2 DEVICE_VARS
+= NETGEAR_BOARD_ID NETGEAR_HW_ID
3 DEVICE_VARS
+= RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
4 DEVICE_VARS
+= WRGG_DEVNAME WRGG_SIGNATURE
7 KERNEL_SUFFIX
:= -uImage.itb
8 KERNEL
= kernel-bin | gzip | fit gzip
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb
12 define Device
/FitImageLzma
13 KERNEL_SUFFIX
:= -uImage.itb
14 KERNEL
= kernel-bin | lzma | fit lzma
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb
18 define Device
/FitzImage
19 KERNEL_SUFFIX
:= -zImage.itb
20 KERNEL
= kernel-bin | fit none
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb
26 IMAGES
:= factory.ubi sysupgrade.bin
27 IMAGE
/factory.ubi
:= append-ubi
28 IMAGE
/sysupgrade.bin
:= sysupgrade-tar | append-metadata
31 define Device
/DniImage
32 $(call Device
/FitzImage
)
36 IMAGE
/factory.img
:= append-kernel | pad-offset
64k
64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
37 IMAGE
/sysupgrade.bin
:= append-kernel | pad-offset
64k
64 | append-uImage-fakehdr filesystem | \
38 append-rootfs | pad-rootfs | check-size | append-metadata
41 define Build
/append-rootfshdr
42 mkimage
-A
$(LINUX_KARCH
) \
43 -O linux
-T filesystem \
44 -C lzma
-a
$(KERNEL_LOADADDR
) -e
$(if
$(KERNEL_ENTRY
),$(KERNEL_ENTRY
),$(KERNEL_LOADADDR
)) \
45 -n root.squashfs
-d
$(IMAGE_ROOTFS
) $@.new
46 cat
$(IMAGE_KERNEL
) > $@.
$1
47 dd if
=$@.new bs
=64 count
=1 >> $@.
$1
50 define Build
/append-rutx-metadata
53 "device_code": [".*"], \
57 "supported_devices":["teltonika,rutx"] \
61 define Build
/copy-file
65 define Build
/mkmylofw_32m
66 $(eval device_id
=$(word 1,$(1)))
67 $(eval revision
=$(word 2,$(1)))
70 size
="$$(stat -c%s $@)" \
71 pad
="$(subst k,* 1024,$(BLOCKSIZE))" \
72 pad
="(pad - (size % pad)) % pad" \
73 newsize
='size + pad'; \
74 $(STAGING_DIR_HOST
)/bin
/mkmylofw \
75 -B WPE72
-i
0x11f6:$(device_id
):0x11f6:$(device_id
) -r
$(revision
) \
76 -s
0x2000000 -p0x180000
:$$newsize:al
:0x80208000:"OpenWrt":$@ \
81 define Build
/wac5xx-netgear-tar
83 mv
$@
$@.tmp
/wac5xx-ubifs-root.img
84 md5sum
$@.tmp
/wac5xx-ubifs-root.img
> $@.tmp
/wac5xx-ubifs-root.md5sum
85 echo
"WAC505 WAC510" > $@.tmp
/metadata.txt
86 echo
"WAC505_V9.9.9.9" > $@.tmp
/version
87 tar -C
$@.tmp
/ -cf
$@ .
91 define Build
/qsdk-ipq-factory-nand-askey
92 $(TOPDIR
)/scripts
/mkits-qsdk-ipq-image.sh
$@.its\
94 askey_fs
$(IMAGE_ROOTFS
) \
96 PATH
=$(LINUX_DIR
)/scripts
/dtc
:$(PATH
) mkimage
-f
$@.its
$@.new
100 define Build
/qsdk-ipq-app-gpt
101 cp
$@
$@.tmp
2>/dev
/null || true
102 ptgen
-g
-o
$@.tmp
-a
1 -l
1024 \
103 -t
0x2e -N
0:HLOS
-r
-p
32M \
104 -t
0x83 -N rootfs
-r
-p
128M \
105 -N rootfs_data
-p
512M
111 -$(STAGING_DIR_HOST
)/bin
/mksenaofw \
112 -n
$(BOARD_NAME
) -r
$(VENDOR_ID
) -p
$(1) \
113 -c
$(DATECODE
) -w
$(2) -x
$(CW_VER
) -t
0 \
119 define Build
/wrgg-image
122 -d
"$(WRGG_DEVNAME)" \
123 -s
"$(WRGG_SIGNATURE)" \
128 define Device
/8dev_habanero-dvk
129 $(call Device
/FitImageLzma
)
130 DEVICE_VENDOR
:= 8devices
131 DEVICE_MODEL
:= Habanero DVK
134 IMAGE
/sysupgrade.bin
:= append-kernel | pad-to
64k | append-rootfs | pad-rootfs | check-size | append-metadata
136 TARGET_DEVICES
+= 8dev_habanero-dvk
