2 DEVICE_VARS
+= NETGEAR_BOARD_ID NETGEAR_HW_ID
3 DEVICE_VARS
+= RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
4 DEVICE_VARS
+= WRGG_DEVNAME WRGG_SIGNATURE
7 KERNEL_SUFFIX
:= -fit-uImage.itb
8 KERNEL
= kernel-bin | gzip | fit gzip
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb
12 define Device
/FitImageLzma
13 KERNEL_SUFFIX
:= -fit-uImage.itb
14 KERNEL
= kernel-bin | lzma | fit lzma
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb
18 define Device
/FitzImage
19 KERNEL_SUFFIX
:= -fit-zImage.itb
20 KERNEL
= kernel-bin | fit none
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb
26 IMAGES
:= nand-factory.ubi nand-sysupgrade.bin
27 IMAGE
/nand-factory.ubi
:= append-ubi
28 IMAGE
/nand-sysupgrade.bin
:= sysupgrade-tar | append-metadata
31 define Device
/DniImage
32 $(call Device
/FitzImage
)
36 IMAGE
/factory.img
:= append-kernel | pad-offset
64k
64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
37 IMAGE
/sysupgrade.bin
:= append-kernel | pad-offset
64k
64 | append-uImage-fakehdr filesystem | \
38 append-rootfs | pad-rootfs | check-size | append-metadata
41 define Build
/append-rootfshdr
42 mkimage
-A
$(LINUX_KARCH
) \
43 -O linux
-T filesystem \
44 -C lzma
-a
$(KERNEL_LOADADDR
) -e
$(if
$(KERNEL_ENTRY
),$(KERNEL_ENTRY
),$(KERNEL_LOADADDR
)) \
45 -n root.squashfs
-d
$(IMAGE_ROOTFS
) $@.new
46 cat
$(IMAGE_KERNEL
) > $@.
$1
47 dd if
=$@.new bs
=64 count
=1 >> $@.
$1
50 define Build
/append-rutx-metadata
53 "device_code": [".*"], \
57 "supported_devices":["teltonika,rutx"] \
61 define Build
/copy-file
65 define Build
/mkmylofw_32m
66 $(eval device_id
=$(word 1,$(1)))
67 $(eval revision
=$(word 2,$(1)))
70 size
="$$(stat -c%s $@)" \
71 pad
="$(subst k,* 1024,$(BLOCKSIZE))" \
72 pad
="(pad - (size % pad)) % pad" \
73 newsize
='size + pad'; \
74 $(STAGING_DIR_HOST
)/bin
/mkmylofw \
75 -B WPE72
-i
0x11f6:$(device_id
):0x11f6:$(device_id
) -r
$(revision
) \
76 -s
0x2000000 -p0x180000
:$$newsize:al
:0x80208000:"OpenWrt":$@ \
81 define Build
/wac5xx-netgear-tar
83 mv
$@
$@.tmp
/wac5xx-ubifs-root.img
84 md5sum
$@.tmp
/wac5xx-ubifs-root.img
> $@.tmp
/wac5xx-ubifs-root.md5sum
85 echo
"WAC505 WAC510" > $@.tmp
/metadata.txt
86 echo
"WAC505_V9.9.9.9" > $@.tmp
/version
87 tar -C
$@.tmp
/ -cf
$@ .
