1 include $(TOPDIR
)/rules.mk
2 include $(INCLUDE_DIR
)/image.mk
4 DEVICE_VARS
+= RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION \
5 WRGG_DEVNAME WRGG_SIGNATURE
9 KERNEL_DEPENDS
= $$(wildcard $(DTS_DIR
)/$$(DEVICE_DTS
).dts
)
10 KERNEL_INITRAMFS_PREFIX
:= $$(IMG_PREFIX
)-$(1)-initramfs
11 KERNEL_PREFIX
:= $$(IMAGE_PREFIX
)
12 KERNEL_LOADADDR
:= 0x80208000
13 DEVICE_DTS
= $$(SOC
)-$(lastword
$(subst _
, ,$(1)))
14 SUPPORTED_DEVICES
:= $(subst _
,$(comma
),$(1))
15 IMAGE
/sysupgrade.bin
= sysupgrade-tar | append-metadata
16 IMAGE
/sysupgrade.bin
/squashfs
:=
19 define Device
/FitImage
20 KERNEL_SUFFIX
:= -fit-uImage.itb
21 KERNEL
= kernel-bin | gzip | fit gzip
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb
25 define Device
/FitImageLzma
26 KERNEL_SUFFIX
:= -fit-uImage.itb
27 KERNEL
= kernel-bin | lzma | fit lzma
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb
31 define Device
/FitzImage
32 KERNEL_SUFFIX
:= -fit-zImage.itb
33 KERNEL
= kernel-bin | fit none
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb
39 IMAGES
:= nand-factory.ubi nand-sysupgrade.bin
40 IMAGE
/nand-factory.ubi
:= append-ubi
41 IMAGE
/nand-sysupgrade.bin
:= sysupgrade-tar | append-metadata
44 define Device
/DniImage
45 KERNEL_SUFFIX
:= -fit-uImage.itb
46 KERNEL
= kernel-bin | gzip | fit gzip
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb
50 IMAGES
:= factory.img sysupgrade.bin
51 IMAGE
/factory.img
:= append-kernel | pad-offset
64k
64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
52 IMAGE
/sysupgrade.bin
:= append-kernel | pad-offset
64k
64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | append-metadata
54 DEVICE_VARS
+= NETGEAR_BOARD_ID NETGEAR_HW_ID
57 -$(STAGING_DIR_HOST
)/bin
/mksenaofw \
58 -n
$(BOARD_NAME
) -r
$(VENDOR_ID
) -p
$(1) \
59 -c
$(DATECODE
) -w
$(2) -x
$(CW_VER
) -t
0 \
65 define Build
/wrgg-image
68 -d
"$(WRGG_DEVNAME)" \
69 -s
"$(WRGG_SIGNATURE)" \
74 define Device
/8dev_habanero-dvk
75 $(call Device
/FitImageLzma
)
76 DEVICE_VENDOR
:= 8devices
77 DEVICE_MODEL
:= Habanero DVK
80 DEVICE_PACKAGES
:= ipq-wifi-8dev_habanero-dvk
81 IMAGES
:= sysupgrade.bin
82 IMAGE
/sysupgrade.bin
:= append-kernel | pad-to
64k | append-rootfs | pad-rootfs | append-metadata | check-size
$$$$(IMAGE_SIZE
)
84 TARGET_DEVICES
+= 8dev_habanero-dvk
86 define Device
/8dev_jalapeno-common
87 $(call Device
/FitImage
)
94 define Device
/8dev_jalapeno
95 $(call Device
/8dev_jalapeno-common
)
96 DEVICE_VENDOR
:= 8devices
97 DEVICE_MODEL
:= Jalapeno
99 TARGET_DEVICES
+= 8dev_jalapeno
101 define Device
/alfa-network_ap120c-ac
102 $(call Device
/FitImage
)
103 $(call Device
/UbiFit
)
104 DEVICE_VENDOR
:= ALFA Network
105 DEVICE_MODEL
:= AP120C-AC
107 DEVICE_PACKAGES
:= kmod-usb-acm \
108 kmod-tpm-i2c-atmel uboot-envtools
112 IMAGES
:= nand-factory.bin nand-sysupgrade.bin
113 IMAGE
/nand-factory.bin
