2 DEVICE_VARS
+= NETGEAR_BOARD_ID NETGEAR_HW_ID
3 DEVICE_VARS
+= RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
4 DEVICE_VARS
+= WRGG_DEVNAME WRGG_SIGNATURE
7 KERNEL_SUFFIX
:= -uImage.itb
8 KERNEL
= kernel-bin | gzip | fit gzip
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb
12 define Device
/FitImageLzma
13 KERNEL_SUFFIX
:= -uImage.itb
14 KERNEL
= kernel-bin | lzma | fit lzma
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb
18 define Device
/FitzImage
19 KERNEL_SUFFIX
:= -zImage.itb
20 KERNEL
= kernel-bin | fit none
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb
26 IMAGES
:= factory.ubi sysupgrade.bin
27 IMAGE
/factory.ubi
:= append-ubi
28 IMAGE
/sysupgrade.bin
:= sysupgrade-tar | append-metadata
31 define Device
/DniImage
32 $(call Device
/FitzImage
)
36 IMAGE
/factory.img
:= append-kernel | pad-offset
64k
64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
37 IMAGE
/sysupgrade.bin
:= append-kernel | pad-offset
64k
64 | append-uImage-fakehdr filesystem | \
38 append-rootfs | pad-rootfs | check-size | append-metadata
41 define Build
/append-rootfshdr
42 mkimage
-A
$(LINUX_KARCH
) \
43 -O linux
-T filesystem \
44 -C lzma
-a
$(KERNEL_LOADADDR
) -e
$(if
$(KERNEL_ENTRY
),$(KERNEL_ENTRY
),$(KERNEL_LOADADDR
)) \
45 -n root.squashfs
-d
$(IMAGE_ROOTFS
) $@.new
46 cat
$(IMAGE_KERNEL
) > $@.
$1
47 dd if
=$@.new bs
=64 count
=1 >> $@.
$1
50 define Build
/append-rutx-metadata
53 "device_code": [".*"], \
57 "supported_devices":["teltonika,rutx"] \
61 define Build
/copy-file
65 define Build
/mkmylofw_32m
66 $(eval device_id
=$(word 1,$(1)))
67 $(eval revision
=$(word 2,$(1)))
70 size
="$$(stat -c%s $@)" \
71 pad
="$(subst k,* 1024,$(BLOCKSIZE))" \
72 pad
="(pad - (size % pad)) % pad" \
73 newsize
='size + pad'; \
74 $(STAGING_DIR_HOST
)/bin
/mkmylofw \
75 -B WPE72
-i
0x11f6:$(device_id
):0x11f6:$(device_id
) -r
$(revision
) \
76 -s
0x2000000 -p0x180000
:$$newsize:al
:0x80208000:"OpenWrt":$@ \
81 define Build
/wac5xx-netgear-tar
83 mv
$@
$@.tmp
/wac5xx-ubifs-root.img
84 md5sum
$@.tmp
/wac5xx-ubifs-root.img
> $@.tmp
/wac5xx-ubifs-root.md5sum
85 echo
"WAC505 WAC510" > $@.tmp
/metadata.txt
86 echo
"WAC505_V9.9.9.9" > $@.tmp
/version
87 tar -C
$@.tmp
/ -cf
$@ .
91 define Build
/qsdk-ipq-factory-nand-askey
92 $(TOPDIR
)/scripts
/mkits-qsdk-ipq-image.sh
$@.its\
94 askey_fs
$(IMAGE_ROOTFS
) \
96 PATH
=$(LINUX_DIR
)/scripts
/dtc
:$(PATH
) mkimage
-f
$@.its
$@.new
100 define Build
/qsdk-ipq-app-gpt
101 cp
$@
$@.tmp
2>/dev
/null || true
102 ptgen
-g
-o
$@.tmp
-a
1 -l
1024 \
103 -t
0x2e -N
0:HLOS
-r
-p
32M \
104 -t
0x83 -N rootfs
-r
-p
128M \
105 -N rootfs_data
-p
512M
111 -$(STAGING_DIR_HOST
)/bin
/mksenaofw \
112 -n
$(BOARD_NAME
) -r
$(VENDOR_ID
) -p
$(1) \
113 -c
$(DATECODE
) -w
$(2) -x
$(CW_VER
) -t
0 \
119 define Build
/wrgg-image
122 -d
"$(WRGG_DEVNAME)" \
123 -s
"$(WRGG_SIGNATURE)" \
128 define Device
/8dev_habanero-dvk
129 $(call Device
/FitImageLzma
)
130 DEVICE_VENDOR
:= 8devices
131 DEVICE_MODEL
:= Habanero DVK
134 IMAGE
/sysupgrade.bin
:= append-kernel | pad-to
64k | append-rootfs | pad-rootfs | check-size | append-metadata
135 DEVICE_PACKAGES
:= ipq-wifi-8dev_habanero
137 TARGET_DEVICES
+= 8dev_habanero-dvk