91 define Build
/qsdk-ipq-factory-nand-askey
92 $(TOPDIR
)/scripts
/mkits-qsdk-ipq-image.sh
$@.its\
94 askey_fs
$(IMAGE_ROOTFS
) \
96 PATH
=$(LINUX_DIR
)/scripts
/dtc
:$(PATH
) mkimage
-f
$@.its
$@.new
100 define Build
/qsdk-ipq-app-gpt
101 cp
$@
$@.tmp
2>/dev
/null || true
102 ptgen
-g
-o
$@.tmp
-a
1 -l
1024 \
103 -t
0x2e -N
0:HLOS
-r
-p
32M \
104 -t
0x83 -N rootfs
-r
-p
128M \
105 -N rootfs_data
-p
512M
111 -$(STAGING_DIR_HOST
)/bin
/mksenaofw \
112 -n
$(BOARD_NAME
) -r
$(VENDOR_ID
) -p
$(1) \
113 -c
$(DATECODE
) -w
$(2) -x
$(CW_VER
) -t
0 \
119 define Build
/wrgg-image
122 -d
"$(WRGG_DEVNAME)" \
123 -s
"$(WRGG_SIGNATURE)" \
128 define Device
/8dev_habanero-dvk
129 $(call Device
/FitImageLzma
)
130 DEVICE_VENDOR
:= 8devices
131 DEVICE_MODEL
:= Habanero DVK
134 IMAGE
/sysupgrade.bin
:= append-kernel | pad-to
64k | append-rootfs | pad-rootfs | check-size | append-metadata
136 TARGET_DEVICES
+= 8dev_habanero-dvk
138 define Device
/8dev_jalapeno-common
139 $(call Device
/FitImage
)
140 $(call Device
/UbiFit
)
146 define Device
/8dev_jalapeno
147 $(call Device
/8dev_jalapeno-common
)
148 DEVICE_VENDOR
:= 8devices
149 DEVICE_MODEL
:= Jalapeno
151 TARGET_DEVICES
+= 8dev_jalapeno
153 define Device
/alfa-network_ap120c-ac
154 $(call Device
/FitImage
)
155 $(call Device
/UbiFit
)
156 DEVICE_VENDOR
:= ALFA Network
157 DEVICE_MODEL
:= AP120C-AC
159 DEVICE_PACKAGES
:= kmod-usb-acm kmod-tpm-i2c-atmel
163 IMAGES
:= nand-factory.bin nand-sysupgrade.bin
164 IMAGE
/nand-factory.bin
:= append-ubi | qsdk-ipq-factory-nand
166 TARGET_DEVICES
+= alfa-network_ap120c-ac
168 define Device
/aruba_glenmorangie
169 $(call Device
/FitImageLzma
)
170 DEVICE_VENDOR
:= Aruba
174 define Device
/aruba_ap-303
175 $(call Device
/aruba_glenmorangie
)
176 DEVICE_MODEL
:= AP-303
178 TARGET_DEVICES
+= aruba_ap-303
180 define Device
/aruba_ap-303h
181 $(call Device
/aruba_glenmorangie
)
182 DEVICE_MODEL
:= AP-303H
184 TARGET_DEVICES
+= aruba_ap-303h
186 define Device
/aruba_ap-365
187 $(call Device
/aruba_glenmorangie
)
188 DEVICE_MODEL
:= AP-365
189 DEVICE_PACKAGES
:= kmod-hwmon-ad7418 ipq-wifi-aruba_ap-365
191 TARGET_DEVICES
+= aruba_ap-365
193 define Device
/asus_map-ac2200
194 $(call Device
/FitImageLzma
)
195 DEVICE_VENDOR
:= ASUS
196 DEVICE_MODEL
:= Lyra
(MAP-AC2200
)
198 DEVICE_PACKAGES
:= ath10k-firmware-qca9888-ct kmod-ath3k
200 TARGET_DEVICES
+= asus_map-ac2200
202 # WARNING: this is an initramfs image that gets you half of the way there
203 # you need to delete the jffs2 ubi volume and sysupgrade to the final image
204 # to get a "trx" you can flash via web UI for ac42u/ac58u:
205 # - change call Device/FitImageLzma to Device/FitImage
206 # - add the following below UIMAGE_NAME
207 # UIMAGE_MAGIC := 0x27051956
208 # IMAGES += factory.trx
209 # IMAGE/factory.trx := copy-file $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE) | uImage none
210 define Device
/asus_rt-ac42u
211 $(call Device
/FitImageLzma
)
212 DEVICE_VENDOR
:= ASUS
213 DEVICE_MODEL
:= RT-AC42U
214 DEVICE_ALT0_VENDOR
:= ASUS
215 DEVICE_ALT0_MODEL
:= RT-ACRH17
216 DEVICE_ALT1_VENDOR
:= ASUS
217 DEVICE_ALT1_MODEL
:= RT-AC2200
221 IMAGE_SIZE
:= 20439364
222 FILESYSTEMS
:= squashfs
223 # RT-AC82U is nowhere to be found online
224 # Rather, this device is a/k/a RT-AC42U
225 # But we'll go with what the vendor firmware has...
226 UIMAGE_NAME
:=$(shell echo
-e
'\03\01\01\01RT-AC82U')
227 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct kmod-usb-ledtrig-usbport
229 TARGET_DEVICES
+= asus_rt-ac42u
231 define Device
/asus_rt-ac58u
232 $(call Device
/FitImageLzma
)
233 DEVICE_VENDOR
:= ASUS
234 DEVICE_MODEL
:= RT-AC58U
235 DEVICE_ALT0_VENDOR
:= ASUS
236 DEVICE_ALT0_MODEL
:= RT-ACRH13
240 IMAGE_SIZE
:= 20439364
241 FILESYSTEMS
:= squashfs
242 # Someone - in their infinite wisdom - decided to put the firmware
243 # version in front of the image name \03\00\00\04 => Version 3.0.0.4
244 # Since u-boot works with strings we either need another fixup step
245 # to add a version... or we are very careful not to add '\0' into that
246 # string and call it a day.... Yeah, we do the latter!