138 define Device
/8dev_jalapeno-common
139 $(call Device
/FitImage
)
140 $(call Device
/UbiFit
)
146 define Device
/8dev_jalapeno
147 $(call Device
/8dev_jalapeno-common
)
148 DEVICE_VENDOR
:= 8devices
149 DEVICE_MODEL
:= Jalapeno
151 TARGET_DEVICES
+= 8dev_jalapeno
153 define Device
/alfa-network_ap120c-ac
154 $(call Device
/FitImage
)
155 $(call Device
/UbiFit
)
156 DEVICE_VENDOR
:= ALFA Network
157 DEVICE_MODEL
:= AP120C-AC
159 DEVICE_PACKAGES
:= kmod-usb-acm kmod-tpm-i2c-atmel
163 IMAGES
:= factory.bin sysupgrade.bin
164 IMAGE
/factory.bin
:= append-ubi | qsdk-ipq-factory-nand
166 TARGET_DEVICES
+= alfa-network_ap120c-ac
168 define Device
/aruba_glenmorangie
169 $(call Device
/FitImageLzma
)
170 DEVICE_VENDOR
:= Aruba
174 define Device
/aruba_ap-303
175 $(call Device
/aruba_glenmorangie
)
176 DEVICE_MODEL
:= AP-303
178 TARGET_DEVICES
+= aruba_ap-303
180 define Device
/aruba_ap-303h
181 $(call Device
/aruba_glenmorangie
)
182 DEVICE_MODEL
:= AP-303H
184 TARGET_DEVICES
+= aruba_ap-303h
186 define Device
/aruba_ap-365
187 $(call Device
/aruba_glenmorangie
)
188 DEVICE_MODEL
:= AP-365
189 DEVICE_PACKAGES
:= kmod-hwmon-ad7418
191 TARGET_DEVICES
+= aruba_ap-365
193 define Device
/asus_map-ac2200
194 $(call Device
/FitImageLzma
)
195 DEVICE_VENDOR
:= ASUS
196 DEVICE_MODEL
:= Lyra
(MAP-AC2200
)
198 DEVICE_PACKAGES
:= ath10k-firmware-qca9888-ct kmod-ath3k
200 TARGET_DEVICES
+= asus_map-ac2200
202 # WARNING: this is an initramfs image that gets you half of the way there
203 # you need to delete the jffs2 ubi volume and sysupgrade to the final image
204 # to get a "trx" you can flash via web UI for ac42u/ac58u:
205 # - change call Device/FitImageLzma to Device/FitImage
206 # - add the following below UIMAGE_NAME
207 # UIMAGE_MAGIC := 0x27051956
208 # IMAGES += factory.trx
209 # IMAGE/factory.trx := copy-file $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE) | uImage none
210 define Device
/asus_rt-ac42u
211 $(call Device
/FitImageLzma
)
212 DEVICE_VENDOR
:= ASUS
213 DEVICE_MODEL
:= RT-AC42U
214 DEVICE_ALT0_VENDOR
:= ASUS
215 DEVICE_ALT0_MODEL
:= RT-ACRH17
216 DEVICE_ALT1_VENDOR
:= ASUS
217 DEVICE_ALT1_MODEL
:= RT-AC2200
221 IMAGE_SIZE
:= 20439364
222 FILESYSTEMS
:= squashfs
223 # RT-AC82U is nowhere to be found online
224 # Rather, this device is a/k/a RT-AC42U
225 # But we'll go with what the vendor firmware has...
226 UIMAGE_NAME
:=$(shell echo
-e
'\03\01\01\01RT-AC82U')
227 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct kmod-usb-ledtrig-usbport
229 TARGET_DEVICES
+= asus_rt-ac42u
231 define Device
/asus_rt-ac58u
232 $(call Device
/FitImageLzma
)
233 DEVICE_VENDOR
:= ASUS
234 DEVICE_MODEL
:= RT-AC58U
235 DEVICE_ALT0_VENDOR
:= ASUS
236 DEVICE_ALT0_MODEL
:= RT-ACRH13
240 IMAGE_SIZE
:= 20439364
241 FILESYSTEMS
:= squashfs
242 # Someone - in their infinite wisdom - decided to put the firmware
243 # version in front of the image name \03\00\00\04 => Version 3.0.0.4
244 # Since u-boot works with strings we either need another fixup step
245 # to add a version... or we are very careful not to add '\0' into that
246 # string and call it a day.... Yeah, we do the latter!