139 define Device
/8dev_jalapeno-common
140 $(call Device
/FitImage
)
141 $(call Device
/UbiFit
)
145 DEVICE_PACKAGES
:= ipq-wifi-8dev_jalapeno
148 define Device
/8dev_jalapeno
149 $(call Device
/8dev_jalapeno-common
)
150 DEVICE_VENDOR
:= 8devices
151 DEVICE_MODEL
:= Jalapeno
153 TARGET_DEVICES
+= 8dev_jalapeno
155 define Device
/alfa-network_ap120c-ac
156 $(call Device
/FitImage
)
157 $(call Device
/UbiFit
)
158 DEVICE_VENDOR
:= ALFA Network
159 DEVICE_MODEL
:= AP120C-AC
161 DEVICE_PACKAGES
:= kmod-usb-acm kmod-tpm-i2c-atmel
165 IMAGES
:= factory.bin sysupgrade.bin
166 IMAGE
/factory.bin
:= append-ubi | qsdk-ipq-factory-nand
168 TARGET_DEVICES
+= alfa-network_ap120c-ac
170 define Device
/aruba_glenmorangie
171 $(call Device
/FitImageLzma
)
172 DEVICE_VENDOR
:= Aruba
176 define Device
/aruba_ap-303
177 $(call Device
/aruba_glenmorangie
)
178 DEVICE_MODEL
:= AP-303
180 TARGET_DEVICES
+= aruba_ap-303
182 define Device
/aruba_ap-303h
183 $(call Device
/aruba_glenmorangie
)
184 DEVICE_MODEL
:= AP-303H
186 TARGET_DEVICES
+= aruba_ap-303h
188 define Device
/aruba_ap-365
189 $(call Device
/aruba_glenmorangie
)
190 DEVICE_MODEL
:= AP-365
191 DEVICE_PACKAGES
:= kmod-hwmon-ad7418 ipq-wifi-aruba_ap-365
193 TARGET_DEVICES
+= aruba_ap-365
195 define Device
/asus_map-ac2200
196 $(call Device
/FitImageLzma
)
197 DEVICE_VENDOR
:= ASUS
198 DEVICE_MODEL
:= Lyra
(MAP-AC2200
)
200 DEVICE_PACKAGES
:= ath10k-firmware-qca9888-ct kmod-ath3k
202 TARGET_DEVICES
+= asus_map-ac2200
204 # WARNING: this is an initramfs image that gets you half of the way there
205 # you need to delete the jffs2 ubi volume and sysupgrade to the final image
206 # to get a "trx" you can flash via web UI for ac42u/ac58u:
207 # - change call Device/FitImageLzma to Device/FitImage
208 # - add the following below UIMAGE_NAME
209 # UIMAGE_MAGIC := 0x27051956
210 # IMAGES += factory.trx
211 # IMAGE/factory.trx := copy-file $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE) | uImage none
212 define Device
/asus_rt-ac42u
213 $(call Device
/FitImageLzma
)
214 DEVICE_VENDOR
:= ASUS
215 DEVICE_MODEL
:= RT-AC42U
216 DEVICE_ALT0_VENDOR
:= ASUS
217 DEVICE_ALT0_MODEL
:= RT-ACRH17
218 DEVICE_ALT1_VENDOR
:= ASUS
219 DEVICE_ALT1_MODEL
:= RT-AC2200
223 IMAGE_SIZE
:= 20439364
224 FILESYSTEMS
:= squashfs
225 # RT-AC82U is nowhere to be found online
226 # Rather, this device is a/k/a RT-AC42U
227 # But we'll go with what the vendor firmware has...
228 UIMAGE_NAME
:=$(shell echo
-e
'\03\01\01\01RT-AC82U')
229 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct kmod-usb-ledtrig-usbport
231 TARGET_DEVICES
+= asus_rt-ac42u
233 define Device
/asus_rt-ac58u
234 $(call Device
/FitImageLzma
)
235 DEVICE_VENDOR
:= ASUS
236 DEVICE_MODEL
:= RT-AC58U
237 DEVICE_ALT0_VENDOR
:= ASUS
238 DEVICE_ALT0_MODEL
:= RT-ACRH13
242 IMAGE_SIZE
:= 20439364
243 FILESYSTEMS
:= squashfs
244 # Someone - in their infinite wisdom - decided to put the firmware
245 # version in front of the image name \03\00\00\04 => Version 3.0.0.4
246 # Since u-boot works with strings we either need another fixup step
247 # to add a version... or we are very careful not to add '\0' into that
248 # string and call it a day.... Yeah, we do the latter!