247 UIMAGE_NAME
:=$(shell echo
-e
'\03\01\01\01RT-AC58U')
248 DEVICE_PACKAGES
:= -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
249 kmod-usb-ledtrig-usbport
251 TARGET_DEVICES
+= asus_rt-ac58u
253 define Device
/avm_fritzbox-4040
254 $(call Device
/FitImageLzma
)
256 DEVICE_MODEL
:= FRITZ
!Box
4040
258 BOARD_NAME
:= fritz4040
260 UBOOT_PATH
:= $(STAGING_DIR_IMAGE
)/uboot-fritz4040.bin
261 UBOOT_PARTITION_SIZE
:= 524288
263 IMAGE
/eva.bin
:= append-uboot | pad-to
$$$$(UBOOT_PARTITION_SIZE
) | append-kernel | append-rootfs | pad-rootfs
264 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
265 DEVICE_PACKAGES
:= fritz-tffs fritz-caldata
267 TARGET_DEVICES
+= avm_fritzbox-4040
269 define Device
/avm_fritzbox-7530
270 $(call Device
/FitImageLzma
)
272 DEVICE_MODEL
:= FRITZ
!Box
7530
273 DEVICE_ALT0_VENDOR
:= AVM
274 DEVICE_ALT0_MODEL
:= FRITZ
!Box
7520
276 DEVICE_PACKAGES
:= fritz-caldata fritz-tffs-nand
278 TARGET_DEVICES
+= avm_fritzbox-7530
280 define Device
/avm_fritzrepeater-1200
281 $(call Device
/FitImageLzma
)
283 DEVICE_MODEL
:= FRITZ
!Repeater
1200
285 DEVICE_PACKAGES
:= fritz-caldata fritz-tffs-nand
287 TARGET_DEVICES
+= avm_fritzrepeater-1200
289 define Device
/avm_fritzrepeater-3000
290 $(call Device
/FitImageLzma
)
292 DEVICE_MODEL
:= FRITZ
!Repeater
3000
294 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
296 TARGET_DEVICES
+= avm_fritzrepeater-3000
298 define Device
/buffalo_wtr-m2133hp
299 $(call Device
/FitImage
)
300 $(call Device
/UbiFit
)
301 DEVICE_VENDOR
:= Buffalo
302 DEVICE_MODEL
:= WTR-M2133HP
304 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct
308 TARGET_DEVICES
+= buffalo_wtr-m2133hp
310 define Device
/cellc_rtl30vw
311 KERNEL_SUFFIX
:= -fit-zImage.itb
312 KERNEL_INITRAMFS
= kernel-bin | gzip | fit gzip
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb
313 KERNEL
= kernel-bin | fit none
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb | uImage lzma | pad-to
2048
314 KERNEL_NAME
:= zImage
316 IMAGES
:= nand-factory.bin nand-sysupgrade.bin
317 IMAGE
/nand-factory.bin
:= append-rootfshdr kernel | append-ubi | qsdk-ipq-factory-nand-askey kernel
318 IMAGE
/nand-sysupgrade.bin
:= append-rootfshdr kernel | sysupgrade-tar kernel
=$$$$@.kernel | append-metadata
319 DEVICE_VENDOR
:= Cell C
320 DEVICE_MODEL
:= RTL30VW
322 DEVICE_DTS_CONFIG
:= config@
5
328 DEVICE_PACKAGES
:= kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
330 TARGET_DEVICES
+= cellc_rtl30vw
332 define Device
/cilab_meshpoint-one
333 $(call Device
/8dev_jalapeno-common
)
334 DEVICE_VENDOR
:= Crisis Innovation Lab
335 DEVICE_MODEL
:= MeshPoint.One
336 DEVICE_PACKAGES
:= kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
338 TARGET_DEVICES
+= cilab_meshpoint-one
340 define Device
/compex_wpj419
341 $(call Device
/FitImage
)
342 $(call Device
/UbiFit
)
343 DEVICE_VENDOR
:= Compex
344 DEVICE_MODEL
:= WPJ419
346 DEVICE_DTS_CONFIG
:= config@
12
350 FILESYSTEMS
:= squashfs
352 TARGET_DEVICES
+= compex_wpj419
354 define Device
/compex_wpj428
355 $(call Device
/FitImage
)
356 DEVICE_VENDOR
:= Compex
357 DEVICE_MODEL
:= WPJ428
359 DEVICE_DTS_CONFIG
:= config@
4
363 IMAGES
+= cpximg-6a04.bin
364 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
365 IMAGE
/cpximg-6a04.bin
:= append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m
0x8A2 3
366 DEVICE_PACKAGES
:= kmod-gpio-beeper
369 TARGET_DEVICES
+= compex_wpj428
371 define Device
/devolo_magic-2-wifi-next
372 $(call Device
/FitImage
)
373 DEVICE_VENDOR
:= devolo
374 DEVICE_MODEL
:= Magic
2 WiFi next
378 # If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
379 # it will bootm it, just like we want for the initramfs.
