2 DEVICE_VARS
+= NETGEAR_BOARD_ID NETGEAR_HW_ID
3 DEVICE_VARS
+= RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
4 DEVICE_VARS
+= WRGG_DEVNAME WRGG_SIGNATURE
7 KERNEL_SUFFIX
:= -uImage.itb
8 KERNEL
= kernel-bin | gzip | fit gzip
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb
12 define Device
/FitImageLzma
13 KERNEL_SUFFIX
:= -uImage.itb
14 KERNEL
= kernel-bin | lzma | fit lzma
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb
18 define Device
/FitzImage
19 KERNEL_SUFFIX
:= -zImage.itb
20 KERNEL
= kernel-bin | fit none
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb
26 IMAGES
:= factory.ubi sysupgrade.bin
27 IMAGE
/factory.ubi
:= append-ubi
28 IMAGE
/sysupgrade.bin
:= sysupgrade-tar | append-metadata
31 define Device
/DniImage
32 $(call Device
/FitzImage
)
36 IMAGE
/factory.img
:= append-kernel | pad-offset
64k
64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
37 IMAGE
/sysupgrade.bin
:= append-kernel | pad-offset
64k
64 | append-uImage-fakehdr filesystem | \
38 append-rootfs | pad-rootfs | check-size | append-metadata
41 define Build
/append-rootfshdr
42 mkimage
-A
$(LINUX_KARCH
) \
43 -O linux
-T filesystem \
44 -C lzma
-a
$(KERNEL_LOADADDR
) -e
$(if
$(KERNEL_ENTRY
),$(KERNEL_ENTRY
),$(KERNEL_LOADADDR
)) \
45 -n root.squashfs
-d
$(IMAGE_ROOTFS
) $@.new
46 cat
$(IMAGE_KERNEL
) > $@.
$1
47 dd if
=$@.new bs
=64 count
=1 >> $@.
$1
50 define Build
/append-rutx-metadata
53 "device_code": [".*"], \
57 "supported_devices":["teltonika,rutx"] \
61 define Build
/copy-file
65 define Build
/mkmylofw_32m
66 $(eval device_id
=$(word 1,$(1)))
67 $(eval revision
=$(word 2,$(1)))
70 size
="$$(stat -c%s $@)" \
71 pad
="$(subst k,* 1024,$(BLOCKSIZE))" \
72 pad
="(pad - (size % pad)) % pad" \
73 newsize
='size + pad'; \
74 $(STAGING_DIR_HOST
)/bin
/mkmylofw \
75 -B WPE72
-i
0x11f6:$(device_id
):0x11f6:$(device_id
) -r
$(revision
) \
76 -s
0x2000000 -p0x180000
:$$newsize:al
:0x80208000:"OpenWrt":$@ \
81 define Build
/wac5xx-netgear-tar
83 mv
$@
$@.tmp
/wac5xx-ubifs-root.img
84 md5sum
$@.tmp
/wac5xx-ubifs-root.img
> $@.tmp
/wac5xx-ubifs-root.md5sum
85 echo
"WAC505 WAC510" > $@.tmp
/metadata.txt
86 echo
"WAC505_V9.9.9.9" > $@.tmp
/version
87 tar -C
$@.tmp
/ -cf
$@ .
91 define Build
/qsdk-ipq-factory-nand-askey
92 $(TOPDIR
)/scripts
/mkits-qsdk-ipq-image.sh
$@.its\
94 askey_fs
$(IMAGE_ROOTFS
) \
96 PATH
=$(LINUX_DIR
)/scripts
/dtc
:$(PATH
) mkimage
-f
$@.its
$@.new
100 define Build
/qsdk-ipq-app-gpt
101 cp
$@
$@.tmp
2>/dev
/null || true
102 ptgen
-g
-o
$@.tmp
-a
1 -l
1024 \
103 -t
0x2e -N
0:HLOS
-r
-p
32M \
104 -t
0x83 -N rootfs
-r
-p
128M \
105 -N rootfs_data
-p
512M
111 -$(STAGING_DIR_HOST
)/bin
/mksenaofw \
112 -n
$(BOARD_NAME
) -r
$(VENDOR_ID
) -p
$(1) \
113 -c
$(DATECODE
) -w
$(2) -x
$(CW_VER
) -t
0 \
119 define Build
/wrgg-image
122 -d
"$(WRGG_DEVNAME)" \
123 -s
"$(WRGG_SIGNATURE)" \
128 define Device
/8dev_habanero-dvk
129 $(call Device
/FitImageLzma
)
130 DEVICE_VENDOR
:= 8devices
131 DEVICE_MODEL
:= Habanero DVK
134 IMAGE
/sysupgrade.bin
:= append-kernel | pad-to
64k | append-rootfs | pad-rootfs | check-size | append-metadata
135 DEVICE_PACKAGES
:= ipq-wifi-8dev_habanero
137 TARGET_DEVICES
+= 8dev_habanero-dvk