249 UIMAGE_NAME
:=$(shell echo
-e
'\03\01\01\01RT-AC58U')
250 DEVICE_PACKAGES
:= -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
251 kmod-usb-ledtrig-usbport
253 TARGET_DEVICES
+= asus_rt-ac58u
255 define Device
/avm_fritzbox-4040
256 $(call Device
/FitImageLzma
)
258 DEVICE_MODEL
:= FRITZ
!Box
4040
260 BOARD_NAME
:= fritz4040
262 UBOOT_PATH
:= $(STAGING_DIR_IMAGE
)/uboot-fritz4040.bin
263 UBOOT_PARTITION_SIZE
:= 524288
265 IMAGE
/eva.bin
:= append-uboot | pad-to
$$$$(UBOOT_PARTITION_SIZE
) | append-kernel | append-rootfs | pad-rootfs
266 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
267 DEVICE_PACKAGES
:= fritz-tffs fritz-caldata
269 TARGET_DEVICES
+= avm_fritzbox-4040
271 define Device
/avm_fritzbox-7530
272 $(call Device
/FitImageLzma
)
274 DEVICE_MODEL
:= FRITZ
!Box
7530
275 DEVICE_ALT0_VENDOR
:= AVM
276 DEVICE_ALT0_MODEL
:= FRITZ
!Box
7520
278 DEVICE_PACKAGES
:= fritz-caldata fritz-tffs-nand ltq-vdsl-vr11-app
280 TARGET_DEVICES
+= avm_fritzbox-7530
282 define Device
/avm_fritzrepeater-1200
283 $(call Device
/FitImageLzma
)
285 DEVICE_MODEL
:= FRITZ
!Repeater
1200
287 DEVICE_PACKAGES
:= fritz-caldata fritz-tffs-nand
289 TARGET_DEVICES
+= avm_fritzrepeater-1200
291 define Device
/avm_fritzrepeater-3000
292 $(call Device
/FitImageLzma
)
294 DEVICE_MODEL
:= FRITZ
!Repeater
3000
296 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
298 TARGET_DEVICES
+= avm_fritzrepeater-3000
300 define Device
/buffalo_wtr-m2133hp
301 $(call Device
/FitImage
)
302 $(call Device
/UbiFit
)
303 DEVICE_VENDOR
:= Buffalo
304 DEVICE_MODEL
:= WTR-M2133HP
306 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct
311 #TARGET_DEVICES += buffalo_wtr-m2133hp
313 define Device
/cellc_rtl30vw
314 KERNEL_SUFFIX
:= -zImage.itb
315 KERNEL_INITRAMFS
= kernel-bin | gzip | fit gzip
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb
316 KERNEL
= kernel-bin | fit none
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb | uImage lzma | pad-to
2048
317 KERNEL_NAME
:= zImage
319 IMAGES
:= factory.bin sysupgrade.bin
320 IMAGE
/factory.bin
:= append-rootfshdr kernel | append-ubi | qsdk-ipq-factory-nand-askey kernel
321 IMAGE
/sysupgrade.bin
:= append-rootfshdr kernel | sysupgrade-tar kernel
=$$$$@.kernel | append-metadata
322 DEVICE_VENDOR
:= Cell C
323 DEVICE_MODEL
:= RTL30VW
325 DEVICE_DTS_CONFIG
:= config@
5
331 DEVICE_PACKAGES
:= kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
333 TARGET_DEVICES
+= cellc_rtl30vw
335 define Device
/cilab_meshpoint-one
336 $(call Device
/8dev_jalapeno-common
)
337 DEVICE_VENDOR
:= Crisis Innovation Lab
338 DEVICE_MODEL
:= MeshPoint.One
339 DEVICE_PACKAGES
+= kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
342 #TARGET_DEVICES += cilab_meshpoint-one
344 define Device
/compex_wpj419
345 $(call Device
/FitImage
)
346 $(call Device
/UbiFit
)
347 DEVICE_VENDOR
:= Compex
348 DEVICE_MODEL
:= WPJ419
350 DEVICE_DTS_CONFIG
:= config@
12
354 FILESYSTEMS
:= squashfs
357 #TARGET_DEVICES += compex_wpj419
359 define Device
/compex_wpj428
360 $(call Device
/FitImage
)
361 DEVICE_VENDOR
:= Compex
362 DEVICE_MODEL
:= WPJ428
364 DEVICE_DTS_CONFIG
:= config@
4
368 IMAGES
+= cpximg-6a04.bin
369 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
370 IMAGE
/cpximg-6a04.bin
:= append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m
0x8A2 3
371 DEVICE_PACKAGES
:= kmod-gpio-beeper
374 TARGET_DEVICES
+= compex_wpj428
376 define Device
/devolo_magic-2-wifi-next
377 $(call Device
/FitImage
)
378 DEVICE_VENDOR
:= devolo
379 DEVICE_MODEL
:= Magic
2 WiFi next
383 # If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
384 # it will bootm it, just like we want for the initramfs.