380 KERNEL_INITRAMFS
:= kernel-bin | gzip | fit gzip
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb | pad-to
64k |\
381 append-string
-e
'\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
384 IMAGES
:= sysupgrade.bin
385 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
386 DEVICE_PACKAGES
:= ipq-wifi-devolo_magic-2-wifi-next
389 TARGET_DEVICES
+= devolo_magic-2-wifi-next
391 define Device
/dlink_dap-2610
392 $(call Device
/FitImageLzma
)
393 DEVICE_VENDOR
:= D-Link
394 DEVICE_MODEL
:= DAP-2610
396 DEVICE_DTS_CONFIG
:= config@ap.dk01.1
-c1
398 WRGG_DEVNAME
:= /dev
/mtdblock
/8
399 WRGG_SIGNATURE
:= wapac30_dkbs_dap2610
401 IMAGES
+= factory.bin
402 # Bootloader expects a special 160 byte header which is added by
404 # Factory image size must be larger than 6MB, and size in wrgg header must
405 # match actual factory image size to be flashable from D-Link http server.
406 # Bootloader verifies checksum of wrgg image before booting, thus jffs2
407 # cannot be part of the wrgg image. This is solved in the factory image by
408 # having the rootfs at the end of the image (without pad-rootfs). And in
409 # the sysupgrade image only the kernel is included in the wrgg checksum,
410 # but this is not flashable from the D-link http server.
411 # append-rootfs must start on an erase block boundary.
412 IMAGE
/factory.bin
:= append-kernel | pad-offset
6144k
160 | append-rootfs | wrgg-image | check-size
413 IMAGE
/sysupgrade.bin
:= append-kernel | wrgg-image | pad-to
$$$$(BLOCKSIZE
) | append-rootfs | pad-rootfs | check-size | append-metadata
415 TARGET_DEVICES
+= dlink_dap-2610
417 define Device
/edgecore_ecw5211
418 $(call Device
/FitImage
)
419 $(call Device
/UbiFit
)
420 DEVICE_VENDOR
:= Edgecore
421 DEVICE_MODEL
:= ECW5211
425 DEVICE_DTS_CONFIG
:= config@ap.dk01.1
-c2
426 DEVICE_PACKAGES
:= kmod-tpm-i2c-atmel kmod-usb-acm
428 TARGET_DEVICES
+= edgecore_ecw5211
430 define Device
/edgecore_oap100
431 $(call Device
/FitImage
)
432 $(call Device
/UbiFit
)
433 DEVICE_VENDOR
:= Edgecore
434 DEVICE_MODEL
:= OAP100
438 IMAGES
:= nand-sysupgrade.bin
439 DEVICE_DTS_CONFIG
:= config@ap.dk07.1
-c1
440 DEVICE_PACKAGES
:= ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
442 TARGET_DEVICES
+= edgecore_oap100
444 define Device
/engenius_eap1300
445 $(call Device
/FitImage
)
446 DEVICE_VENDOR
:= EnGenius
447 DEVICE_MODEL
:= EAP1300
448 DEVICE_DTS_CONFIG
:= config@
4
449 BOARD_NAME
:= eap1300
453 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
455 TARGET_DEVICES
+= engenius_eap1300
457 define Device
/engenius_eap2200
458 $(call Device
/FitImage
)
459 $(call Device
/UbiFit
)
460 DEVICE_VENDOR
:= EnGenius
461 DEVICE_MODEL
:= EAP2200
465 DEVICE_PACKAGES
:= ath10k-firmware-qca9888-ct
-kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
467 TARGET_DEVICES
+= engenius_eap2200
469 define Device
/engenius_emd1
470 $(call Device
/FitImage
)
471 DEVICE_VENDOR
:= EnGenius
473 DEVICE_DTS_CONFIG
:= config@
4
476 IMAGES
+= factory.bin
477 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
478 IMAGE
/factory.bin
:= qsdk-ipq-factory-nor | check-size
480 TARGET_DEVICES
+= engenius_emd1
482 define Device
/engenius_emr3500
483 $(call Device
/FitImage
)
484 DEVICE_VENDOR
:= EnGenius
485 DEVICE_MODEL
:= EMR3500
486 DEVICE_DTS_CONFIG
:= config@
4
490 IMAGES
+= factory.bin
491 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
492 IMAGE
/factory.bin
:= qsdk-ipq-factory-nor | check-size
495 TARGET_DEVICES
+= engenius_emr3500
497 define Device
/engenius_ens620ext
498 $(call Device
/FitImage
)
499 DEVICE_VENDOR
:= EnGenius
500 DEVICE_MODEL