139 define Device
/8dev_jalapeno-common
140 $(call Device
/FitImage
)
141 $(call Device
/UbiFit
)
145 DEVICE_PACKAGES
:= ipq-wifi-8dev_jalapeno
148 define Device
/8dev_jalapeno
149 $(call Device
/8dev_jalapeno-common
)
150 DEVICE_VENDOR
:= 8devices
151 DEVICE_MODEL
:= Jalapeno
153 TARGET_DEVICES
+= 8dev_jalapeno
155 define Device
/alfa-network_ap120c-ac
156 $(call Device
/FitImage
)
157 $(call Device
/UbiFit
)
158 DEVICE_VENDOR
:= ALFA Network
159 DEVICE_MODEL
:= AP120C-AC
161 DEVICE_PACKAGES
:= kmod-usb-acm kmod-tpm-i2c-atmel
165 IMAGES
:= factory.bin sysupgrade.bin
166 IMAGE
/factory.bin
:= append-ubi | qsdk-ipq-factory-nand
168 TARGET_DEVICES
+= alfa-network_ap120c-ac
170 define Device
/aruba_glenmorangie
171 $(call Device
/FitImageLzma
)
172 DEVICE_VENDOR
:= Aruba
176 define Device
/aruba_ap-303
177 $(call Device
/aruba_glenmorangie
)
178 DEVICE_MODEL
:= AP-303
180 TARGET_DEVICES
+= aruba_ap-303
182 define Device
/aruba_ap-303h
183 $(call Device
/aruba_glenmorangie
)
184 DEVICE_MODEL
:= AP-303H
186 TARGET_DEVICES
+= aruba_ap-303h
188 define Device
/aruba_ap-365
189 $(call Device
/aruba_glenmorangie
)
190 DEVICE_MODEL
:= AP-365
191 DEVICE_PACKAGES
:= kmod-hwmon-ad7418 ipq-wifi-aruba_ap-365
193 TARGET_DEVICES
+= aruba_ap-365
195 define Device
/asus_map-ac2200
196 $(call Device
/FitImageLzma
)
197 DEVICE_VENDOR
:= ASUS
198 DEVICE_MODEL
:= Lyra
(MAP-AC2200
)
200 DEVICE_PACKAGES
:= ath10k-firmware-qca9888-ct kmod-ath3k
202 TARGET_DEVICES
+= asus_map-ac2200
204 # WARNING: this is an initramfs image that gets you half of the way there
205 # you need to delete the jffs2 ubi volume and sysupgrade to the final image
206 # to get a "trx" you can flash via web UI for ac42u/ac58u:
207 # - change call Device/FitImageLzma to Device/FitImage
208 # - add the following below UIMAGE_NAME
209 # UIMAGE_MAGIC := 0x27051956
210 # IMAGES += factory.trx
211 # IMAGE/factory.trx := copy-file $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE) | uImage none
212 define Device
/asus_rt-ac42u
213 $(call Device
/FitImageLzma
)
214 DEVICE_VENDOR
:= ASUS
215 DEVICE_MODEL
:= RT-AC42U
216 DEVICE_ALT0_VENDOR
:= ASUS
217 DEVICE_ALT0_MODEL
:= RT-ACRH17
218 DEVICE_ALT1_VENDOR
:= ASUS
219 DEVICE_ALT1_MODEL
:= RT-AC2200
223 IMAGE_SIZE
:= 20439364
224 FILESYSTEMS
:= squashfs
225 # RT-AC82U is nowhere to be found online
226 # Rather, this device is a/k/a RT-AC42U
227 # But we'll go with what the vendor firmware has...
228 UIMAGE_NAME
:=$(shell echo
-e
'\03\01\01\01RT-AC82U')
229 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct kmod-usb-ledtrig-usbport
231 TARGET_DEVICES
+= asus_rt-ac42u
233 define Device
/asus_rt-ac58u
234 $(call Device
/FitImageLzma
)
235 DEVICE_VENDOR
:= ASUS
236 DEVICE_MODEL
:= RT-AC58U
237 DEVICE_ALT0_VENDOR
:= ASUS
238 DEVICE_ALT0_MODEL
:= RT-ACRH13
242 IMAGE_SIZE
:= 20439364
243 FILESYSTEMS
:= squashfs
244 # Someone - in their infinite wisdom - decided to put the firmware
245 # version in front of the image name \03\00\00\04 => Version 3.0.0.4
246 # Since u-boot works with strings we either need another fixup step
247 # to add a version... or we are very careful not to add '\0' into that
248 # string and call it a day.... Yeah, we do the latter!