385 KERNEL_INITRAMFS
:= kernel-bin | gzip | fit gzip
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb | pad-to
64k |\
386 append-string
-e
'\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
389 IMAGES
:= sysupgrade.bin
390 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
391 DEVICE_PACKAGES
:= ipq-wifi-devolo_magic-2-wifi-next
395 #TARGET_DEVICES += devolo_magic-2-wifi-next
397 define Device
/dlink_dap-2610
398 $(call Device
/FitImageLzma
)
399 DEVICE_VENDOR
:= D-Link
400 DEVICE_MODEL
:= DAP-2610
402 DEVICE_DTS_CONFIG
:= config@ap.dk01.1
-c1
404 WRGG_DEVNAME
:= /dev
/mtdblock
/8
405 WRGG_SIGNATURE
:= wapac30_dkbs_dap2610
407 IMAGES
+= factory.bin
408 # Bootloader expects a special 160 byte header which is added by
410 # Factory image size must be larger than 6MB, and size in wrgg header must
411 # match actual factory image size to be flashable from D-Link http server.
412 # Bootloader verifies checksum of wrgg image before booting, thus jffs2
413 # cannot be part of the wrgg image. This is solved in the factory image by
414 # having the rootfs at the end of the image (without pad-rootfs). And in
415 # the sysupgrade image only the kernel is included in the wrgg checksum,
416 # but this is not flashable from the D-link http server.
417 # append-rootfs must start on an erase block boundary.
418 IMAGE
/factory.bin
:= append-kernel | pad-offset
6144k
160 | append-rootfs | wrgg-image | check-size
419 IMAGE
/sysupgrade.bin
:= append-kernel | wrgg-image | pad-to
$$$$(BLOCKSIZE
) | append-rootfs | pad-rootfs | check-size | append-metadata
421 TARGET_DEVICES
+= dlink_dap-2610
423 define Device
/edgecore_ecw5211
424 $(call Device
/FitImage
)
425 $(call Device
/UbiFit
)
426 DEVICE_VENDOR
:= Edgecore
427 DEVICE_MODEL
:= ECW5211
431 DEVICE_DTS_CONFIG
:= config@ap.dk01.1
-c2
432 DEVICE_PACKAGES
:= kmod-tpm-i2c-atmel kmod-usb-acm
434 TARGET_DEVICES
+= edgecore_ecw5211
436 define Device
/edgecore_oap100
437 $(call Device
/FitImage
)
438 $(call Device
/UbiFit
)
439 DEVICE_VENDOR
:= Edgecore
440 DEVICE_MODEL
:= OAP100
444 IMAGES
:= sysupgrade.bin
445 DEVICE_DTS_CONFIG
:= config@ap.dk07.1
-c1
446 DEVICE_PACKAGES
:= ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
449 #TARGET_DEVICES += edgecore_oap100
451 define Device
/engenius_eap1300
452 $(call Device
/FitImage
)
453 DEVICE_VENDOR
:= EnGenius
454 DEVICE_MODEL
:= EAP1300
455 DEVICE_DTS_CONFIG
:= config@
4
456 BOARD_NAME
:= eap1300
460 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
463 #TARGET_DEVICES += engenius_eap1300
465 define Device
/engenius_eap2200
466 $(call Device
/FitImage
)
467 $(call Device
/UbiFit
)
468 DEVICE_VENDOR
:= EnGenius
469 DEVICE_MODEL
:= EAP2200
473 DEVICE_PACKAGES
:= ath10k-firmware-qca9888-ct
-kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
476 #TARGET_DEVICES += engenius_eap2200
478 define Device
/engenius_emd1
479 $(call Device
/FitImage
)
480 DEVICE_VENDOR
:= EnGenius
482 DEVICE_DTS_CONFIG
:= config@
4
485 IMAGES
+= factory.bin
486 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
487 IMAGE
/factory.bin
:= qsdk-ipq-factory-nor | check-size
490 #TARGET_DEVICES += engenius_emd1
492 define Device
/engenius_emr3500
493 $(call Device
/FitImage
)
494 DEVICE_VENDOR
:= EnGenius
495 DEVICE_MODEL
:= EMR3500
496 DEVICE_DTS_CONFIG
:= config@
4
500 IMAGES
+= factory.bin
501 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
502 IMAGE
/factory.bin
:= qsdk-ipq-factory-nor | check-size
506 #TARGET_DEVICES += engenius_emr3500
508 define Device
/engenius_ens620ext
509 $(call Device
/FitImage
)
510 DEVICE_VENDOR
:= EnGenius
511 DEVICE_MODEL
:= ENS620EXT
513 DEVICE_DTS_CONFIG
:= config@
4
516 BOARD_NAME
:= ENS620EXT
519 PRODUCT_ID_NEW
:= 0xA4
526 FILESYSTEMS
:= squashfs
527 IMAGES
+= factory_30.bin factory_35.bin
528 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
529 IMAGE
/factory_30.bin
:= append-kernel | pad-to
$$$$(KERNEL_SIZE
) | append-rootfs | pad-rootfs | check-size | SenaoFW
$$$$(PRODUCT_ID
) $$$$(FW_VER
)
530 IMAGE
/factory_35.bin
:= qsdk-ipq-factory-nor | check-size | SenaoFW
$$$$(PRODUCT_ID_NEW
) $$$$(FW_VER_NEW
)
533 #TARGET_DEVICES += engenius_ens620ext
535 define Device
/extreme-networks_ws-ap3915i
536 $(call Device
/FitImage
)
537 DEVICE_VENDOR
:= Extreme Networks
538 DEVICE_MODEL
:= WS-AP3915i
542 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
543 DEVICE_PACKAGES
:= ipq-wifi-extreme-networks_ws-ap3915i
545 TARGET_DEVICES
+= extreme-networks_ws-ap3915i
547 define Device
/ezviz_cs-w3-wd1200g-eup
548 $(call Device
/FitImage
)