:= ENS620EXT
502 DEVICE_DTS_CONFIG
:= config@
4
505 BOARD_NAME
:= ENS620EXT
508 PRODUCT_ID_NEW
:= 0xA4
515 FILESYSTEMS
:= squashfs
516 IMAGES
+= factory_30.bin factory_35.bin
517 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
518 IMAGE
/factory_30.bin
:= append-kernel | pad-to
$$$$(KERNEL_SIZE
) | append-rootfs | pad-rootfs | check-size | SenaoFW
$$$$(PRODUCT_ID
) $$$$(FW_VER
)
519 IMAGE
/factory_35.bin
:= qsdk-ipq-factory-nor | check-size | SenaoFW
$$$$(PRODUCT_ID_NEW
) $$$$(FW_VER_NEW
)
521 TARGET_DEVICES
+= engenius_ens620ext
523 define Device
/extreme-networks_ws-ap3915i
524 $(call Device
/FitImage
)
525 DEVICE_VENDOR
:= Extreme Networks
526 DEVICE_MODEL
:= WS-AP3915i
530 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
531 DEVICE_PACKAGES
:= ipq-wifi-extreme-networks_ws-ap3915i
533 TARGET_DEVICES
+= extreme-networks_ws-ap3915i
535 define Device
/ezviz_cs-w3-wd1200g-eup
536 $(call Device
/FitImage
)
537 DEVICE_VENDOR
:= EZVIZ
538 DEVICE_MODEL
:= CS-W3-WD1200G
539 DEVICE_VARIANT
:= EUP
543 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | \
545 DEVICE_PACKAGES
:= -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
546 DEVICE_COMPAT_VERSION
:= 2.0
547 DEVICE_COMPAT_MESSAGE
:= uboot
's bootcmd has to be updated (see wiki). \
548 Upgrade via sysupgrade mechanism is not possible.
550 TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
552 define Device/glinet_gl-ap1300
553 $(call Device/FitImage)
554 $(call Device/UbiFit)
555 DEVICE_VENDOR := GL.iNet
556 DEVICE_MODEL := GL-AP1300
558 DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
561 IMAGE_SIZE := 131072k
563 DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300 kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
565 TARGET_DEVICES += glinet_gl-ap1300
567 define Device/glinet_gl-b1300
568 $(call Device/FitzImage)
569 DEVICE_VENDOR := GL.iNet
570 DEVICE_MODEL := GL-B1300
571 BOARD_NAME := gl-b1300
575 IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
577 TARGET_DEVICES += glinet_gl-b1300
579 define Device/glinet_gl-b2200
580 $(call Device/FitzImage)
581 DEVICE_VENDOR := GL.iNet
582 DEVICE_MODEL := GL-B2200
584 DEVICE_DTS_CONFIG := config@ap.dk04.1-c3
585 KERNEL_INITRAMFS_SUFFIX := -recovery.itb
586 IMAGES := emmc.img.gz sysupgrade.bin
587 IMAGE/emmc.img.gz := qsdk-ipq-app-gpt |\
588 pad-to 1024k | append-kernel |\
589 pad-to 33792k | append-rootfs |\
590 append-metadata | gzip
591 IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
592 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct \
593 kmod-fs-ext4 kmod-mmc kmod-spi-dev mkf2fs e2fsprogs kmod-fs-f2fs
595 TARGET_DEVICES += glinet_gl-b2200
597 define Device/glinet_gl-s1300
598 $(call Device/FitzImage)
599 DEVICE_VENDOR := GL.iNet
600 DEVICE_MODEL := GL-S1300
604 IMAGES := sysupgrade.bin
605 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
606 DEVICE_PACKAGES := ipq-wifi-glinet_gl-s1300 kmod-fs-ext4 kmod-mmc kmod-spi-dev
608 TARGET_DEVICES += glinet_gl-s1300
610 define Device/linksys_ea6350v3
611 # The Linksys EA6350v3 has a uboot bootloader that does not
612 # support either booting lzma kernel images nor booting UBI
613 # partitions. This uboot, however, supports raw kernel images and
616 # As for the time of writing this, the device will boot the kernel
617 # from a fixed address with a fixed length of 3MiB. Also, the
618 # device has a hard-coded kernel command line that requieres the
619 # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
620 # Oh... and the kernel partition overlaps with the rootfs
621 # partition (the same for alt_kernel and alt_rootfs).