:= append-ubi | qsdk-ipq-factory-nand
115 TARGET_DEVICES
+= alfa-network_ap120c-ac
117 define Device
/aruba_ap-303
118 $(call Device
/FitImageLzma
)
119 DEVICE_VENDOR
:= Aruba
120 DEVICE_MODEL
:= AP-303
122 DEVICE_PACKAGES
:= ipq-wifi-aruba_ap-303
123 IMAGES
:= sysupgrade.bin
125 TARGET_DEVICES
+= aruba_ap-303
127 define Device
/aruba_ap-303h
128 $(call Device
/FitImageLzma
)
129 DEVICE_VENDOR
:= Aruba
130 DEVICE_MODEL
:= AP-303H
132 DEVICE_PACKAGES
:= ipq-wifi-aruba_ap-303
133 IMAGES
:= sysupgrade.bin
135 TARGET_DEVICES
+= aruba_ap-303h
137 define Device
/asus_map-ac2200
138 $(call Device
/FitImageLzma
)
139 DEVICE_VENDOR
:= ASUS
140 DEVICE_MODEL
:= Lyra
(MAP-AC2200
)
142 IMAGES
:= sysupgrade.bin
143 DEVICE_PACKAGES
:= ath10k-firmware-qca9888-ct kmod-ath3k
145 TARGET_DEVICES
+= asus_map-ac2200
147 define Device
/asus_rt-ac58u
148 $(call Device
/FitImageLzma
)
149 DEVICE_VENDOR
:= ASUS
150 DEVICE_MODEL
:= RT-AC58U
155 IMAGE_SIZE
:= 20439364
156 FILESYSTEMS
:= squashfs
157 # Someone - in their infinite wisdom - decided to put the firmware
158 # version in front of the image name \03\00\00\04 => Version 3.0.0.4
159 # Since u-boot works with strings we either need another fixup step
160 # to add a version... or we are very careful not to add '\0' into that
161 # string and call it a day.... Yeah, we do the latter!
162 UIMAGE_NAME
:=$(shell echo
-e
'\03\01\01\01RT-AC58U')
163 IMAGES
:= sysupgrade.bin
164 DEVICE_PACKAGES
:= -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
165 kmod-usb-ledtrig-usbport
167 TARGET_DEVICES
+= asus_rt-ac58u
169 define Device
/avm_fritzbox-4040
170 $(call Device
/FitImageLzma
)
172 DEVICE_MODEL
:= FRITZ
!Box
4040
174 BOARD_NAME
:= fritz4040
176 UBOOT_PATH
:= $(STAGING_DIR_IMAGE
)/uboot-fritz4040.bin
177 UBOOT_PARTITION_SIZE
:= 524288
178 IMAGES
= eva.bin sysupgrade.bin
179 IMAGE
/eva.bin
:= append-uboot | pad-to
$$$$(UBOOT_PARTITION_SIZE
) | append-kernel | append-rootfs | pad-rootfs
180 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
181 DEVICE_PACKAGES
:= fritz-tffs fritz-caldata
183 TARGET_DEVICES
+= avm_fritzbox-4040
185 define Device
/avm_fritzbox-7530
186 $(call Device
/FitImageLzma
)
188 DEVICE_MODEL
:= FRITZ
!Box
7530
190 DEVICE_PACKAGES
:= fritz-caldata fritz-tffs-nand
191 IMAGES
:= sysupgrade.bin
193 TARGET_DEVICES
+= avm_fritzbox-7530
195 define Device
/avm_fritzrepeater-1200
196 $(call Device
/FitImageLzma
)
198 DEVICE_MODEL
:= FRITZ
!Repeater
1200
200 DEVICE_PACKAGES
:= fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200
201 IMAGES
:= sysupgrade.bin
203 TARGET_DEVICES
+= avm_fritzrepeater-1200
205 define Device
/avm_fritzrepeater-3000
206 $(call Device
/FitImageLzma
)
208 DEVICE_MODEL
:= FRITZ
!Repeater
3000
210 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
211 IMAGES
:= sysupgrade.bin
213 TARGET_DEVICES
+= avm_fritzrepeater-3000