549 DEVICE_VENDOR
:= EZVIZ
550 DEVICE_MODEL
:= CS-W3-WD1200G
551 DEVICE_VARIANT
:= EUP
555 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | \
557 DEVICE_PACKAGES
:= -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
558 DEVICE_COMPAT_VERSION
:= 2.0
559 DEVICE_COMPAT_MESSAGE
:= uboot
's bootcmd has to be updated (see wiki). \
560 Upgrade via sysupgrade mechanism is not possible.
563 #TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
565 define Device/glinet_gl-a1300
566 $(call Device/FitImage)
567 $(call Device/UbiFit)
568 DEVICE_VENDOR := GL.iNet
569 DEVICE_MODEL := GL-A1300
571 DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
574 IMAGE_SIZE := 131072k
575 DEVICE_PACKAGE := ipq-wifi-glinet_gl-a1300
577 TARGET_DEVICES += glinet_gl-a1300
579 define Device/glinet_gl-ap1300
580 $(call Device/FitImage)
581 $(call Device/UbiFit)
582 DEVICE_VENDOR := GL.iNet
583 DEVICE_MODEL := GL-AP1300
585 DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
588 IMAGE_SIZE := 131072k
590 DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300 kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
592 TARGET_DEVICES += glinet_gl-ap1300
594 define Device/glinet_gl-b1300
595 $(call Device/FitzImage)
596 DEVICE_VENDOR := GL.iNet
597 DEVICE_MODEL := GL-B1300
598 BOARD_NAME := gl-b1300
602 IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
604 TARGET_DEVICES += glinet_gl-b1300
606 define Device/glinet_gl-b2200
607 $(call Device/FitzImage)
608 DEVICE_VENDOR := GL.iNet
609 DEVICE_MODEL := GL-B2200
611 DEVICE_DTS_CONFIG := config@ap.dk04.1-c3
612 KERNEL_INITRAMFS_SUFFIX := -recovery.itb
613 IMAGES := emmc.img.gz sysupgrade.bin
614 IMAGE/emmc.img.gz := qsdk-ipq-app-gpt |\
615 pad-to 1024k | append-kernel |\
616 pad-to 33792k | append-rootfs |\
617 append-metadata | gzip
618 IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
619 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct \
620 kmod-fs-ext4 kmod-mmc kmod-spi-dev mkf2fs e2fsprogs kmod-fs-f2fs
622 TARGET_DEVICES += glinet_gl-b2200
624 define Device/glinet_gl-s1300
625 $(call Device/FitzImage)
626 DEVICE_VENDOR := GL.iNet
627 DEVICE_MODEL := GL-S1300
631 IMAGES := sysupgrade.bin
632 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
633 DEVICE_PACKAGES := ipq-wifi-glinet_gl-s1300 kmod-fs-ext4 kmod-mmc kmod-spi-dev
636 #TARGET_DEVICES += glinet_gl-s1300
638 define Device/kernel-size-6350-8300
639 DEVICE_COMPAT_VERSION := 2.0
640 DEVICE_COMPAT_MESSAGE := Kernel partition size must be increased for \
641 this OpenWrt version. Before continuing, you MUST issue either the \
642 command "fw_setenv kernsize 500000" from the OpenWrt command line, \
643 or "setenv kernsize 500000 ; saveenv" from the U-Boot serial console. \
644 Instead of the sysupgrade image, you must then install the OpenWrt \
645 factory image, setting the force flag and wiping the configuration. \
646 (e.g. "sysupgrade -n -F openwrt-squashfs-factory.bin" on command line)
649 define Device/linksys_ea6350v3
650 # The Linksys EA6350v3 has a uboot bootloader that does not
651 # support either booting lzma kernel images nor booting UBI
652 # partitions. This uboot, however, supports raw kernel images and
655 # As configured by the OEM factory, the device will boot the kernel
656 # from a fixed address with a fixed length of 3 MiB. Also, the
657 # device has a hard-coded kernel command line that requires the
658 # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
659 # Oh... and the kernel partition overlaps with the rootfs
660 # partition (the same for alt_kernel and alt_rootfs).
662 # If you are planing re-partitioning the device, you may want to
663 # keep these details in mind:
664 # 1. The kernel addresses you should honor are 0x00000000 and
665 # 0x02800000 respectively.
666 # 2. The kernel size (plus the dtb) cannot exceed 3 MiB in size
667 # unless the uboot environment variable "kernsize" is increased.
