7530
225 $(call Device
/FitImageLzma
)
227 DEVICE_MODEL
:= FRITZ
!Box
7530
229 DEVICE_PACKAGES
:= fritz-caldata fritz-tffs-nand
230 IMAGES
:= sysupgrade.bin
232 TARGET_DEVICES
+= avm_fritzbox-7530
234 define Device
/avm_fritzrepeater-1200
235 $(call Device
/FitImageLzma
)
237 DEVICE_MODEL
:= FRITZ
!Repeater
1200
239 DEVICE_PACKAGES
:= fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200
240 IMAGES
:= sysupgrade.bin
242 TARGET_DEVICES
+= avm_fritzrepeater-1200
244 define Device
/avm_fritzrepeater-3000
245 $(call Device
/FitImageLzma
)
247 DEVICE_MODEL
:= FRITZ
!Repeater
3000
249 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
250 IMAGES
:= sysupgrade.bin
252 TARGET_DEVICES
+= avm_fritzrepeater-3000
254 define Device
/cellc_rtl30vw
255 KERNEL_SUFFIX
:= -fit-uImage.itb
256 KERNEL_INITRAMFS
= kernel-bin | gzip | fit gzip
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb
257 KERNEL
= kernel-bin | gzip | fit gzip
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb | uImage lzma | pad-to
2048
260 IMAGES
:= nand-factory.bin nand-sysupgrade.bin
261 IMAGE
/nand-factory.bin
:= append-rootfshdr | append-ubi | qsdk-ipq-factory-nand-askey
262 IMAGE
/nand-sysupgrade.bin
:= append-rootfshdr | sysupgrade-tar | append-metadata
263 DEVICE_VENDOR
:= Cell C
264 DEVICE_MODEL
:= RTL30VW
266 DEVICE_DTS_CONFIG
:= config@
5
272 DEVICE_PACKAGES
:= kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi ipq-wifi-cellc_rtl30vw
274 TARGET_DEVICES
+= cellc_rtl30vw
276 define Device
/cilab_meshpoint-one
277 $(call Device
/8dev_jalapeno-common
)
278 DEVICE_VENDOR
:= Crisis Innovation Lab
279 DEVICE_MODEL
:= MeshPoint.One
280 DEVICE_PACKAGES
:= kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
282 TARGET_DEVICES
+= cilab_meshpoint-one
284 define Device
/compex_wpj419
285 $(call Device
/FitImage
)
286 $(call Device
/UbiFit
)
287 DEVICE_VENDOR
:= Compex
288 DEVICE_MODEL
:= WPJ419
290 DEVICE_DTS_CONFIG
:= config@
12
294 FILESYSTEMS
:= squashfs
296 TARGET_DEVICES
+= compex_wpj419
298 define Device
/compex_wpj428
299 $(call Device
/FitImage
)
300 DEVICE_VENDOR
:= Compex
301 DEVICE_MODEL
:= WPJ428
303 DEVICE_DTS_CONFIG
:= config@
4
307 IMAGES
= sysupgrade.bin cpximg-6a04.bin
308 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
309 IMAGE
/cpximg-6a04.bin
:= append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m
0x8A2 3
310 DEVICE_PACKAGES
:= kmod-gpio-beeper
312 TARGET_DEVICES
+= compex_wpj428
314 define Device
/dlink_dap-2610
315 $(call Device
/FitImageLzma
)
316 DEVICE_VENDOR
:= D-Link
317 DEVICE_MODEL
:= DAP-2610
319 DEVICE_DTS_CONFIG
:= config@ap.dk01.1
-c1
321 WRGG_DEVNAME
:= /dev
/mtdblock
/8
322 WRGG_SIGNATURE
:= wapac30_dkbs_dap2610
324 IMAGES
:= sysupgrade.bin factory.bin
325 # Bootloader expects a special 160 byte header which is added by
327 # Factory image size must be larger than 6MB, and size in wrgg header must
328 # match actual factory image size to be flashable from D-Link http server.
329 # Bootloader verifies checksum of wrgg image before booting, thus jffs2
330 # cannot be part of the wrgg image. This is solved in the factory image by
331 # having the rootfs at the end of the image (without pad-rootfs). And in
332 # the sysupgrade image only the kernel is included in the wrgg checksum,
333 # but this is not flashable from the D-link http server.
334 # append-rootfs must start on an erase block boundary.