215 define Device
/cilab_meshpoint-one
216 $(call Device
/8dev_jalapeno-common
)
217 DEVICE_VENDOR
:= Crisis Innovation Lab
218 DEVICE_MODEL
:= MeshPoint.One
219 DEVICE_PACKAGES
:= kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
221 TARGET_DEVICES
+= cilab_meshpoint-one
223 define Device
/compex_wpj419
224 $(call Device
/FitImage
)
225 $(call Device
/UbiFit
)
226 DEVICE_VENDOR
:= Compex
227 DEVICE_MODEL
:= WPJ419
229 DEVICE_DTS_CONFIG
:= config@
12
233 FILESYSTEMS
:= squashfs
235 TARGET_DEVICES
+= compex_wpj419
237 define Device
/compex_wpj428
238 $(call Device
/FitImage
)
239 DEVICE_VENDOR
:= Compex
240 DEVICE_MODEL
:= WPJ428
242 DEVICE_DTS_CONFIG
:= config@
4
246 IMAGES
= sysupgrade.bin
247 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
248 DEVICE_PACKAGES
:= kmod-gpio-beeper
250 TARGET_DEVICES
+= compex_wpj428
252 define Device
/dlink_dap-2610
253 $(call Device
/FitImageLzma
)
254 DEVICE_VENDOR
:= D-Link
255 DEVICE_MODEL
:= DAP-2610
257 DEVICE_DTS_CONFIG
:= config@ap.dk01.1
-c1
259 WRGG_DEVNAME
:= /dev
/mtdblock
/8
260 WRGG_SIGNATURE
:= wapac30_dkbs_dap2610
262 IMAGES
:= sysupgrade.bin factory.bin
263 # Bootloader expects a special 160 byte header which is added by
265 # Factory image size must be larger than 6MB, and size in wrgg header must
266 # match actual factory image size to be flashable from D-Link http server.
267 # Bootloader verifies checksum of wrgg image before booting, thus jffs2
268 # cannot be part of the wrgg image. This is solved in the factory image by
269 # having the rootfs at the end of the image (without pad-rootfs). And in
270 # the sysupgrade image only the kernel is included in the wrgg checksum,
271 # but this is not flashable from the D-link http server.
272 # append-rootfs must start on an erase block boundary.
273 IMAGE
/factory.bin
:= append-kernel | pad-offset
6144k
160 | append-rootfs | wrgg-image | check-size
$$$$(IMAGE_SIZE
)
274 IMAGE
/sysupgrade.bin
:= append-kernel | wrgg-image | pad-to
$$$$(BLOCKSIZE
) | append-rootfs | pad-rootfs | check-size
$$$$(IMAGE_SIZE
) | append-metadata
275 DEVICE_PACKAGES
:= ipq-wifi-dlink_dap2610
277 TARGET_DEVICES
+= dlink_dap-2610
279 define Device
/engenius_eap1300
280 $(call Device
/FitImage
)
281 DEVICE_VENDOR
:= EnGenius
282 DEVICE_MODEL
:= EAP1300
283 DEVICE_DTS_CONFIG
:= config@
4
284 BOARD_NAME
:= eap1300
288 IMAGES
:= sysupgrade.bin
289 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
291 TARGET_DEVICES
+= engenius_eap1300
293 define Device
/engenius_eap2200
294 $(call Device
/FitImage
)
295 $(call Device
/UbiFit
)
296 DEVICE_VENDOR
:= EnGenius
297 DEVICE_MODEL
:= EAP2200
301 DEVICE_PACKAGES
:= ath10k-firmware-qca9888-ct ipq-wifi-engenius_eap2200
-kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
303 TARGET_DEVICES
+= engenius_eap2200
305 define Device
/engenius_emd1
306 $(call Device