668 # 3. You can use 'zImage
', but not a raw 'Image
' packed with lzma.
669 # 4. The kernel command line from uboot is harcoded to boot with
670 # rootfs either in mtd11 or mtd13.
671 $(call Device/FitzImage)
672 $(call Device/kernel-size-6350-8300)
673 DEVICE_VENDOR := Linksys
674 DEVICE_MODEL := EA6350
682 IMAGES += factory.bin
683 IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
685 TARGET_DEVICES += linksys_ea6350v3
687 define Device/linksys_ea8300
688 $(call Device/FitzImage)
689 $(call Device/kernel-size-6350-8300)
690 DEVICE_VENDOR := Linksys
691 DEVICE_MODEL := EA8300
697 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
698 IMAGES += factory.bin
699 IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
700 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
702 TARGET_DEVICES += linksys_ea8300
704 define Device/linksys_mr8300
705 $(call Device/FitzImage)
706 $(call Device/kernel-size-6350-8300)
707 DEVICE_VENDOR := Linksys
708 DEVICE_MODEL := MR8300
714 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
715 IMAGES += factory.bin
716 IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
717 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
719 TARGET_DEVICES += linksys_mr8300
721 define Device/linksys_whw03v2
722 $(call Device/FitzImage)
723 DEVICE_VENDOR := Linksys
724 DEVICE_MODEL := WHW03
728 IMAGE_SIZE := 158720k
731 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
732 IMAGES += factory.bin
733 IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW03v2
734 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_whw03v2 kmod-leds-pca963x kmod-spi-dev kmod-bluetooth
736 TARGET_DEVICES += linksys_whw03v2
738 define Device/linksys_whw01
739 $(call Device/FitzImage)
740 DEVICE_VENDOR := Linksys
741 DEVICE_MODEL := WHW01
747 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
748 IMAGES += factory.bin
749 IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW01
750 DEVICE_PACKAGES := uboot-envtools kmod-leds-pca963x
752 TARGET_DEVICES += linksys_whw01
754 define Device/luma_wrtq-329acn
755 $(call Device/FitImage)
756 DEVICE_VENDOR := Luma Home
757 DEVICE_MODEL := WRTQ-329ACN
759 DEVICE_PACKAGES := kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio
764 TARGET_DEVICES += luma_wrtq-329acn
766 define Device/meraki_mr33
767 $(call Device/FitImage)
768 DEVICE_VENDOR := Cisco Meraki
773 DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
775 TARGET_DEVICES += meraki_mr33
777 define Device/meraki_mr74
778 $(call Device/FitImage)
779 DEVICE_VENDOR := Cisco Meraki
784 DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
785 DEVICE_DTS_CONFIG := config@3
787 TARGET_DEVICES += meraki_mr74
789 define Device/mobipromo_cm520-79f
790 $(call Device/FitzImage)
791 $(call Device/UbiFit)
792 DEVICE_VENDOR := MobiPromo
793 DEVICE_MODEL := CM520-79F
797 DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
799 TARGET_DEVICES += mobipromo_cm520-79f
801 define Device/netgear_ex61x0v2
802 $(call Device/DniImage)
803 DEVICE_VENDOR := NETGEAR
804 DEVICE_DTS_CONFIG := config@4
805 NETGEAR_BOARD_ID := EX6150v2series
806 NETGEAR_HW_ID := 29765285+16+0+128+2x2
811 define Device/netgear_ex6100v2
812 $(call Device/netgear_ex61x0v2)
813 DEVICE_MODEL := EX6100
816 TARGET_DEVICES += netgear_ex6100v2
818 define Device/netgear_ex6150v2
819 $(call Device/netgear_ex61x0v2)
820 DEVICE_MODEL := EX6150
823 TARGET_DEVICES += netgear_ex6150v2
825 define Device/netgear_orbi
826 $(call Device/DniImage)
828 DEVICE_VENDOR := NETGEAR
829 IMAGE/factory.img := append-kernel | pad-offset 128k 64 | \
830 append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | \
831 append-rootfs | pad-rootfs | netgear-dni
832 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | \
833 sysupgrade-tar rootfs=$$$$@ | append-metadata
834 DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
837 define Device/netgear_rbx50
838 $(call Device/netgear_orbi)
839 NETGEAR_HW_ID := 29765352+0+4000+512+2x2+2x2+4x4
840 KERNEL_SIZE := 3932160
841 ROOTFS_SIZE := 32243712
842 IMAGE_SIZE := 36175872
845 define Device/netgear_rbr50
846 $(call Device/netgear_rbx50)
847 DEVICE_MODEL := RBR50
849 NETGEAR_BOARD_ID := RBR50
851 TARGET_DEVICES += netgear_rbr50
853 define Device/netgear_rbs50
854 $(call Device/netgear_rbx50)
855 DEVICE_MODEL := RBS50