335 IMAGE
/factory.bin
:= append-kernel | pad-offset
6144k
160 | append-rootfs | wrgg-image | check-size
336 IMAGE
/sysupgrade.bin
:= append-kernel | wrgg-image | pad-to
$$$$(BLOCKSIZE
) | append-rootfs | pad-rootfs | check-size | append-metadata
337 DEVICE_PACKAGES
:= ipq-wifi-dlink_dap2610
339 TARGET_DEVICES
+= dlink_dap-2610
341 define Device
/engenius_eap1300
342 $(call Device
/FitImage
)
343 DEVICE_VENDOR
:= EnGenius
344 DEVICE_MODEL
:= EAP1300
345 DEVICE_DTS_CONFIG
:= config@
4
346 BOARD_NAME
:= eap1300
350 IMAGES
:= sysupgrade.bin
351 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
353 TARGET_DEVICES
+= engenius_eap1300
355 define Device
/engenius_eap2200
356 $(call Device
/FitImage
)
357 $(call Device
/UbiFit
)
358 DEVICE_VENDOR
:= EnGenius
359 DEVICE_MODEL
:= EAP2200
363 DEVICE_PACKAGES
:= ath10k-firmware-qca9888-ct ipq-wifi-engenius_eap2200
-kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
365 TARGET_DEVICES
+= engenius_eap2200
367 define Device
/engenius_emd1
368 $(call Device
/FitImage
)
369 DEVICE_VENDOR
:= EnGenius
371 DEVICE_DTS_CONFIG
:= config@
4
374 IMAGES
:= sysupgrade.bin factory.bin
375 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
376 IMAGE
/factory.bin
:= qsdk-ipq-factory-nor | check-size
378 TARGET_DEVICES
+= engenius_emd1
380 define Device
/engenius_emr3500
381 $(call Device
/FitImage
)
382 DEVICE_VENDOR
:= EnGenius
383 DEVICE_MODEL
:= EMR3500
384 DEVICE_DTS_CONFIG
:= config@
4
388 IMAGES
:= sysupgrade.bin factory.bin
389 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
390 IMAGE
/factory.bin
:= qsdk-ipq-factory-nor | check-size
392 TARGET_DEVICES
+= engenius_emr3500
394 define Device
/engenius_ens620ext
395 $(call Device
/FitImage
)
396 DEVICE_VENDOR
:= EnGenius
397 DEVICE_MODEL
:= ENS620EXT
399 DEVICE_DTS_CONFIG
:= config@
4
402 BOARD_NAME
:= ENS620EXT
405 PRODUCT_ID_NEW
:= 0xA4
412 FILESYSTEMS
:= squashfs
413 IMAGES
:= sysupgrade.bin factory_30.bin factory_35.bin
414 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
415 IMAGE
/factory_30.bin
:= append-kernel | pad-to
$$$$(KERNEL_SIZE
) | append-rootfs | pad-rootfs | check-size | SenaoFW
$$$$(PRODUCT_ID
) $$$$(FW_VER
)
416 IMAGE
/factory_35.bin
:= qsdk-ipq-factory-nor | check-size | SenaoFW
$$$$(PRODUCT_ID_NEW
) $$$$(FW_VER_NEW
)
418 TARGET_DEVICES
+= engenius_ens620ext
420 define Device
/ezviz_cs-w3-wd1200g-eup
421 $(call Device
/FitImage
)
422 DEVICE_VENDOR
:= EZVIZ
423 DEVICE_MODEL
:= CS-W3-WD1200G
424 DEVICE_VARIANT
:= EUP
425 DEVICE_DTS_CONFIG
:= config@
4
428 IMAGES
:= sysupgrade.bin
429 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | \
431 DEVICE_PACKAGES
:= -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
432 ipq-wifi-ezviz_cs-w3-wd1200g-eup
434 TARGET_DEVICES
+= ezviz_cs-w3-wd1200g-eup
436 define Device
/glinet_gl-b1300
437 $(call Device
/FitImage
)
438 DEVICE_VENDOR
:= GL.iNet
439 DEVICE_MODEL
:= GL-B1300
440 BOARD_NAME
:= gl-b1300
444 IMAGES
:= sysupgrade.bin
445 IMAGE
/sysupgrade.bin
:= append-kernel |append-rootfs | pad-rootfs | append-metadata
447 TARGET_DEVICES
+= glinet_gl-b1300
449 define Device
/linksys_ea6350v3
450 # The Linksys EA6350v3 has a uboot bootloader that does not
451 # support either booting lzma kernel images nor booting UBI
452 # partitions. This uboot, however, supports raw kernel images and
455 # As for the time of writing this, the device will boot the kernel
456 # from a fixed address with a fixed length of 3MiB. Also, the
457 # device has a hard-coded kernel command line that requieres the
458 # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
459 # Oh... and the kernel partition overlaps with the rootfs
460 # partition (the same for alt_kernel and alt_rootfs).