/FitImage
)
307 DEVICE_VENDOR
:= EnGenius
309 DEVICE_DTS_CONFIG
:= config@
4
312 IMAGES
:= sysupgrade.bin factory.bin
313 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
314 IMAGE
/factory.bin
:= qsdk-ipq-factory-nor | check-size
$$$$(IMAGE_SIZE
)
316 TARGET_DEVICES
+= engenius_emd1
318 define Device
/engenius_ens620ext
319 $(call Device
/FitImage
)
320 DEVICE_VENDOR
:= EnGenius
321 DEVICE_MODEL
:= ENS620EXT
323 DEVICE_DTS_CONFIG
:= config@
4
326 BOARD_NAME
:= ENS620EXT
329 PRODUCT_ID_NEW
:= 0xA4
336 FILESYSTEMS
:= squashfs
337 IMAGES
:= sysupgrade.bin factory_30.bin factory_35.bin
338 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | check-size
$$$$(IMAGE_SIZE
) | append-metadata
339 IMAGE
/factory_30.bin
:= append-kernel | pad-to
$$$$(KERNEL_SIZE
) | append-rootfs | pad-rootfs | check-size
$$$$(IMAGE_SIZE
) | SenaoFW
$$$$(PRODUCT_ID
) $$$$(FW_VER
)
340 IMAGE
/factory_35.bin
:= qsdk-ipq-factory-nor | check-size
$$$$(IMAGE_SIZE
) | SenaoFW
$$$$(PRODUCT_ID_NEW
) $$$$(FW_VER_NEW
)
342 TARGET_DEVICES
+= engenius_ens620ext
344 define Device
/ezviz_cs-w3-wd1200g-eup
345 $(call Device
/FitImage
)
346 DEVICE_VENDOR
:= EZVIZ
347 DEVICE_MODEL
:= CS-W3-WD1200G
348 DEVICE_VARIANT
:= EUP
349 DEVICE_DTS_CONFIG
:= config@
4
352 IMAGES
:= sysupgrade.bin
353 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | \
355 DEVICE_PACKAGES
:= -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
356 ipq-wifi-ezviz_cs-w3-wd1200g-eup
358 TARGET_DEVICES
+= ezviz_cs-w3-wd1200g-eup
360 define Device
/glinet_gl-b1300
361 $(call Device
/FitImage
)
362 DEVICE_VENDOR
:= GL.iNet
363 DEVICE_MODEL
:= GL-B1300
364 BOARD_NAME
:= gl-b1300
368 IMAGES
:= sysupgrade.bin
369 IMAGE
/sysupgrade.bin
:= append-kernel |append-rootfs | pad-rootfs | append-metadata
371 TARGET_DEVICES
+= glinet_gl-b1300
373 define Device
/linksys_ea6350v3
374 # The Linksys EA6350v3 has a uboot bootloader that does not
375 # support either booting lzma kernel images nor booting UBI
376 # partitions. This uboot, however, supports raw kernel images and
379 # As for the time of writing this, the device will boot the kernel
380 # from a fixed address with a fixed length of 3MiB. Also, the
381 # device has a hard-coded kernel command line that requieres the
382 # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
383 # Oh... and the kernel partition overlaps with the rootfs
384 # partition (the same for alt_kernel and alt_rootfs).
386 # If you are planing re-partitioning the device, you may want to
387 # keep those details in mind:
388 # 1. The kernel adresses you should honor are 0x00000000 and
389 # 0x02800000 respectively.
390 # 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
391 # 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
392 # 4. The kernel command line from uboot is harcoded to boot with
393 # rootfs either in mtd11 or mtd13.