247 UIMAGE_NAME
:=$(shell echo
-e
'\03\01\01\01RT-AC58U')
248 DEVICE_PACKAGES
:= -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
249 kmod-usb-ledtrig-usbport
251 TARGET_DEVICES
+= asus_rt-ac58u
253 define Device
/avm_fritzbox-4040
254 $(call Device
/FitImageLzma
)
256 DEVICE_MODEL
:= FRITZ
!Box
4040
258 BOARD_NAME
:= fritz4040
260 UBOOT_PATH
:= $(STAGING_DIR_IMAGE
)/uboot-fritz4040.bin
261 UBOOT_PARTITION_SIZE
:= 524288
263 IMAGE
/eva.bin
:= append-uboot | pad-to
$$$$(UBOOT_PARTITION_SIZE
) | append-kernel | append-rootfs | pad-rootfs
264 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
265 DEVICE_PACKAGES
:= fritz-tffs fritz-caldata
267 TARGET_DEVICES
+= avm_fritzbox-4040
269 define Device
/avm_fritzbox-7530
270 $(call Device
/FitImageLzma
)
272 DEVICE_MODEL
:= FRITZ
!Box
7530
273 DEVICE_ALT0_VENDOR
:= AVM
274 DEVICE_ALT0_MODEL
:= FRITZ
!Box
7520
276 DEVICE_PACKAGES
:= fritz-caldata fritz-tffs-nand ltq-vdsl-vr11-app
278 TARGET_DEVICES
+= avm_fritzbox-7530
280 define Device
/avm_fritzrepeater-1200
281 $(call Device
/FitImageLzma
)
283 DEVICE_MODEL
:= FRITZ
!Repeater
1200
285 DEVICE_PACKAGES
:= fritz-caldata fritz-tffs-nand
287 TARGET_DEVICES
+= avm_fritzrepeater-1200
289 define Device
/avm_fritzrepeater-3000
290 $(call Device
/FitImageLzma
)
292 DEVICE_MODEL
:= FRITZ
!Repeater
3000
294 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
296 TARGET_DEVICES
+= avm_fritzrepeater-3000
298 define Device
/buffalo_wtr-m2133hp
299 $(call Device
/FitImage
)
300 $(call Device
/UbiFit
)
301 DEVICE_VENDOR
:= Buffalo
302 DEVICE_MODEL
:= WTR-M2133HP
304 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct
308 TARGET_DEVICES
+= buffalo_wtr-m2133hp
310 define Device
/cellc_rtl30vw
311 KERNEL_SUFFIX
:= -zImage.itb
312 KERNEL_INITRAMFS
= kernel-bin | gzip | fit gzip
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb
313 KERNEL
= kernel-bin | fit none
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb | uImage lzma | pad-to
2048
314 KERNEL_NAME
:= zImage
316 IMAGES
:= factory.bin sysupgrade.bin
317 IMAGE
/factory.bin
:= append-rootfshdr kernel | append-ubi | qsdk-ipq-factory-nand-askey kernel
318 IMAGE
/sysupgrade.bin
:= append-rootfshdr kernel | sysupgrade-tar kernel
=$$$$@.kernel | append-metadata
319 DEVICE_VENDOR
:= Cell C
320 DEVICE_MODEL
:= RTL30VW
322 DEVICE_DTS_CONFIG
:= config@
5
328 DEVICE_PACKAGES
:= kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
330 TARGET_DEVICES
+= cellc_rtl30vw
332 define Device
/cilab_meshpoint-one
333 $(call Device
/8dev_jalapeno-common
)
334 DEVICE_VENDOR
:= Crisis Innovation Lab
335 DEVICE_MODEL
:= MeshPoint.One
336 DEVICE_PACKAGES
+= kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
339 #TARGET_DEVICES += cilab_meshpoint-one
341 define Device
/compex_wpj419
342 $(call Device
/FitImage
)
343 $(call Device
/UbiFit
)
344 DEVICE_VENDOR
:= Compex
345 DEVICE_MODEL
:= WPJ419
347 DEVICE_DTS_CONFIG
:= config@
12
351 FILESYSTEMS
:= squashfs
354 #TARGET_DEVICES += compex_wpj419
356 define Device
/compex_wpj428
357 $(call Device
/FitImage
)
358 DEVICE_VENDOR
:= Compex
359 DEVICE_MODEL
:= WPJ428
361 DEVICE_DTS_CONFIG
:= config@
4
365 IMAGES
+= cpximg-6a04.bin
366 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
367 IMAGE
/cpximg-6a04.bin
:= append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m
0x8A2 3
368 DEVICE_PACKAGES
:= kmod-gpio-beeper
371 TARGET_DEVICES
+= compex_wpj428
373 define Device
/devolo_magic-2-wifi-next
374 $(call Device
/FitzImage
)
375 DEVICE_VENDOR
:= devolo
376 DEVICE_MODEL
:= Magic
2 WiFi next
380 # If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
381 # it will bootm it, just like we want for the initramfs.
382 KERNEL_INITRAMFS
:= kernel-bin | gzip | fit gzip
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb | pad-to
64k |\
383 append-string
-e
'\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
386 IMAGES
:= sysupgrade.bin
387 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
390 TARGET_DEVICES
+= devolo_magic-2-wifi-next
392 define Device
/dlink_dap-2610
393 $(call Device
/FitImageLzma
)
394 DEVICE_VENDOR
:= D-Link
395 DEVICE_MODEL
:= DAP-2610
397 DEVICE_DTS_CONFIG
:= config@ap.dk01.1
-c1
399 WRGG_DEVNAME
:= /dev
/mtdblock
/8
400 WRGG_SIGNATURE
:= wapac30_dkbs_dap2610
402 IMAGES
+= factory.bin
403 # Bootloader expects a special 160 byte header which is added by
405 # Factory image size must be larger than 6MB, and size in wrgg header must
406 # match actual factory image size to be flashable from D-Link http server.