462 # If you are planing re-partitioning the device, you may want to
463 # keep those details in mind:
464 # 1. The kernel adresses you should honor are 0x00000000 and
465 # 0x02800000 respectively.
466 # 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
467 # 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
468 # 4. The kernel command line from uboot is harcoded to boot with
469 # rootfs either in mtd11 or mtd13.
470 $(call Device
/FitzImage
)
471 DEVICE_VENDOR
:= Linksys
472 DEVICE_MODEL
:= EA6350
480 IMAGES
:= factory.bin sysupgrade.bin
481 IMAGE
/factory.bin
:= append-kernel | append-uImage-fakehdr filesystem | pad-to
$$$$(KERNEL_SIZE
) | append-ubi | linksys-image type
=EA6350v3
482 DEVICE_PACKAGES
:= uboot-envtools
484 TARGET_DEVICES
+= linksys_ea6350v3
486 define Device
/linksys_ea8300
487 $(call Device
/FitzImage
)
488 DEVICE_VENDOR
:= Linksys
489 DEVICE_MODEL
:= EA8300
495 UBINIZE_OPTS
:= -E
5 # EOD marks to "hide" factory sig at EOF
496 IMAGES
:= sysupgrade.bin factory.bin
497 IMAGE
/factory.bin
:= append-kernel | pad-to
$$$$(KERNEL_SIZE
) | append-ubi | linksys-image type
=EA8300
498 DEVICE_PACKAGES
:= uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
500 TARGET_DEVICES
+= linksys_ea8300
502 define Device
/meraki_mr33
503 $(call Device
/FitImage
)
504 DEVICE_VENDOR
:= Cisco Meraki
509 IMAGES
= sysupgrade.bin
510 DEVICE_PACKAGES
:= -swconfig ath10k-firmware-qca9887-ct
512 TARGET_DEVICES
+= meraki_mr33
514 define Device
/mobipromo_cm520-79f
515 $(call Device
/FitzImage
)
516 $(call Device
/UbiFit
)
517 DEVICE_VENDOR
:= MobiPromo
518 DEVICE_MODEL
:= CM520-79F
522 DEVICE_PACKAGES
:= ipq-wifi-mobipromo_cm520-79f kmod-usb-ledtrig-usbport
524 TARGET_DEVICES
+= mobipromo_cm520-79f
526 define Device
/netgear_ex61x0v2
527 $(call Device
/DniImage
)
528 DEVICE_DTS_CONFIG
:= config@
4
529 NETGEAR_BOARD_ID
:= EX6150v2series
530 NETGEAR_HW_ID
:= 29765285+16+0+128+2x2
535 define Device
/netgear_ex6100v2
536 $(call Device
/netgear_ex61x0v2
)
537 DEVICE_VENDOR
:= Netgear
538 DEVICE_MODEL
:= EX6100
541 TARGET_DEVICES
+= netgear_ex6100v2
543 define Device
/netgear_ex6150v2
544 $(call Device
/netgear_ex61x0v2
)
545 DEVICE_VENDOR
:= Netgear
546 DEVICE_MODEL
:= EX6150
549 TARGET_DEVICES
+= netgear_ex6150v2
551 define Device
/openmesh_a42
552 $(call Device
/FitImageLzma
)
553 DEVICE_VENDOR
:= OpenMesh
556 DEVICE_DTS_CONFIG
:= config@om.a42
558 KERNEL
= kernel-bin | lzma | fit lzma
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb | pad-to
$$(BLOCKSIZE
)
560 IMAGES
= factory.bin sysupgrade.bin
561 IMAGE
/factory.bin
:= append-rootfs | pad-rootfs | openmesh-image ce_type
=A42
562 IMAGE
/sysupgrade.bin
/squashfs
:= append-rootfs | pad-rootfs | sysupgrade-tar rootfs
=$$$$@ | append-metadata
563 DEVICE_PACKAGES
:= uboot-envtools
565 TARGET_DEVICES
+= openmesh_a42
567 define Device
/openmesh_a62
568 $(call Device
/FitImageLzma
)
569 DEVICE_VENDOR
:= OpenMesh
572 DEVICE_DTS_CONFIG
:= config@om.a62
574 KERNEL
= kernel-bin | lzma | fit lzma
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb | pad-to
$$(BLOCKSIZE
)
576 IMAGES
= factory.bin sysupgrade.bin
577 IMAGE
/factory.bin
:= append-rootfs | pad-rootfs | openmesh-image ce_type