394 $(call Device
/FitzImage
)
395 DEVICE_VENDOR
:= Linksys
396 DEVICE_MODEL
:= EA6350
404 IMAGES
:= factory.bin sysupgrade.bin
405 IMAGE
/factory.bin
:= append-kernel | append-uImage-fakehdr filesystem | pad-to
$$$${KERNEL_SIZE} | append-ubi | linksys-image type
=EA6350v3
406 DEVICE_PACKAGES
:= uboot-envtools
408 TARGET_DEVICES
+= linksys_ea6350v3
410 define Device
/linksys_ea8300
411 $(call Device
/FitzImage
)
412 DEVICE_VENDOR
:= Linksys
413 DEVICE_MODEL
:= EA8300
419 UBINIZE_OPTS
:= -E
5 # EOD marks to "hide" factory sig at EOF
420 IMAGES
:= sysupgrade.bin factory.bin
421 IMAGE
/factory.bin
:= append-kernel | pad-to
$$$${KERNEL_SIZE} | append-ubi | linksys-image type
=EA8300
422 DEVICE_PACKAGES
:= uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
424 TARGET_DEVICES
+= linksys_ea8300
426 define Device
/meraki_mr33
427 $(call Device
/FitImage
)
428 DEVICE_VENDOR
:= Cisco Meraki
433 IMAGES
= sysupgrade.bin
434 DEVICE_PACKAGES
:= -swconfig ath10k-firmware-qca9887-ct
436 TARGET_DEVICES
+= meraki_mr33
438 define Device
/netgear_ex61x0v2
439 $(call Device
/DniImage
)
440 DEVICE_DTS_CONFIG
:= config@
4
441 NETGEAR_BOARD_ID
:= EX6150v2series
442 NETGEAR_HW_ID
:= 29765285+16+0+128+2x2
446 define Device
/netgear_ex6100v2
447 $(call Device
/netgear_ex61x0v2
)
448 DEVICE_VENDOR
:= Netgear
449 DEVICE_MODEL
:= EX6100
452 TARGET_DEVICES
+= netgear_ex6100v2
454 define Device
/netgear_ex6150v2
455 $(call Device
/netgear_ex61x0v2
)
456 DEVICE_VENDOR
:= Netgear
457 DEVICE_MODEL
:= EX6150
460 TARGET_DEVICES
+= netgear_ex6150v2
462 define Device
/openmesh_a42
463 $(call Device
/FitImageLzma
)
464 DEVICE_VENDOR
:= OpenMesh
467 DEVICE_DTS_CONFIG
:= config@om.a42
469 KERNEL
= kernel-bin | lzma | fit lzma
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb | pad-to
$$(BLOCKSIZE
)
471 IMAGES
= factory.bin sysupgrade.bin
472 IMAGE
/factory.bin
:= append-rootfs | pad-rootfs | openmesh-image ce_type
=A42
473 IMAGE
/sysupgrade.bin
/squashfs
:= append-rootfs | pad-rootfs | sysupgrade-tar rootfs
=$$$$@ | append-metadata
474 DEVICE_PACKAGES
:= uboot-envtools
476 TARGET_DEVICES
+= openmesh_a42
478 define Device
/openmesh_a62
479 $(call Device
/FitImageLzma
)
480 DEVICE_VENDOR
:= OpenMesh
483 DEVICE_DTS_CONFIG
:= config@om.a62
485 KERNEL
= kernel-bin | lzma | fit lzma
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb | pad-to
$$(BLOCKSIZE
)
487 IMAGES
= factory.bin sysupgrade.bin
488 IMAGE
/factory.bin
:= append-rootfs | pad-rootfs | openmesh-image ce_type
=A62
489 IMAGE
/sysupgrade.bin
/squashfs
:= append-rootfs | pad-rootfs | sysupgrade-tar rootfs
=$$$$@ | append-metadata
490 DEVICE_PACKAGES
:= ath10k-firmware-qca9888-ct uboot-envtools
493 TARGET_DEVICES
+= openmesh_a62
495 define Device
/qcom_ap-dk01.1
-c1
496 DEVICE_VENDOR
:= Qualcomm Atheros
497 DEVICE_MODEL
:= AP-DK01.1
499 BOARD_NAME