249 UIMAGE_NAME
:=$(shell echo
-e
'\03\01\01\01RT-AC58U')
250 DEVICE_PACKAGES
:= -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
251 kmod-usb-ledtrig-usbport
253 TARGET_DEVICES
+= asus_rt-ac58u
255 define Device
/avm_fritzbox-4040
256 $(call Device
/FitImageLzma
)
258 DEVICE_MODEL
:= FRITZ
!Box
4040
260 BOARD_NAME
:= fritz4040
262 UBOOT_PATH
:= $(STAGING_DIR_IMAGE
)/uboot-fritz4040.bin
263 UBOOT_PARTITION_SIZE
:= 524288
265 IMAGE
/eva.bin
:= append-uboot | pad-to
$$$$(UBOOT_PARTITION_SIZE
) | append-kernel | append-rootfs | pad-rootfs
266 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
267 DEVICE_PACKAGES
:= fritz-tffs fritz-caldata
269 TARGET_DEVICES
+= avm_fritzbox-4040
271 define Device
/avm_fritzbox-7530
272 $(call Device
/FitImageLzma
)
274 DEVICE_MODEL
:= FRITZ
!Box
7530
275 DEVICE_ALT0_VENDOR
:= AVM
276 DEVICE_ALT0_MODEL
:= FRITZ
!Box
7520
278 DEVICE_PACKAGES
:= fritz-caldata fritz-tffs-nand ltq-vdsl-vr11-app
280 TARGET_DEVICES
+= avm_fritzbox-7530
282 define Device
/avm_fritzrepeater-1200
283 $(call Device
/FitImageLzma
)
285 DEVICE_MODEL
:= FRITZ
!Repeater
1200
287 DEVICE_PACKAGES
:= fritz-caldata fritz-tffs-nand
289 TARGET_DEVICES
+= avm_fritzrepeater-1200
291 define Device
/avm_fritzrepeater-3000
292 $(call Device
/FitImageLzma
)
294 DEVICE_MODEL
:= FRITZ
!Repeater
3000
296 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
299 #TARGET_DEVICES += avm_fritzrepeater-3000
301 define Device
/buffalo_wtr-m2133hp
302 $(call Device
/FitImage
)
303 $(call Device
/UbiFit
)
304 DEVICE_VENDOR
:= Buffalo
305 DEVICE_MODEL
:= WTR-M2133HP
307 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct
312 #TARGET_DEVICES += buffalo_wtr-m2133hp
314 define Device
/cellc_rtl30vw
315 KERNEL_SUFFIX
:= -zImage.itb
316 KERNEL_INITRAMFS
= kernel-bin | gzip | fit gzip
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb
317 KERNEL
= kernel-bin | fit none
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb | uImage lzma | pad-to
2048
318 KERNEL_NAME
:= zImage
320 IMAGES
:= factory.bin sysupgrade.bin
321 IMAGE
/factory.bin
:= append-rootfshdr kernel | append-ubi | qsdk-ipq-factory-nand-askey kernel
322 IMAGE
/sysupgrade.bin
:= append-rootfshdr kernel | sysupgrade-tar kernel
=$$$$@.kernel | append-metadata
323 DEVICE_VENDOR
:= Cell C
324 DEVICE_MODEL
:= RTL30VW
326 DEVICE_DTS_CONFIG
:= config@
5
332 DEVICE_PACKAGES
:= kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
334 TARGET_DEVICES
+= cellc_rtl30vw
336 define Device
/cilab_meshpoint-one
337 $(call Device
/8dev_jalapeno-common
)
338 DEVICE_VENDOR
:= Crisis Innovation Lab
339 DEVICE_MODEL
:= MeshPoint.One
340 DEVICE_PACKAGES
+= kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
343 #TARGET_DEVICES += cilab_meshpoint-one
345 define Device
/compex_wpj419
346 $(call Device
/FitImage
)
347 $(call Device
/UbiFit
)
348 DEVICE_VENDOR
:= Compex
349 DEVICE_MODEL
:= WPJ419
351 DEVICE_DTS_CONFIG
:= config@
12
355 FILESYSTEMS
:= squashfs
358 #TARGET_DEVICES += compex_wpj419
360 define Device
/compex_wpj428
361 $(call Device
/FitImage
)
362 DEVICE_VENDOR
:= Compex
363 DEVICE_MODEL
:= WPJ428
365 DEVICE_DTS_CONFIG
:= config@
4
369 IMAGES
+= cpximg-6a04.bin
370 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
371 IMAGE
/cpximg-6a04.bin
:= append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m
0x8A2 3
372 DEVICE_PACKAGES
:= kmod-gpio-beeper
375 TARGET_DEVICES
+= compex_wpj428
377 define Device
/devolo_magic-2-wifi-next
378 $(call Device
/FitImage
)
379 DEVICE_VENDOR
:= devolo
380 DEVICE_MODEL
:= Magic
2 WiFi next
384 # If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
385 # it will bootm it, just like we want for the initramfs.