857 NETGEAR_BOARD_ID := RBS50
859 TARGET_DEVICES += netgear_rbs50
861 define Device/netgear_srx60
862 $(call Device/netgear_orbi)
863 NETGEAR_HW_ID := 29765352+0+4096+512+2x2+2x2+4x4
864 KERNEL_SIZE := 3932160
865 ROOTFS_SIZE := 32243712
866 IMAGE_SIZE := 36175872
869 define Device/netgear_srr60
870 $(call Device/netgear_srx60)
871 DEVICE_MODEL := SRR60
872 NETGEAR_BOARD_ID := SRR60
874 TARGET_DEVICES += netgear_srr60
876 define Device/netgear_srs60
877 $(call Device/netgear_srx60)
878 DEVICE_MODEL := SRS60
879 NETGEAR_BOARD_ID := SRS60
881 TARGET_DEVICES += netgear_srs60
883 define Device/netgear_wac510
884 $(call Device/FitImage)
885 $(call Device/UbiFit)
886 DEVICE_VENDOR := Netgear
887 DEVICE_MODEL := WAC510
889 DEVICE_DTS_CONFIG := config@5
892 IMAGES += factory.tar
893 IMAGE/factory.tar := append-ubi | wac5xx-netgear-tar
894 DEVICE_PACKAGES := uboot-envtools
896 TARGET_DEVICES += netgear_wac510
898 define Device/openmesh_a42
899 $(call Device/FitImageLzma)
900 DEVICE_VENDOR := OpenMesh
903 DEVICE_DTS_CONFIG := config@om.a42
905 KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
907 IMAGES += factory.bin
908 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
909 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
911 TARGET_DEVICES += openmesh_a42
913 define Device/openmesh_a62
914 $(call Device/FitImageLzma)
915 DEVICE_VENDOR := OpenMesh
918 DEVICE_DTS_CONFIG := config@om.a62
920 KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
922 IMAGES += factory.bin
923 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
924 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
925 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
927 TARGET_DEVICES += openmesh_a62
929 define Device/p2w_r619ac
930 $(call Device/FitzImage)
931 $(call Device/UbiFit)
933 DEVICE_MODEL := R619AC
935 DEVICE_DTS_CONFIG := config@10
938 DEVICE_PACKAGES := ipq-wifi-p2w_r619ac
941 define Device/p2w_r619ac-64m
942 $(call Device/p2w_r619ac)
943 DEVICE_VARIANT := 64M NAND
944 IMAGES += factory.bin
945 IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
947 TARGET_DEVICES += p2w_r619ac-64m
949 define Device/p2w_r619ac-128m
950 $(call Device/p2w_r619ac)
951 DEVICE_VARIANT := 128M NAND
953 TARGET_DEVICES += p2w_r619ac-128m
955 define Device/pakedge_wr-1
956 $(call Device/FitImageLzma)
957 DEVICE_VENDOR := Pakedge
959 DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
960 DEVICE_PACKAGES := ipq-wifi-pakedge_wr-1
964 IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | append-metadata
966 TARGET_DEVICES += pakedge_wr-1
968 define Device/plasmacloud_pa1200
969 $(call Device/FitImageLzma)
970 DEVICE_VENDOR := Plasma Cloud
971 DEVICE_MODEL := PA1200
973 DEVICE_DTS_CONFIG := config@pc.pa1200
975 KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
977 IMAGES += factory.bin
978 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
979 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
981 TARGET_DEVICES += plasmacloud_pa1200
983 define Device/plasmacloud_pa2200
984 $(call Device/FitImageLzma)
985 DEVICE_VENDOR := Plasma Cloud
986 DEVICE_MODEL := PA2200
988 DEVICE_DTS_CONFIG := config@pc.pa2200
990 KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
992 IMAGES += factory.bin
993 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
994 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
995 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
997 TARGET_DEVICES += plasmacloud_pa2200
999 define Device/qcom_ap-dk01.1-c1
1000 DEVICE_VENDOR := Qualcomm Atheros
1001 DEVICE_MODEL := AP-DK01.1
1002 DEVICE_VARIANT := C1
1003 BOARD_NAME := ap-dk01.1-c1
1005 DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
1007 KERNEL_SIZE := 4096k
1008 IMAGE_SIZE := 26624k
1009 $(call Device/FitImage)
1010 IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
1013 TARGET_DEVICES += qcom_ap-dk01.1-c1
1015 define Device/qcom_ap-dk04.1-c1
1016 $(call Device/FitImage)
1017 $(call Device/UbiFit)
1018 DEVICE_VENDOR := Qualcomm Atheros
1019 DEVICE_MODEL := AP-DK04.1
1020 DEVICE_VARIANT := C1
1022 DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
1024 KERNEL_SIZE := 4048k
1027 BOARD_NAME := ap-dk04.1-c1
1030 TARGET_DEVICES += qcom_ap-dk04.1-c1
1032 define Device/qxwlan_e2600ac-c1
1033 $(call Device/FitImage)
1034 DEVICE_VENDOR := Qxwlan