407 # Bootloader verifies checksum of wrgg image before booting, thus jffs2
408 # cannot be part of the wrgg image. This is solved in the factory image by
409 # having the rootfs at the end of the image (without pad-rootfs). And in
410 # the sysupgrade image only the kernel is included in the wrgg checksum,
411 # but this is not flashable from the D-link http server.
412 # append-rootfs must start on an erase block boundary.
413 IMAGE
/factory.bin
:= append-kernel | pad-offset
6144k
160 | append-rootfs | wrgg-image | check-size
414 IMAGE
/sysupgrade.bin
:= append-kernel | wrgg-image | pad-to
$$$$(BLOCKSIZE
) | append-rootfs | pad-rootfs | check-size | append-metadata
416 TARGET_DEVICES
+= dlink_dap-2610
418 define Device
/edgecore_ecw5211
419 $(call Device
/FitImage
)
420 $(call Device
/UbiFit
)
421 DEVICE_VENDOR
:= Edgecore
422 DEVICE_MODEL
:= ECW5211
426 DEVICE_DTS_CONFIG
:= config@ap.dk01.1
-c2
427 DEVICE_PACKAGES
:= kmod-tpm-i2c-atmel kmod-usb-acm
429 TARGET_DEVICES
+= edgecore_ecw5211
431 define Device
/edgecore_oap100
432 $(call Device
/FitImage
)
433 $(call Device
/UbiFit
)
434 DEVICE_VENDOR
:= Edgecore
435 DEVICE_MODEL
:= OAP100
439 IMAGES
:= sysupgrade.bin
440 DEVICE_DTS_CONFIG
:= config@ap.dk07.1
-c1
441 DEVICE_PACKAGES
:= kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
444 #TARGET_DEVICES += edgecore_oap100
446 define Device
/engenius_eap1300
447 $(call Device
/FitImage
)
448 DEVICE_VENDOR
:= EnGenius
449 DEVICE_MODEL
:= EAP1300
450 DEVICE_DTS_CONFIG
:= config@
4
451 BOARD_NAME
:= eap1300
455 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
458 #TARGET_DEVICES += engenius_eap1300
460 define Device
/engenius_eap2200
461 $(call Device
/FitImage
)
462 $(call Device
/UbiFit
)
463 DEVICE_VENDOR
:= EnGenius
464 DEVICE_MODEL
:= EAP2200
468 DEVICE_PACKAGES
:= ath10k-firmware-qca9888-ct
-kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
471 #TARGET_DEVICES += engenius_eap2200
473 define Device
/engenius_emd1
474 $(call Device
/FitImage
)
475 DEVICE_VENDOR
:= EnGenius
477 DEVICE_DTS_CONFIG
:= config@
4
480 IMAGES
+= factory.bin
481 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
482 IMAGE
/factory.bin
:= qsdk-ipq-factory-nor | check-size
485 #TARGET_DEVICES += engenius_emd1
487 define Device
/engenius_emr3500
488 $(call Device
/FitImage
)
489 DEVICE_VENDOR
:= EnGenius
490 DEVICE_MODEL
:= EMR3500
491 DEVICE_DTS_CONFIG
:= config@
4
495 IMAGES
+= factory.bin
496 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
497 IMAGE
/factory.bin
:= qsdk-ipq-factory-nor | check-size
501 #TARGET_DEVICES += engenius_emr3500
503 define Device
/engenius_ens620ext
504 $(call Device
/FitImage
)
505 DEVICE_VENDOR
:= EnGenius
506 DEVICE_MODEL
:= ENS620EXT
508 DEVICE_DTS_CONFIG
:= config@
4
511 BOARD_NAME
:= ENS620EXT
514 PRODUCT_ID_NEW
:= 0xA4
521 FILESYSTEMS
:= squashfs
522 IMAGES
+= factory_30.bin factory_35.bin
523 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
524 IMAGE
/factory_30.bin
:= append-kernel | pad-to
$$$$(KERNEL_SIZE
) | append-rootfs | pad-rootfs | check-size | SenaoFW
$$$$(PRODUCT_ID
) $$$$(FW_VER
)
525 IMAGE
/factory_35.bin
:= qsdk-ipq-factory-nor | check-size | SenaoFW
$$$$(PRODUCT_ID_NEW
) $$$$(FW_VER_NEW
)
528 #TARGET_DEVICES += engenius_ens620ext
530 define Device
/extreme-networks_ws-ap3915i
531 $(call Device
/FitImage
)
532 DEVICE_VENDOR
:= Extreme Networks
533 DEVICE_MODEL
:= WS-AP3915i
537 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
539 TARGET_DEVICES
+= extreme-networks_ws-ap3915i
541 define Device
/ezviz_cs-w3-wd1200g-eup
542 $(call Device
/FitImage
)