386 KERNEL_INITRAMFS
:= kernel-bin | gzip | fit gzip
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb | pad-to
64k |\
387 append-string
-e
'\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
390 IMAGES
:= sysupgrade.bin
391 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
392 DEVICE_PACKAGES
:= ipq-wifi-devolo_magic-2-wifi-next
396 #TARGET_DEVICES += devolo_magic-2-wifi-next
398 define Device
/dlink_dap-2610
399 $(call Device
/FitImageLzma
)
400 DEVICE_VENDOR
:= D-Link
401 DEVICE_MODEL
:= DAP-2610
403 DEVICE_DTS_CONFIG
:= config@ap.dk01.1
-c1
405 WRGG_DEVNAME
:= /dev
/mtdblock
/8
406 WRGG_SIGNATURE
:= wapac30_dkbs_dap2610
408 IMAGES
+= factory.bin
409 # Bootloader expects a special 160 byte header which is added by
411 # Factory image size must be larger than 6MB, and size in wrgg header must
412 # match actual factory image size to be flashable from D-Link http server.
413 # Bootloader verifies checksum of wrgg image before booting, thus jffs2
414 # cannot be part of the wrgg image. This is solved in the factory image by
415 # having the rootfs at the end of the image (without pad-rootfs). And in
416 # the sysupgrade image only the kernel is included in the wrgg checksum,
417 # but this is not flashable from the D-link http server.
418 # append-rootfs must start on an erase block boundary.
419 IMAGE
/factory.bin
:= append-kernel | pad-offset
6144k
160 | append-rootfs | wrgg-image | check-size
420 IMAGE
/sysupgrade.bin
:= append-kernel | wrgg-image | pad-to
$$$$(BLOCKSIZE
) | append-rootfs | pad-rootfs | check-size | append-metadata
422 TARGET_DEVICES
+= dlink_dap-2610
424 define Device
/edgecore_ecw5211
425 $(call Device
/FitImage
)
426 $(call Device
/UbiFit
)
427 DEVICE_VENDOR
:= Edgecore
428 DEVICE_MODEL
:= ECW5211
432 DEVICE_DTS_CONFIG
:= config@ap.dk01.1
-c2
433 DEVICE_PACKAGES
:= kmod-tpm-i2c-atmel kmod-usb-acm
435 TARGET_DEVICES
+= edgecore_ecw5211
437 define Device
/edgecore_oap100
438 $(call Device
/FitImage
)
439 $(call Device
/UbiFit
)
440 DEVICE_VENDOR
:= Edgecore
441 DEVICE_MODEL
:= OAP100
445 IMAGES
:= sysupgrade.bin
446 DEVICE_DTS_CONFIG
:= config@ap.dk07.1
-c1
447 DEVICE_PACKAGES
:= ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
450 #TARGET_DEVICES += edgecore_oap100
452 define Device
/engenius_eap1300
453 $(call Device
/FitImage
)
454 DEVICE_VENDOR
:= EnGenius
455 DEVICE_MODEL
:= EAP1300
456 DEVICE_DTS_CONFIG
:= config@
4
457 BOARD_NAME
:= eap1300
461 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
464 #TARGET_DEVICES += engenius_eap1300
466 define Device
/engenius_eap2200
467 $(call Device
/FitImage
)
468 $(call Device
/UbiFit
)
469 DEVICE_VENDOR
:= EnGenius
470 DEVICE_MODEL
:= EAP2200
474 DEVICE_PACKAGES
:= ath10k-firmware-qca9888-ct
-kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
477 #TARGET_DEVICES += engenius_eap2200
479 define Device
/engenius_emd1
480 $(call Device
/FitImage
)
481 DEVICE_VENDOR
:= EnGenius
483 DEVICE_DTS_CONFIG
:= config@
4
486 IMAGES
+= factory.bin
487 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
488 IMAGE
/factory.bin
:= qsdk-ipq-factory-nor | check-size
491 #TARGET_DEVICES += engenius_emd1
493 define Device
/engenius_emr3500
494 $(call Device
/FitImage
)
495 DEVICE_VENDOR
:= EnGenius
496 DEVICE_MODEL
:= EMR3500
497 DEVICE_DTS_CONFIG
:= config@
4
501 IMAGES
+= factory.bin
502 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
503 IMAGE
/factory.bin
:= qsdk-ipq-factory-nor | check-size
507 #TARGET_DEVICES += engenius_emr3500
509 define Device
/engenius_ens620ext
510 $(call Device
/FitImage
)
511 DEVICE_VENDOR
:= EnGenius
512 DEVICE_MODEL
:= ENS620EXT
514 DEVICE_DTS_CONFIG
:= config@
4
517 BOARD_NAME
:= ENS620EXT
520 PRODUCT_ID_NEW
:= 0xA4
527 FILESYSTEMS
:= squashfs
528 IMAGES
+= factory_30.bin factory_35.bin
529 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
530 IMAGE
/factory_30.bin
:= append-kernel | pad-to
$$$$(KERNEL_SIZE
) | append-rootfs | pad-rootfs | check-size | SenaoFW
$$$$(PRODUCT_ID
) $$$$(FW_VER
)
531 IMAGE
/factory_35.bin
:= qsdk-ipq-factory-nor | check-size | SenaoFW
$$$$(PRODUCT_ID_NEW
) $$$$(FW_VER_NEW
)
534 #TARGET_DEVICES += engenius_ens620ext
536 define Device
/extreme-networks_ws-ap3915i
537 $(call Device
/FitImage
)
538 DEVICE_VENDOR
:= Extreme Networks
539 DEVICE_MODEL
:= WS-AP3915i
543 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
544 DEVICE_PACKAGES
:= ipq-wifi-extreme-networks_ws-ap3915i
546 TARGET_DEVICES
+= extreme-networks_ws-ap3915i
548 define Device
/ezviz_cs-w3-wd1200g-eup
549 $(call Device
/FitImage
)