1035 DEVICE_MODEL := E2600AC
1036 DEVICE_VARIANT := C1
1037 BOARD_NAME := e2600ac-c1
1039 KERNEL_SIZE := 4096k
1040 IMAGE_SIZE := 31232k
1041 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1042 DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c1
1046 #TARGET_DEVICES += qxwlan_e2600ac-c1
1048 define Device/qxwlan_e2600ac-c2
1049 $(call Device/FitImage)
1050 $(call Device/UbiFit)
1051 DEVICE_VENDOR := Qxwlan
1052 DEVICE_MODEL := E2600AC
1053 DEVICE_VARIANT := C2
1058 DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c2
1061 #TARGET_DEVICES += qxwlan_e2600ac-c2
1063 define Device/sony_ncp-hg100-cellular
1064 $(call Device/FitImage)
1065 DEVICE_VENDOR := Sony
1066 DEVICE_MODEL := NCP-HG100/Cellular
1067 DEVICE_DTS_CONFIG := config@ap.dk04.1-c4
1069 KERNEL_SIZE := 8192k
1071 DEVICE_PACKAGES := e2fsprogs ipq-wifi-sony_ncp-hg100-cellular \
1074 TARGET_DEVICES += sony_ncp-hg100-cellular
1076 define Device/teltonika_rutx10
1077 $(call Device/FitImage)
1078 $(call Device/UbiFit)
1079 DEVICE_VENDOR := Teltonika
1080 DEVICE_MODEL := RUTX10
1082 DEVICE_DTS_CONFIG := config@5
1086 FILESYSTEMS := squashfs
1087 IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
1088 DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-bluetooth
1091 #TARGET_DEVICES += teltonika_rutx10
1093 define Device/tel_x1pro
1094 $(call Device/FitImage)
1095 DEVICE_VENDOR := Telco
1096 DEVICE_MODEL := X1 Pro
1098 KERNEL_SIZE := 4096k
1099 IMAGE_SIZE := 31232k
1100 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1101 DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1105 #TARGET_DEVICES += tel_x1pro
1107 define Device/unielec_u4019-32m
1108 $(call Device/FitImage)
1109 DEVICE_VENDOR := Unielec
1110 DEVICE_MODEL := U4019
1111 DEVICE_VARIANT := 32M
1112 BOARD_NAME := u4019-32m
1114 KERNEL_SIZE := 4096k
1115 IMAGE_SIZE := 31232k
1116 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1120 #TARGET_DEVICES += unielec_u4019-32m
1122 define Device/wallys_dr40x9
1123 $(call Device/FitImage)
1124 $(call Device/UbiFit)
1125 DEVICE_VENDOR := Wallys
1126 DEVICE_MODEL := DR40X9
1128 DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
1131 DEVICE_PACKAGES := ipq-wifi-wallys_dr40x9
1133 TARGET_DEVICES += wallys_dr40x9
1135 define Device/zte_mf18a
1136 $(call Device/FitImage)
1137 DEVICE_VENDOR := ZTE
1138 DEVICE_MODEL := MF18A
1140 DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
1144 DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct ipq-wifi-zte_mf18a
1146 TARGET_DEVICES += zte_mf18a
1148 define Device/zte_mf28x_common
1149 $(call Device/FitzImage)
1150 DEVICE_VENDOR := ZTE
1152 DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
1156 DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1159 define Device/zte_mf286d
1160 $(call Device/zte_mf28x_common)
1161 DEVICE_MODEL := MF286D
1163 TARGET_DEVICES += zte_mf286d
1165 define Device/zte_mf289f
1166 $(call Device/zte_mf28x_common)
1167 DEVICE_MODEL := MF289F
1168 DEVICE_PACKAGES += ipq-wifi-zte_mf289f ath10k-firmware-qca9984-ct
1170 TARGET_DEVICES += zte_mf289f
1172 define Device/zyxel_nbg6617
1173 $(call Device/FitImageLzma)
1174 DEVICE_VENDOR := ZyXEL
1175 DEVICE_MODEL := NBG6617
1177 KERNEL_SIZE := 4096k
1178 ROOTFS_SIZE := 24960k
1179 RAS_BOARD := NBG6617
1180 RAS_ROOTFS_SIZE := 19840k
1181 RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
1182 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1183 IMAGES += factory.bin
1184 # The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
1185 # at least as large as the one of the initial firmware image (not the current
1186 # one on the device). This only applies to the Web-UI, the bootlaoder ignores
1187 # this minimum-size. However, the larger image can be flashed both ways.
1188 IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
1189 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
1190 DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
1192 TARGET_DEVICES += zyxel_nbg6617
1194 define Device/zyxel_wre6606
1195 $(call Device/FitImage)
1196 DEVICE_VENDOR := ZyXEL
1197 DEVICE_MODEL := WRE6606
1198 DEVICE_DTS_CONFIG := config@4
1200 IMAGE_SIZE := 13184k
1201 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
1202 DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
1205 #TARGET_DEVICES += zyxel_wre6606