=A62
578 IMAGE
/sysupgrade.bin
/squashfs
:= append-rootfs | pad-rootfs | sysupgrade-tar rootfs
=$$$$@ | append-metadata
579 DEVICE_PACKAGES
:= ath10k-firmware-qca9888-ct uboot-envtools
582 TARGET_DEVICES
+= openmesh_a62
584 define Device
/qcom_ap-dk01.1
-c1
585 DEVICE_VENDOR
:= Qualcomm Atheros
586 DEVICE_MODEL
:= AP-DK01.1
588 BOARD_NAME
:= ap-dk01.1
-c1
590 DEVICE_DTS
:= qcom-ipq4019-ap.dk01.1
-c1
594 $(call Device
/FitImage
)
595 IMAGES
:= sysupgrade.bin
596 IMAGE
/sysupgrade.bin
:= append-kernel | pad-to
$$$$(KERNEL_SIZE
) | append-rootfs | pad-rootfs | append-metadata
598 TARGET_DEVICES
+= qcom_ap-dk01.1
-c1
600 define Device
/qcom_ap-dk04.1
-c1
601 $(call Device
/FitImage
)
602 $(call Device
/UbiFit
)
603 DEVICE_VENDOR
:= Qualcomm Atheros
604 DEVICE_MODEL
:= AP-DK04.1
607 DEVICE_DTS
:= qcom-ipq4019-ap.dk04.1
-c1
612 BOARD_NAME
:= ap-dk04.1
-c1
614 TARGET_DEVICES
+= qcom_ap-dk04.1
-c1
616 define Device
/qxwlan_e2600ac-c1
617 $(call Device
/FitImage
)
618 DEVICE_VENDOR
:= Qxwlan
619 DEVICE_MODEL
:= E2600AC
621 BOARD_NAME
:= e2600ac-c1
625 IMAGES
:= sysupgrade.bin
626 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
627 DEVICE_PACKAGES
:= ipq-wifi-qxwlan_e2600ac
629 TARGET_DEVICES
+= qxwlan_e2600ac-c1
631 define Device
/qxwlan_e2600ac-c2
632 $(call Device
/FitImage
)
633 $(call Device
/UbiFit
)
634 DEVICE_VENDOR
:= Qxwlan
635 DEVICE_MODEL
:= E2600AC
641 DEVICE_PACKAGES
:= ipq-wifi-qxwlan_e2600ac
643 TARGET_DEVICES
+= qxwlan_e2600ac-c2
645 define Device
/unielec_u4019-32m
646 $(call Device
/FitImage
)
647 DEVICE_VENDOR
:= Unielec
648 DEVICE_MODEL
:= U4019
649 DEVICE_VARIANT
:= 32M
650 BOARD_NAME
:= u4019-32m
654 IMAGES
:= sysupgrade.bin
655 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
657 TARGET_DEVICES
+= unielec_u4019-32m
659 define Device
/zyxel_nbg6617
660 $(call Device
/FitImageLzma
)
661 DEVICE_VENDOR
:= ZyXEL
662 DEVICE_MODEL
:= NBG6617
664 ROOTFS_SIZE
:= 24960k
666 RAS_ROOTFS_SIZE
:= 19840k
667 RAS_VERSION
:= "$(VERSION_DIST) $(REVISION)"
668 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
669 IMAGES
:= sysupgrade.bin factory.bin
670 # The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
671 # at least as large as the one of the initial firmware image (not the current
672 # one on the device). This only applies to the Web-UI, the bootlaoder ignores
673 # this minimum-size. However, the larger image can be flashed both ways.
674 IMAGE
/factory.bin
:= append-rootfs | pad-rootfs | pad-to
64k | check-size
$$$$(ROOTFS_SIZE
) | zyxel-ras-image separate-kernel
675 IMAGE
/sysupgrade.bin
/squashfs
:= append-rootfs | pad-rootfs | check-size
$$$$(ROOTFS_SIZE
) | sysupgrade-tar rootfs
=$$$$@ | append-metadata
676 DEVICE_PACKAGES
:= uboot-envtools kmod-usb-ledtrig-usbport
678 TARGET_DEVICES
+= zyxel_nbg6617
680 define Device
/zyxel_wre6606
681 $(call Device
/FitImage
)
682 DEVICE_VENDOR
:= ZyXEL
683 DEVICE_MODEL
:= WRE6606
684 DEVICE_DTS_CONFIG
:= config@
4
687 IMAGES
:= sysupgrade.bin
688 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
689 DEVICE_PACKAGES
:= -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
691 TARGET_DEVICES
+= zyxel_wre6606
693 $(eval
$(call BuildImage
))