543 DEVICE_VENDOR
:= EZVIZ
544 DEVICE_MODEL
:= CS-W3-WD1200G
545 DEVICE_VARIANT
:= EUP
549 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | \
551 DEVICE_PACKAGES
:= -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
552 DEVICE_COMPAT_VERSION
:= 2.0
553 DEVICE_COMPAT_MESSAGE
:= uboot
's bootcmd has to be updated (see wiki). \
554 Upgrade via sysupgrade mechanism is not possible.
556 TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
558 define Device/glinet_gl-a1300
559 $(call Device/FitImage)
560 $(call Device/UbiFit)
561 DEVICE_VENDOR := GL.iNet
562 DEVICE_MODEL := GL-A1300
564 DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
567 IMAGE_SIZE := 131072k
569 TARGET_DEVICES += glinet_gl-a1300
571 define Device/glinet_gl-ap1300
572 $(call Device/FitImage)
573 $(call Device/UbiFit)
574 DEVICE_VENDOR := GL.iNet
575 DEVICE_MODEL := GL-AP1300
577 DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
580 IMAGE_SIZE := 131072k
582 DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
584 TARGET_DEVICES += glinet_gl-ap1300
586 define Device/glinet_gl-b1300
587 $(call Device/FitzImage)
588 DEVICE_VENDOR := GL.iNet
589 DEVICE_MODEL := GL-B1300
590 BOARD_NAME := gl-b1300
594 IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
596 TARGET_DEVICES += glinet_gl-b1300
598 define Device/glinet_gl-b2200
599 $(call Device/FitzImage)
600 DEVICE_VENDOR := GL.iNet
601 DEVICE_MODEL := GL-B2200
603 DEVICE_DTS_CONFIG := config@ap.dk04.1-c3
604 KERNEL_INITRAMFS_SUFFIX := -recovery.itb
605 IMAGES := emmc.img.gz sysupgrade.bin
606 IMAGE/emmc.img.gz := qsdk-ipq-app-gpt |\
607 pad-to 1024k | append-kernel |\
608 pad-to 33792k | append-rootfs |\
609 append-metadata | gzip
610 IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
611 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct \
612 kmod-fs-ext4 kmod-mmc kmod-spi-dev mkf2fs e2fsprogs kmod-fs-f2fs
614 TARGET_DEVICES += glinet_gl-b2200
616 define Device/glinet_gl-s1300
617 $(call Device/FitzImage)
618 DEVICE_VENDOR := GL.iNet
619 DEVICE_MODEL := GL-S1300
623 IMAGES := sysupgrade.bin
624 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
625 DEVICE_PACKAGES := kmod-fs-ext4 kmod-mmc kmod-spi-dev
628 #TARGET_DEVICES += glinet_gl-s1300
630 define Device/kernel-size-6350-8300
631 DEVICE_COMPAT_VERSION := 2.0
632 DEVICE_COMPAT_MESSAGE := Kernel partition size must be increased for \
633 this OpenWrt version. Before continuing, you MUST issue either the \
634 command "fw_setenv kernsize 500000" from the OpenWrt command line, \
635 or "setenv kernsize 500000 ; saveenv" from the U-Boot serial console. \
636 Instead of the sysupgrade image, you must then install the OpenWrt \
637 factory image, setting the force flag and wiping the configuration. \
638 (e.g. "sysupgrade -n -F openwrt-squashfs-factory.bin" on command line)
641 define Device/linksys_ea6350v3
642 # The Linksys EA6350v3 has a uboot bootloader that does not
643 # support either booting lzma kernel images nor booting UBI
644 # partitions. This uboot, however, supports raw kernel images and
647 # As configured by the OEM factory, the device will boot the kernel
648 # from a fixed address with a fixed length of 3 MiB. Also, the
649 # device has a hard-coded kernel command line that requires the
650 # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
651 # Oh... and the kernel partition overlaps with the rootfs
652 # partition (the same for alt_kernel and alt_rootfs).
654 # If you are planing re-partitioning the device, you may want to
655 # keep these details in mind:
656 # 1. The kernel addresses you should honor are 0x00000000 and
657 # 0x02800000 respectively.
658 # 2. The kernel size (plus the dtb) cannot exceed 3 MiB in size
659 # unless the uboot environment variable "kernsize" is increased.
660 # 3. You can use 'zImage
', but not a raw 'Image
' packed with lzma.
661 # 4. The kernel command line from uboot is harcoded to boot with
662 # rootfs either in mtd11 or mtd13.