550 DEVICE_VENDOR
:= EZVIZ
551 DEVICE_MODEL
:= CS-W3-WD1200G
552 DEVICE_VARIANT
:= EUP
556 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | \
558 DEVICE_PACKAGES
:= -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
559 DEVICE_COMPAT_VERSION
:= 2.0
560 DEVICE_COMPAT_MESSAGE
:= uboot
's bootcmd has to be updated (see wiki). \
561 Upgrade via sysupgrade mechanism is not possible.
564 #TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
566 define Device/glinet_gl-a1300
567 $(call Device/FitImage)
568 $(call Device/UbiFit)
569 DEVICE_VENDOR := GL.iNet
570 DEVICE_MODEL := GL-A1300
572 DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
575 IMAGE_SIZE := 131072k
576 DEVICE_PACKAGE := ipq-wifi-glinet_gl-a1300
578 TARGET_DEVICES += glinet_gl-a1300
580 define Device/glinet_gl-ap1300
581 $(call Device/FitImage)
582 $(call Device/UbiFit)
583 DEVICE_VENDOR := GL.iNet
584 DEVICE_MODEL := GL-AP1300
586 DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
589 IMAGE_SIZE := 131072k
591 DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300 kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
594 #TARGET_DEVICES += glinet_gl-ap1300
596 define Device/glinet_gl-b1300
597 $(call Device/FitzImage)
598 DEVICE_VENDOR := GL.iNet
599 DEVICE_MODEL := GL-B1300
600 BOARD_NAME := gl-b1300
604 IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
606 TARGET_DEVICES += glinet_gl-b1300
608 define Device/glinet_gl-b2200
609 $(call Device/FitzImage)
610 DEVICE_VENDOR := GL.iNet
611 DEVICE_MODEL := GL-B2200
613 DEVICE_DTS_CONFIG := config@ap.dk04.1-c3
614 KERNEL_INITRAMFS_SUFFIX := -recovery.itb
615 IMAGES := emmc.img.gz sysupgrade.bin
616 IMAGE/emmc.img.gz := qsdk-ipq-app-gpt |\
617 pad-to 1024k | append-kernel |\
618 pad-to 33792k | append-rootfs |\
619 append-metadata | gzip
620 IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
621 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct \
622 kmod-fs-ext4 kmod-mmc kmod-spi-dev mkf2fs e2fsprogs kmod-fs-f2fs
624 TARGET_DEVICES += glinet_gl-b2200
626 define Device/glinet_gl-s1300
627 $(call Device/FitzImage)
628 DEVICE_VENDOR := GL.iNet
629 DEVICE_MODEL := GL-S1300
633 IMAGES := sysupgrade.bin
634 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
635 DEVICE_PACKAGES := ipq-wifi-glinet_gl-s1300 kmod-fs-ext4 kmod-mmc kmod-spi-dev
638 #TARGET_DEVICES += glinet_gl-s1300
640 define Device/kernel-size-6350-8300
641 DEVICE_COMPAT_VERSION := 2.0
642 DEVICE_COMPAT_MESSAGE := Kernel partition size must be increased for \
643 this OpenWrt version. Before continuing, you MUST issue either the \
644 command "fw_setenv kernsize 500000" from the OpenWrt command line, \
645 or "setenv kernsize 500000 ; saveenv" from the U-Boot serial console. \
646 Instead of the sysupgrade image, you must then install the OpenWrt \
647 factory image, setting the force flag and wiping the configuration. \
648 (e.g. "sysupgrade -n -F openwrt-squashfs-factory.bin" on command line)
651 define Device/linksys_ea6350v3
652 # The Linksys EA6350v3 has a uboot bootloader that does not
653 # support either booting lzma kernel images nor booting UBI
654 # partitions. This uboot, however, supports raw kernel images and
657 # As configured by the OEM factory, the device will boot the kernel
658 # from a fixed address with a fixed length of 3 MiB. Also, the
659 # device has a hard-coded kernel command line that requires the
660 # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
661 # Oh... and the kernel partition overlaps with the rootfs
662 # partition (the same for alt_kernel and alt_rootfs).
664 # If you are planing re-partitioning the device, you may want to
665 # keep these details in mind:
666 # 1. The kernel addresses you should honor are 0x00000000 and
667 # 0x02800000 respectively.
668 # 2. The kernel size (plus the dtb) cannot exceed 3 MiB in size
669 # unless the uboot environment variable "kernsize" is increased.