623 # If you are planing re-partitioning the device, you may want to
624 # keep those details in mind:
625 # 1. The kernel adresses you should honor are 0x00000000 and
626 # 0x02800000 respectively.
627 # 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
628 # 3. You can use 'zImage
', but not a raw 'Image
' packed with lzma.
629 # 4. The kernel command line from uboot is harcoded to boot with
630 # rootfs either in mtd11 or mtd13.
631 $(call Device/FitzImage)
632 DEVICE_VENDOR := Linksys
633 DEVICE_MODEL := EA6350
641 IMAGES += factory.bin
642 IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
644 TARGET_DEVICES += linksys_ea6350v3
646 define Device/linksys_ea8300
647 $(call Device/FitzImage)
648 DEVICE_VENDOR := Linksys
649 DEVICE_MODEL := EA8300
655 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
656 IMAGES += factory.bin
657 IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
658 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
660 TARGET_DEVICES += linksys_ea8300
662 define Device/linksys_mr8300
663 $(call Device/FitzImage)
664 DEVICE_VENDOR := Linksys
665 DEVICE_MODEL := MR8300
671 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
672 IMAGES += factory.bin
673 IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
674 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
676 TARGET_DEVICES += linksys_mr8300
678 define Device/linksys_whw01-v1
679 $(call Device/FitzImage)
680 DEVICE_VENDOR := Linksys
681 DEVICE_MODEL := WHW01
684 IMAGE_SIZE := 28704512 # 28032k minus linksys signature (256-bytes).
688 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
689 IMAGES += factory.bin
690 IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
691 append-ubi | linksys-image type=WHW01 | pad-to $$$$(PAGESIZE) | \
693 DEVICE_PACKAGES := uboot-envtools kmod-leds-pca963x
695 TARGET_DEVICES += linksys_whw01-v1
697 define Device/luma_wrtq-329acn
698 $(call Device/FitImage)
699 DEVICE_VENDOR := Luma Home
700 DEVICE_MODEL := WRTQ-329ACN
702 DEVICE_PACKAGES := kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio
707 TARGET_DEVICES += luma_wrtq-329acn
709 define Device/meraki_mr33
710 $(call Device/FitImage)
711 DEVICE_VENDOR := Cisco Meraki
716 DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
718 TARGET_DEVICES += meraki_mr33
720 define Device/meraki_mr74
721 $(call Device/FitImage)
722 DEVICE_VENDOR := Cisco Meraki
727 DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
728 DEVICE_DTS_CONFIG := config@3
730 TARGET_DEVICES += meraki_mr74
732 define Device/mobipromo_cm520-79f
733 $(call Device/FitzImage)
734 $(call Device/UbiFit)
735 DEVICE_VENDOR := MobiPromo
736 DEVICE_MODEL := CM520-79F
740 DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
742 TARGET_DEVICES += mobipromo_cm520-79f
744 define Device/netgear_ex61x0v2
745 $(call Device/DniImage)
746 DEVICE_VENDOR := NETGEAR
747 DEVICE_DTS_CONFIG := config@4
748 NETGEAR_BOARD_ID := EX6150v2series
749 NETGEAR_HW_ID := 29765285+16+0+128+2x2
754 define Device/netgear_ex6100v2
755 $(call Device/netgear_ex61x0v2)
756 DEVICE_MODEL := EX6100
759 TARGET_DEVICES += netgear_ex6100v2
761 define Device/netgear_ex6150v2
762 $(call Device/netgear_ex61x0v2)
763 DEVICE_MODEL := EX6150
766 TARGET_DEVICES += netgear_ex6150v2
768 define Device/netgear_orbi
769 $(call Device/DniImage)
771 DEVICE_VENDOR := NETGEAR
772 IMAGE/factory.img := append-kernel | pad-offset 128k 64 | \
773 append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | \
774 append-rootfs | pad-rootfs | netgear-dni
775 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | \
776 sysupgrade-tar rootfs=$$$$@ | append-metadata
777 DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
780 define Device/netgear_rbx50
781 $(call Device/netgear_orbi)