663 $(call Device/FitzImage)
664 $(call Device/kernel-size-6350-8300)
665 DEVICE_VENDOR := Linksys
666 DEVICE_MODEL := EA6350
674 IMAGES += factory.bin
675 IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
677 TARGET_DEVICES += linksys_ea6350v3
679 define Device/linksys_ea8300
680 $(call Device/FitzImage)
681 $(call Device/kernel-size-6350-8300)
682 DEVICE_VENDOR := Linksys
683 DEVICE_MODEL := EA8300
689 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
690 IMAGES += factory.bin
691 IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
692 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
694 TARGET_DEVICES += linksys_ea8300
696 define Device/linksys_mr8300
697 $(call Device/FitzImage)
698 $(call Device/kernel-size-6350-8300)
699 DEVICE_VENDOR := Linksys
700 DEVICE_MODEL := MR8300
706 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
707 IMAGES += factory.bin
708 IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
709 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
711 TARGET_DEVICES += linksys_mr8300
713 define Device/linksys_whw03v2
714 $(call Device/FitzImage)
715 DEVICE_VENDOR := Linksys
716 DEVICE_MODEL := WHW03
720 IMAGE_SIZE := 158720k
723 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
724 IMAGES += factory.bin
725 IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW03v2
726 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-leds-pca963x kmod-spi-dev kmod-bluetooth
728 TARGET_DEVICES += linksys_whw03v2
730 define Device/linksys_whw01
731 $(call Device/FitzImage)
732 DEVICE_VENDOR := Linksys
733 DEVICE_MODEL := WHW01
739 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
740 IMAGES += factory.bin
741 IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW01
742 DEVICE_PACKAGES := uboot-envtools kmod-leds-pca963x
744 TARGET_DEVICES += linksys_whw01
746 define Device/luma_wrtq-329acn
747 $(call Device/FitImage)
748 DEVICE_VENDOR := Luma Home
749 DEVICE_MODEL := WRTQ-329ACN
751 DEVICE_PACKAGES := kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio
756 TARGET_DEVICES += luma_wrtq-329acn
758 define Device/meraki_common
759 $(call Device/FitImage)
760 DEVICE_VENDOR := Cisco Meraki
764 DEVICE_DTS_LOADADDR := 0x89000000
765 DEVICE_PACKAGES := ath10k-firmware-qca9887-ct
768 define Device/meraki_mr33
769 $(call Device/meraki_common)
772 TARGET_DEVICES += meraki_mr33
774 define Device/meraki_mr74
775 $(call Device/meraki_common)
777 DEVICE_DTS_CONFIG := config@3
779 TARGET_DEVICES += meraki_mr74
781 define Device/mobipromo_cm520-79f
782 $(call Device/FitzImage)
783 $(call Device/UbiFit)
784 DEVICE_VENDOR := MobiPromo
785 DEVICE_MODEL := CM520-79F
789 DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
791 TARGET_DEVICES += mobipromo_cm520-79f
793 define Device/netgear_ex61x0v2
794 $(call Device/DniImage)
795 DEVICE_VENDOR := NETGEAR
796 DEVICE_DTS_CONFIG := config@4
797 NETGEAR_BOARD_ID := EX6150v2series
798 NETGEAR_HW_ID := 29765285+16+0+128+2x2
803 define Device/netgear_ex6100v2
804 $(call Device/netgear_ex61x0v2)
805 DEVICE_MODEL := EX6100
808 TARGET_DEVICES += netgear_ex6100v2
810 define Device/netgear_ex6150v2
811 $(call Device/netgear_ex61x0v2)
812 DEVICE_MODEL := EX6150
815 TARGET_DEVICES += netgear_ex6150v2
817 define Device/netgear_orbi
818 $(call Device/DniImage)
820 DEVICE_VENDOR := NETGEAR
821 IMAGE/factory.img := append-kernel | pad-offset 128k 64 | \
822 append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | \
823 append-rootfs | pad-rootfs | netgear-dni
824 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | \
825 sysupgrade-tar rootfs=$$$$@ | append-metadata
826 DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
829 define Device/netgear_rbx40
830 $(call Device/netgear_orbi)
831 NETGEAR_HW_ID := 29765515+0+4096+512+2x2+2x2+2x2
832 KERNEL_SIZE := 3932160
833 ROOTFS_SIZE := 32243712
834 IMAGE_SIZE := 36175872
837 define Device/netgear_rbr40
838 $(call Device/netgear_rbx40)
839 DEVICE_MODEL := RBR40
841 NETGEAR_BOARD_ID := RBR40
843 TARGET_DEVICES += netgear_rbr40
845 define Device/netgear_rbs40
846 $(call Device/netgear_rbx40)
847 DEVICE_MODEL := RBS40
849 NETGEAR_BOARD_ID := RBS40
851 TARGET_DEVICES += netgear_rbs40
853 define Device/netgear_rbx50
854 $(call Device/netgear_orbi)
855 NETGEAR_HW_ID := 29765352+0+4000+512+2x2+2x2+4x4
856 KERNEL_SIZE := 3932160
857 ROOTFS_SIZE := 32243712
858 IMAGE_SIZE := 36175872
861 define Device/netgear_rbr50