670 # 3. You can use 'zImage
', but not a raw 'Image
' packed with lzma.
671 # 4. The kernel command line from uboot is harcoded to boot with
672 # rootfs either in mtd11 or mtd13.
673 $(call Device/FitzImage)
674 $(call Device/kernel-size-6350-8300)
675 DEVICE_VENDOR := Linksys
676 DEVICE_MODEL := EA6350
684 IMAGES += factory.bin
685 IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
687 TARGET_DEVICES += linksys_ea6350v3
689 define Device/linksys_ea8300
690 $(call Device/FitzImage)
691 $(call Device/kernel-size-6350-8300)
692 DEVICE_VENDOR := Linksys
693 DEVICE_MODEL := EA8300
699 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
700 IMAGES += factory.bin
701 IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
702 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
704 TARGET_DEVICES += linksys_ea8300
706 define Device/linksys_mr8300
707 $(call Device/FitzImage)
708 $(call Device/kernel-size-6350-8300)
709 DEVICE_VENDOR := Linksys
710 DEVICE_MODEL := MR8300
716 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
717 IMAGES += factory.bin
718 IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
719 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
721 TARGET_DEVICES += linksys_mr8300
723 define Device/linksys_whw03v2
724 $(call Device/FitzImage)
725 DEVICE_VENDOR := Linksys
726 DEVICE_MODEL := WHW03
730 IMAGE_SIZE := 158720k
733 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
734 IMAGES += factory.bin
735 IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW03v2
736 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_whw03v2 kmod-leds-pca963x kmod-spi-dev kmod-bluetooth
738 TARGET_DEVICES += linksys_whw03v2
740 define Device/linksys_whw01
741 $(call Device/FitzImage)
742 DEVICE_VENDOR := Linksys
743 DEVICE_MODEL := WHW01
749 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
750 IMAGES += factory.bin
751 IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW01
752 DEVICE_PACKAGES := uboot-envtools kmod-leds-pca963x
754 TARGET_DEVICES += linksys_whw01
756 define Device/luma_wrtq-329acn
757 $(call Device/FitImage)
758 DEVICE_VENDOR := Luma Home
759 DEVICE_MODEL := WRTQ-329ACN
761 DEVICE_PACKAGES := kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio
766 TARGET_DEVICES += luma_wrtq-329acn
768 define Device/meraki_mr33
769 $(call Device/FitImage)
770 DEVICE_VENDOR := Cisco Meraki
775 DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
777 TARGET_DEVICES += meraki_mr33
779 define Device/meraki_mr74
780 $(call Device/FitImage)
781 DEVICE_VENDOR := Cisco Meraki
786 DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
787 DEVICE_DTS_CONFIG := config@3
789 TARGET_DEVICES += meraki_mr74
791 define Device/mobipromo_cm520-79f
792 $(call Device/FitzImage)
793 $(call Device/UbiFit)
794 DEVICE_VENDOR := MobiPromo
795 DEVICE_MODEL := CM520-79F
799 DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
801 TARGET_DEVICES += mobipromo_cm520-79f
803 define Device/netgear_ex61x0v2
804 $(call Device/DniImage)
805 DEVICE_VENDOR := NETGEAR
806 DEVICE_DTS_CONFIG := config@4
807 NETGEAR_BOARD_ID := EX6150v2series
808 NETGEAR_HW_ID := 29765285+16+0+128+2x2
813 define Device/netgear_ex6100v2
814 $(call Device/netgear_ex61x0v2)
815 DEVICE_MODEL := EX6100
818 TARGET_DEVICES += netgear_ex6100v2
820 define Device/netgear_ex6150v2
821 $(call Device/netgear_ex61x0v2)
822 DEVICE_MODEL := EX6150
825 TARGET_DEVICES += netgear_ex6150v2
827 define Device/netgear_orbi
828 $(call Device/DniImage)
830 DEVICE_VENDOR := NETGEAR
831 IMAGE/factory.img := append-kernel | pad-offset 128k 64 | \
832 append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | \
833 append-rootfs | pad-rootfs | netgear-dni
834 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | \
835 sysupgrade-tar rootfs=$$$$@ | append-metadata
836 DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
839 define Device/netgear_rbx50
840 $(call Device/netgear_orbi)
841 NETGEAR_HW_ID := 29765352+0+4000+512+2x2+2x2+4x4
842 KERNEL_SIZE := 3932160
843 ROOTFS_SIZE := 32243712
844 IMAGE_SIZE := 36175872
847 define Device/netgear_rbr50
848 $(call Device/netgear_rbx50)
849 DEVICE_MODEL := RBR50
851 NETGEAR_BOARD_ID := RBR50
853 TARGET_DEVICES += netgear_rbr50
855 define Device/netgear_rbs50
856 $(call Device/netgear_rbx50)
857 DEVICE_MODEL := RBS50