782 NETGEAR_HW_ID := 29765352+0+4000+512+2x2+2x2+4x4
783 KERNEL_SIZE := 3932160
784 ROOTFS_SIZE := 32243712
785 IMAGE_SIZE := 36175872
788 define Device/netgear_rbr50
789 $(call Device/netgear_rbx50)
790 DEVICE_MODEL := RBR50
792 NETGEAR_BOARD_ID := RBR50
794 TARGET_DEVICES += netgear_rbr50
796 define Device/netgear_rbs50
797 $(call Device/netgear_rbx50)
798 DEVICE_MODEL := RBS50
800 NETGEAR_BOARD_ID := RBS50
802 TARGET_DEVICES += netgear_rbs50
804 define Device/netgear_srx60
805 $(call Device/netgear_orbi)
806 NETGEAR_HW_ID := 29765352+0+4096+512+2x2+2x2+4x4
807 KERNEL_SIZE := 3932160
808 ROOTFS_SIZE := 32243712
809 IMAGE_SIZE := 36175872
812 define Device/netgear_srr60
813 $(call Device/netgear_srx60)
814 DEVICE_MODEL := SRR60
815 NETGEAR_BOARD_ID := SRR60
817 TARGET_DEVICES += netgear_srr60
819 define Device/netgear_srs60
820 $(call Device/netgear_srx60)
821 DEVICE_MODEL := SRS60
822 NETGEAR_BOARD_ID := SRS60
824 TARGET_DEVICES += netgear_srs60
826 define Device/netgear_wac510
827 $(call Device/FitImage)
828 $(call Device/UbiFit)
829 DEVICE_VENDOR := Netgear
830 DEVICE_MODEL := WAC510
832 DEVICE_DTS_CONFIG := config@5
835 IMAGES += nand-factory.tar
836 IMAGE/nand-factory.tar := append-ubi | wac5xx-netgear-tar
837 DEVICE_PACKAGES := uboot-envtools
839 TARGET_DEVICES += netgear_wac510
841 define Device/openmesh_a42
842 $(call Device/FitImageLzma)
843 DEVICE_VENDOR := OpenMesh
846 DEVICE_DTS_CONFIG := config@om.a42
848 KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
850 IMAGES += factory.bin
851 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
852 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
854 TARGET_DEVICES += openmesh_a42
856 define Device/openmesh_a62
857 $(call Device/FitImageLzma)
858 DEVICE_VENDOR := OpenMesh
861 DEVICE_DTS_CONFIG := config@om.a62
863 KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
865 IMAGES += factory.bin
866 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
867 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
868 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
870 TARGET_DEVICES += openmesh_a62
872 define Device/p2w_r619ac
873 $(call Device/FitzImage)
874 $(call Device/UbiFit)
876 DEVICE_MODEL := R619AC
878 DEVICE_DTS_CONFIG := config@10
881 DEVICE_PACKAGES := ipq-wifi-p2w_r619ac
884 define Device/p2w_r619ac-64m
885 $(call Device/p2w_r619ac)
886 DEVICE_VARIANT := 64M NAND
887 IMAGES += nand-factory.bin
888 IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
890 TARGET_DEVICES += p2w_r619ac-64m
892 define Device/p2w_r619ac-128m
893 $(call Device/p2w_r619ac)
894 DEVICE_VARIANT := 128M NAND
896 TARGET_DEVICES += p2w_r619ac-128m
898 define Device/pakedge_wr-1
899 $(call Device/FitImageLzma)
900 DEVICE_VENDOR := Pakedge
902 DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
903 DEVICE_PACKAGES := ipq-wifi-pakedge_wr-1
907 IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | append-metadata
909 TARGET_DEVICES += pakedge_wr-1
911 define Device/plasmacloud_pa1200
912 $(call Device/FitImageLzma)
913 DEVICE_VENDOR := Plasma Cloud
914 DEVICE_MODEL := PA1200
916 DEVICE_DTS_CONFIG := config@pc.pa1200
918 KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
920 IMAGES += factory.bin
921 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
922 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
924 TARGET_DEVICES += plasmacloud_pa1200
926 define Device/plasmacloud_pa2200
927 $(call Device/FitImageLzma)
928 DEVICE_VENDOR := Plasma Cloud
929 DEVICE_MODEL := PA2200
931 DEVICE_DTS_CONFIG := config@pc.pa2200
933 KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
935 IMAGES += factory.bin
936 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
937 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
938 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