862 $(call Device/netgear_rbx50)
863 DEVICE_MODEL := RBR50
865 NETGEAR_BOARD_ID := RBR50
867 TARGET_DEVICES += netgear_rbr50
869 define Device/netgear_rbs50
870 $(call Device/netgear_rbx50)
871 DEVICE_MODEL := RBS50
873 NETGEAR_BOARD_ID := RBS50
875 TARGET_DEVICES += netgear_rbs50
877 define Device/netgear_srx60
878 $(call Device/netgear_orbi)
879 NETGEAR_HW_ID := 29765352+0+4096+512+2x2+2x2+4x4
880 KERNEL_SIZE := 3932160
881 ROOTFS_SIZE := 32243712
882 IMAGE_SIZE := 36175872
885 define Device/netgear_srr60
886 $(call Device/netgear_srx60)
887 DEVICE_MODEL := SRR60
888 NETGEAR_BOARD_ID := SRR60
890 TARGET_DEVICES += netgear_srr60
892 define Device/netgear_srs60
893 $(call Device/netgear_srx60)
894 DEVICE_MODEL := SRS60
895 NETGEAR_BOARD_ID := SRS60
897 TARGET_DEVICES += netgear_srs60
899 define Device/netgear_wac510
900 $(call Device/FitImage)
901 $(call Device/UbiFit)
902 DEVICE_VENDOR := Netgear
903 DEVICE_MODEL := WAC510
905 DEVICE_DTS_CONFIG := config@5
908 IMAGES += factory.tar
909 IMAGE/factory.tar := append-ubi | wac5xx-netgear-tar
910 DEVICE_PACKAGES := uboot-envtools
912 TARGET_DEVICES += netgear_wac510
914 define Device/openmesh_a42
915 $(call Device/FitImageLzma)
916 DEVICE_VENDOR := OpenMesh
919 DEVICE_DTS_CONFIG := config@om.a42
921 KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
923 IMAGES += factory.bin
924 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
925 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
927 TARGET_DEVICES += openmesh_a42
929 define Device/openmesh_a62
930 $(call Device/FitImageLzma)
931 DEVICE_VENDOR := OpenMesh
934 DEVICE_DTS_CONFIG := config@om.a62
936 KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
938 IMAGES += factory.bin
939 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
940 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
941 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
943 TARGET_DEVICES += openmesh_a62
945 define Device/p2w_r619ac
946 $(call Device/FitzImage)
947 $(call Device/UbiFit)
949 DEVICE_MODEL := R619AC
951 DEVICE_DTS_CONFIG := config@10
956 define Device/p2w_r619ac-64m
957 $(call Device/p2w_r619ac)
958 DEVICE_VARIANT := 64M NAND
959 IMAGES += factory.bin
960 IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
962 TARGET_DEVICES += p2w_r619ac-64m
964 define Device/p2w_r619ac-128m
965 $(call Device/p2w_r619ac)
966 DEVICE_VARIANT := 128M NAND
968 TARGET_DEVICES += p2w_r619ac-128m
970 define Device/pakedge_wr-1
971 $(call Device/FitImageLzma)
972 DEVICE_VENDOR := Pakedge
974 DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
978 IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | append-metadata
980 TARGET_DEVICES += pakedge_wr-1
982 define Device/plasmacloud_pa1200
983 $(call Device/FitImageLzma)
984 DEVICE_VENDOR := Plasma Cloud
985 DEVICE_MODEL := PA1200
987 DEVICE_DTS_CONFIG := config@pc.pa1200
989 KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
991 IMAGES += factory.bin
992 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
993 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
995 TARGET_DEVICES += plasmacloud_pa1200
997 define Device/plasmacloud_pa2200
998 $(call Device/FitImageLzma)
999 DEVICE_VENDOR := Plasma Cloud
1000 DEVICE_MODEL := PA2200
1002 DEVICE_DTS_CONFIG := config@pc.pa2200
1004 KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
1005 IMAGE_SIZE := 15552k
1006 IMAGES += factory.bin
1007 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
1008 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
1009 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
1011 TARGET_DEVICES += plasmacloud_pa2200
1013 define Device/qxwlan_e2600ac-c1
1014 $(call Device/FitImage)
1015 DEVICE_VENDOR := Qxwlan
1016 DEVICE_MODEL := E2600AC
1017 DEVICE_VARIANT := C1
1018 BOARD_NAME := e2600ac-c1
1020 IMAGE_SIZE := 31232k
1021 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1023 TARGET_DEVICES += qxwlan_e2600ac-c1
1025 define Device/qxwlan_e2600ac-c2
1026 $(call Device/FitImage)
1027 $(call Device/UbiFit)
1028 DEVICE_VENDOR := Qxwlan
1029 DEVICE_MODEL := E2600AC
1030 DEVICE_VARIANT := C2
1036 TARGET_DEVICES += qxwlan_e2600ac-c2
1038 define Device/sony_ncp-hg100-cellular
1039 $(call Device/FitImage)
1040 DEVICE_VENDOR := Sony
1041 DEVICE_MODEL := NCP-HG100/Cellular
1042 DEVICE_DTS_CONFIG := config@ap.dk04.1-c4
1044 KERNEL_SIZE := 8192k
1046 DEVICE_PACKAGES := e2fsprogs kmod-fs-ext4 uqmi
1048 TARGET_DEVICES += sony_ncp-hg100-cellular