:= ap-dk01.1
-c1
501 DEVICE_DTS
:= qcom-ipq4019-ap.dk01.1
-c1
505 $(call Device
/FitImage
)
506 IMAGES
:= sysupgrade.bin
507 IMAGE
/sysupgrade.bin
:= append-kernel | pad-to
$$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
509 TARGET_DEVICES
+= qcom_ap-dk01.1
-c1
511 define Device
/qcom_ap-dk04.1
-c1
512 $(call Device
/FitImage
)
513 $(call Device
/UbiFit
)
514 DEVICE_VENDOR
:= Qualcomm Atheros
515 DEVICE_MODEL
:= AP-DK04.1
518 DEVICE_DTS
:= qcom-ipq4019-ap.dk04.1
-c1
523 BOARD_NAME
:= ap-dk04.1
-c1
525 TARGET_DEVICES
+= qcom_ap-dk04.1
-c1
527 define Device
/qxwlan_e2600ac-c1
528 $(call Device
/FitImage
)
529 DEVICE_VENDOR
:= Qxwlan
530 DEVICE_MODEL
:= E2600AC
532 BOARD_NAME
:= e2600ac-c1
536 IMAGES
:= sysupgrade.bin
537 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
538 DEVICE_PACKAGES
:= ipq-wifi-qxwlan_e2600ac
540 TARGET_DEVICES
+= qxwlan_e2600ac-c1
542 define Device
/qxwlan_e2600ac-c2
543 $(call Device
/FitImage
)
544 $(call Device
/UbiFit
)
545 DEVICE_VENDOR
:= Qxwlan
546 DEVICE_MODEL
:= E2600AC
552 DEVICE_PACKAGES
:= ipq-wifi-qxwlan_e2600ac
554 TARGET_DEVICES
+= qxwlan_e2600ac-c2
556 define Device
/unielec_u4019-32m
557 $(call Device
/FitImage
)
558 DEVICE_VENDOR
:= Unielec
559 DEVICE_MODEL
:= U4019
560 DEVICE_VARIANT
:= 32M
561 BOARD_NAME
:= u4019-32m
565 IMAGES
:= sysupgrade.bin
566 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
568 TARGET_DEVICES
+= unielec_u4019-32m
570 define Device
/zyxel_nbg6617
571 $(call Device
/FitImageLzma
)
572 DEVICE_VENDOR
:= ZyXEL
573 DEVICE_MODEL
:= NBG6617
575 ROOTFS_SIZE
:= 24960k
577 RAS_ROOTFS_SIZE
:= 19840k
578 RAS_VERSION
:= "$(VERSION_DIST) $(REVISION)"
579 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
580 IMAGES
:= sysupgrade.bin factory.bin
581 # The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
582 # at least as large as the one of the initial firmware image (not the current
583 # one on the device). This only applies to the Web-UI, the bootlaoder ignores
584 # this minimum-size. However, the larger image can be flashed both ways.
585 IMAGE
/factory.bin
:= append-rootfs | pad-rootfs | pad-to
64k | check-size
$$$$(ROOTFS_SIZE
) | zyxel-ras-image separate-kernel
586 IMAGE
/sysupgrade.bin
/squashfs
:= append-rootfs | pad-rootfs | check-size
$$$$(ROOTFS_SIZE
) | sysupgrade-tar rootfs
=$$$$@ | append-metadata
587 DEVICE_PACKAGES
:= uboot-envtools kmod-usb-ledtrig-usbport
589 TARGET_DEVICES
+= zyxel_nbg6617
591 define Device
/zyxel_wre6606
592 $(call Device
/FitImage
)
593 DEVICE_VENDOR
:= ZyXEL
594 DEVICE_MODEL
:= WRE6606
595 DEVICE_DTS_CONFIG
:= config@
4
597 IMAGES
:= sysupgrade.bin
598 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
599 DEVICE_PACKAGES
:= -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
601 TARGET_DEVICES
+= zyxel_wre6606
603 $(eval
$(call BuildImage
))