859 NETGEAR_BOARD_ID := RBS50
861 TARGET_DEVICES += netgear_rbs50
863 define Device/netgear_srx60
864 $(call Device/netgear_orbi)
865 NETGEAR_HW_ID := 29765352+0+4096+512+2x2+2x2+4x4
866 KERNEL_SIZE := 3932160
867 ROOTFS_SIZE := 32243712
868 IMAGE_SIZE := 36175872
871 define Device/netgear_srr60
872 $(call Device/netgear_srx60)
873 DEVICE_MODEL := SRR60
874 NETGEAR_BOARD_ID := SRR60
876 TARGET_DEVICES += netgear_srr60
878 define Device/netgear_srs60
879 $(call Device/netgear_srx60)
880 DEVICE_MODEL := SRS60
881 NETGEAR_BOARD_ID := SRS60
883 TARGET_DEVICES += netgear_srs60
885 define Device/netgear_wac510
886 $(call Device/FitImage)
887 $(call Device/UbiFit)
888 DEVICE_VENDOR := Netgear
889 DEVICE_MODEL := WAC510
891 DEVICE_DTS_CONFIG := config@5
894 IMAGES += factory.tar
895 IMAGE/factory.tar := append-ubi | wac5xx-netgear-tar
896 DEVICE_PACKAGES := uboot-envtools
898 TARGET_DEVICES += netgear_wac510
900 define Device/openmesh_a42
901 $(call Device/FitImageLzma)
902 DEVICE_VENDOR := OpenMesh
905 DEVICE_DTS_CONFIG := config@om.a42
907 KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
909 IMAGES += factory.bin
910 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
911 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
913 TARGET_DEVICES += openmesh_a42
915 define Device/openmesh_a62
916 $(call Device/FitImageLzma)
917 DEVICE_VENDOR := OpenMesh
920 DEVICE_DTS_CONFIG := config@om.a62
922 KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
924 IMAGES += factory.bin
925 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
926 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
927 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
929 TARGET_DEVICES += openmesh_a62
931 define Device/p2w_r619ac
932 $(call Device/FitzImage)
933 $(call Device/UbiFit)
935 DEVICE_MODEL := R619AC
937 DEVICE_DTS_CONFIG := config@10
940 DEVICE_PACKAGES := ipq-wifi-p2w_r619ac
943 define Device/p2w_r619ac-64m
944 $(call Device/p2w_r619ac)
945 DEVICE_VARIANT := 64M NAND
946 IMAGES += factory.bin
947 IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
949 TARGET_DEVICES += p2w_r619ac-64m
951 define Device/p2w_r619ac-128m
952 $(call Device/p2w_r619ac)
953 DEVICE_VARIANT := 128M NAND
955 TARGET_DEVICES += p2w_r619ac-128m
957 define Device/pakedge_wr-1
958 $(call Device/FitImageLzma)
959 DEVICE_VENDOR := Pakedge
961 DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
962 DEVICE_PACKAGES := ipq-wifi-pakedge_wr-1
966 IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | append-metadata
968 TARGET_DEVICES += pakedge_wr-1
970 define Device/plasmacloud_pa1200
971 $(call Device/FitImageLzma)
972 DEVICE_VENDOR := Plasma Cloud
973 DEVICE_MODEL := PA1200
975 DEVICE_DTS_CONFIG := config@pc.pa1200
977 KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
979 IMAGES += factory.bin
980 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
981 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
983 TARGET_DEVICES += plasmacloud_pa1200
985 define Device/plasmacloud_pa2200
986 $(call Device/FitImageLzma)
987 DEVICE_VENDOR := Plasma Cloud
988 DEVICE_MODEL := PA2200
990 DEVICE_DTS_CONFIG := config@pc.pa2200
992 KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
994 IMAGES += factory.bin
995 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
996 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
997 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
999 TARGET_DEVICES += plasmacloud_pa2200
1001 define Device/qcom_ap-dk01.1-c1
1002 DEVICE_VENDOR := Qualcomm Atheros
1003 DEVICE_MODEL := AP-DK01.1
1004 DEVICE_VARIANT := C1
1005 BOARD_NAME := ap-dk01.1-c1
1007 DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
1009 KERNEL_SIZE := 4096k
1010 IMAGE_SIZE := 26624k
1011 $(call Device/FitImage)
1012 IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
1015 TARGET_DEVICES += qcom_ap-dk01.1-c1
1017 define Device/qcom_ap-dk04.1-c1
1018 $(call Device/FitImage)
1019 $(call Device/UbiFit)
1020 DEVICE_VENDOR := Qualcomm Atheros
1021 DEVICE_MODEL := AP-DK04.1
1022 DEVICE_VARIANT := C1
1024 DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
1026 KERNEL_SIZE := 4048k
1029 BOARD_NAME := ap-dk04.1-c1
1032 TARGET_DEVICES += qcom_ap-dk04.1-c1
1034 define Device/qxwlan_e2600ac-c1
1035 $(call Device/FitImage)
1036 DEVICE_VENDOR := Qxwlan