940 TARGET_DEVICES += plasmacloud_pa2200
942 define Device/qcom_ap-dk01.1-c1
943 DEVICE_VENDOR := Qualcomm Atheros
944 DEVICE_MODEL := AP-DK01.1
946 BOARD_NAME := ap-dk01.1-c1
948 DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
952 $(call Device/FitImage)
953 IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
956 TARGET_DEVICES += qcom_ap-dk01.1-c1
958 define Device/qcom_ap-dk04.1-c1
959 $(call Device/FitImage)
960 $(call Device/UbiFit)
961 DEVICE_VENDOR := Qualcomm Atheros
962 DEVICE_MODEL := AP-DK04.1
965 DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
970 BOARD_NAME := ap-dk04.1-c1
973 TARGET_DEVICES += qcom_ap-dk04.1-c1
975 define Device/qxwlan_e2600ac-c1
976 $(call Device/FitImage)
977 DEVICE_VENDOR := Qxwlan
978 DEVICE_MODEL := E2600AC
980 BOARD_NAME := e2600ac-c1
984 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
985 DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c1
988 TARGET_DEVICES += qxwlan_e2600ac-c1
990 define Device/qxwlan_e2600ac-c2
991 $(call Device/FitImage)
992 $(call Device/UbiFit)
993 DEVICE_VENDOR := Qxwlan
994 DEVICE_MODEL := E2600AC
1000 DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c2
1002 TARGET_DEVICES += qxwlan_e2600ac-c2
1004 define Device/teltonika_rutx10
1005 $(call Device/FitImage)
1006 $(call Device/UbiFit)
1007 DEVICE_VENDOR := Teltonika
1008 DEVICE_MODEL := RUTX10
1010 DEVICE_DTS_CONFIG := config@5
1014 FILESYSTEMS := squashfs
1015 IMAGE/nand-factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
1016 DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-bluetooth
1018 TARGET_DEVICES += teltonika_rutx10
1020 define Device/tel_x1pro
1021 $(call Device/FitImage)
1022 DEVICE_VENDOR := Telco
1023 DEVICE_MODEL := X1 Pro
1025 KERNEL_SIZE := 4096k
1026 IMAGE_SIZE := 31232k
1027 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1028 DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1031 TARGET_DEVICES += tel_x1pro
1033 define Device/unielec_u4019-32m
1034 $(call Device/FitImage)
1035 DEVICE_VENDOR := Unielec
1036 DEVICE_MODEL := U4019
1037 DEVICE_VARIANT := 32M
1038 BOARD_NAME := u4019-32m
1040 KERNEL_SIZE := 4096k
1041 IMAGE_SIZE := 31232k
1042 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1045 TARGET_DEVICES += unielec_u4019-32m
1047 define Device/zte_mf286d
1048 $(call Device/FitzImage)
1049 DEVICE_VENDOR := ZTE
1050 DEVICE_MODEL := MF286D
1052 DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
1056 DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1058 TARGET_DEVICES += zte_mf286d
1060 define Device/zyxel_nbg6617
1061 $(call Device/FitImageLzma)
1062 DEVICE_VENDOR := ZyXEL
1063 DEVICE_MODEL := NBG6617
1065 KERNEL_SIZE := 4096k
1066 ROOTFS_SIZE := 24960k
1067 RAS_BOARD := NBG6617
1068 RAS_ROOTFS_SIZE := 19840k
1069 RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
1070 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1071 IMAGES += factory.bin
1072 # The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
1073 # at least as large as the one of the initial firmware image (not the current
1074 # one on the device). This only applies to the Web-UI, the bootlaoder ignores
1075 # this minimum-size. However, the larger image can be flashed both ways.
1076 IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
1077 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
1078 DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
1080 TARGET_DEVICES += zyxel_nbg6617
1082 define Device/zyxel_wre6606
1083 $(call Device/FitImage)
1084 DEVICE_VENDOR := ZyXEL
1085 DEVICE_MODEL := WRE6606
1086 DEVICE_DTS_CONFIG := config@4
1088 IMAGE_SIZE := 13184k
1089 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
1090 DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
1092 TARGET_DEVICES += zyxel_wre6606