1037 DEVICE_MODEL := E2600AC
1038 DEVICE_VARIANT := C1
1039 BOARD_NAME := e2600ac-c1
1041 KERNEL_SIZE := 4096k
1042 IMAGE_SIZE := 31232k
1043 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1044 DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c1
1048 #TARGET_DEVICES += qxwlan_e2600ac-c1
1050 define Device/qxwlan_e2600ac-c2
1051 $(call Device/FitImage)
1052 $(call Device/UbiFit)
1053 DEVICE_VENDOR := Qxwlan
1054 DEVICE_MODEL := E2600AC
1055 DEVICE_VARIANT := C2
1060 DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c2
1063 #TARGET_DEVICES += qxwlan_e2600ac-c2
1065 define Device/sony_ncp-hg100-cellular
1066 $(call Device/FitImage)
1067 DEVICE_VENDOR := Sony
1068 DEVICE_MODEL := NCP-HG100/Cellular
1069 DEVICE_DTS_CONFIG := config@ap.dk04.1-c4
1071 KERNEL_SIZE := 8192k
1073 DEVICE_PACKAGES := e2fsprogs ipq-wifi-sony_ncp-hg100-cellular \
1076 TARGET_DEVICES += sony_ncp-hg100-cellular
1078 define Device/teltonika_rutx10
1079 $(call Device/FitImage)
1080 $(call Device/UbiFit)
1081 DEVICE_VENDOR := Teltonika
1082 DEVICE_MODEL := RUTX10
1084 DEVICE_DTS_CONFIG := config@5
1088 FILESYSTEMS := squashfs
1089 IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
1090 DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-bluetooth
1093 #TARGET_DEVICES += teltonika_rutx10
1095 define Device/tel_x1pro
1096 $(call Device/FitImage)
1097 DEVICE_VENDOR := Telco
1098 DEVICE_MODEL := X1 Pro
1100 KERNEL_SIZE := 4096k
1101 IMAGE_SIZE := 31232k
1102 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1103 DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1107 #TARGET_DEVICES += tel_x1pro
1109 define Device/unielec_u4019-32m
1110 $(call Device/FitImage)
1111 DEVICE_VENDOR := Unielec
1112 DEVICE_MODEL := U4019
1113 DEVICE_VARIANT := 32M
1114 BOARD_NAME := u4019-32m
1116 KERNEL_SIZE := 4096k
1117 IMAGE_SIZE := 31232k
1118 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1122 #TARGET_DEVICES += unielec_u4019-32m
1124 define Device/wallys_dr40x9
1125 $(call Device/FitImage)
1126 $(call Device/UbiFit)
1127 DEVICE_VENDOR := Wallys
1128 DEVICE_MODEL := DR40X9
1130 DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
1133 DEVICE_PACKAGES := ipq-wifi-wallys_dr40x9
1135 TARGET_DEVICES += wallys_dr40x9
1137 define Device/zte_mf18a
1138 $(call Device/FitImage)
1139 DEVICE_VENDOR := ZTE
1140 DEVICE_MODEL := MF18A
1142 DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
1146 DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct ipq-wifi-zte_mf18a
1148 TARGET_DEVICES += zte_mf18a
1150 define Device/zte_mf28x_common
1151 $(call Device/FitzImage)
1152 DEVICE_VENDOR := ZTE
1154 DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
1158 DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1161 define Device/zte_mf286d
1162 $(call Device/zte_mf28x_common)
1163 DEVICE_MODEL := MF286D
1165 TARGET_DEVICES += zte_mf286d
1167 define Device/zte_mf289f
1168 $(call Device/zte_mf28x_common)
1169 DEVICE_MODEL := MF289F
1170 DEVICE_PACKAGES += ipq-wifi-zte_mf289f ath10k-firmware-qca9984-ct
1172 TARGET_DEVICES += zte_mf289f
1174 define Device/zyxel_nbg6617
1175 $(call Device/FitImageLzma)
1176 DEVICE_VENDOR := ZyXEL
1177 DEVICE_MODEL := NBG6617
1179 KERNEL_SIZE := 4096k
1180 ROOTFS_SIZE := 24960k
1181 RAS_BOARD := NBG6617
1182 RAS_ROOTFS_SIZE := 19840k
1183 RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
1184 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1185 IMAGES += factory.bin
1186 # The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
1187 # at least as large as the one of the initial firmware image (not the current
1188 # one on the device). This only applies to the Web-UI, the bootlaoder ignores
1189 # this minimum-size. However, the larger image can be flashed both ways.
1190 IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
1191 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
1192 DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
1194 TARGET_DEVICES += zyxel_nbg6617
1196 define Device/zyxel_wre6606
1197 $(call Device/FitImage)
1198 DEVICE_VENDOR := ZyXEL
1199 DEVICE_MODEL := WRE6606
1200 DEVICE_DTS_CONFIG := config@4
1202 IMAGE_SIZE := 13184k
1203 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
1204 DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
1207 #TARGET_DEVICES += zyxel_wre6606