1050 define Device/teltonika_rutx10
1051 $(call Device/FitImage)
1052 $(call Device/UbiFit)
1053 DEVICE_VENDOR := Teltonika
1054 DEVICE_MODEL := RUTX10
1056 DEVICE_DTS_CONFIG := config@5
1060 FILESYSTEMS := squashfs
1061 IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
1062 DEVICE_PACKAGES := kmod-bluetooth
1065 #TARGET_DEVICES += teltonika_rutx10
1067 define Device/teltonika_rutx50
1068 $(call Device/FitImage)
1069 $(call Device/UbiFit)
1070 DEVICE_VENDOR := Teltonika
1071 DEVICE_MODEL := RUTX50
1073 DEVICE_DTS_CONFIG := config@5
1077 FILESYSTEMS := squashfs
1078 IMAGE/factory.ubi := append-ubi
1079 DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1081 TARGET_DEVICES += teltonika_rutx50
1083 define Device/tel_x1pro
1084 $(call Device/FitImage)
1085 DEVICE_VENDOR := Telco
1086 DEVICE_MODEL := X1 Pro
1088 KERNEL_SIZE := 4096k
1089 IMAGE_SIZE := 31232k
1090 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1091 DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1095 #TARGET_DEVICES += tel_x1pro
1097 define Device/unielec_u4019-32m
1098 $(call Device/FitImage)
1099 DEVICE_VENDOR := Unielec
1100 DEVICE_MODEL := U4019
1101 DEVICE_VARIANT := 32M
1102 BOARD_NAME := u4019-32m
1104 KERNEL_SIZE := 4096k
1105 IMAGE_SIZE := 31232k
1106 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1110 #TARGET_DEVICES += unielec_u4019-32m
1112 define Device/wallys_dr40x9
1113 $(call Device/FitImage)
1114 $(call Device/UbiFit)
1115 DEVICE_VENDOR := Wallys
1116 DEVICE_MODEL := DR40X9
1118 DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
1121 DEVICE_PACKAGES := ipq-wifi-wallys_dr40x9
1123 TARGET_DEVICES += wallys_dr40x9
1125 define Device/yyets_le1
1126 $(call Device/FitzImage)
1127 DEVICE_VENDOR := YYeTs
1130 KERNEL_SIZE := 4096k
1131 IMAGE_SIZE := 31232k
1132 IMAGES += factory.bin
1133 IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
1134 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1135 DEVICE_PACKAGES := ipq-wifi-yyets_le1 kmod-usb-ledtrig-usbport
1137 TARGET_DEVICES += yyets_le1
1139 define Device/zte_mf18a
1140 $(call Device/FitImage)
1141 DEVICE_VENDOR := ZTE
1142 DEVICE_MODEL := MF18A
1144 DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
1148 DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
1150 TARGET_DEVICES += zte_mf18a
1152 define Device/zte_mf28x_common
1153 $(call Device/FitzImage)
1154 DEVICE_VENDOR := ZTE
1156 DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
1160 DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1163 define Device/zte_mf286d
1164 $(call Device/zte_mf28x_common)
1165 DEVICE_MODEL := MF286D
1167 TARGET_DEVICES += zte_mf286d
1169 define Device/zte_mf287_common
1170 $(call Device/zte_mf28x_common)
1171 DEVICE_PACKAGES += ipq-wifi-zte_mf287plus
1173 # The recovery image is used to return back to stock (an initramfs-based image
1174 # that can be flashed to the device via sysupgrade
1175 # The factory image is used to install from the stock firmware by using an
1176 # exploit for the web interface
1177 IMAGES += factory.bin recovery.bin
1178 IMAGE/factory.bin := append-ubi
1179 IMAGE/recovery.bin := append-squashfs4-fakeroot | sysupgrade-tar kernel=$$$$(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE) rootfs=$$$$@ | append-metadata
1182 define Device/zte_mf287plus
1183 $(call Device/zte_mf287_common)
1184 DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
1185 DEVICE_MODEL := MF287Plus
1186 DEVICE_ALT0_VENDOR := ZTE
1187 DEVICE_ALT0_MODEL := MF287
1189 TARGET_DEVICES += zte_mf287plus
1191 define Device/zte_mf287pro
1192 $(call Device/zte_mf287_common)
1193 DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
1194 DEVICE_MODEL := MF287Pro
1196 TARGET_DEVICES += zte_mf287pro
1198 define Device/zte_mf289f
1199 $(call Device/zte_mf28x_common)
1200 DEVICE_MODEL := MF289F
1201 DEVICE_PACKAGES += ipq-wifi-zte_mf289f ath10k-firmware-qca9984-ct
1203 TARGET_DEVICES += zte_mf289f
1205 define Device/zyxel_nbg6617
1206 $(call Device/FitImageLzma)
1207 DEVICE_VENDOR := ZyXEL
1208 DEVICE_MODEL := NBG6617
1210 KERNEL_SIZE := 4096k
1211 ROOTFS_SIZE := 24960k
1212 RAS_BOARD := NBG6617
1213 RAS_ROOTFS_SIZE := 19840k
1214 RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
1215 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1216 IMAGES += factory.bin
1217 # The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
1218 # at least as large as the one of the initial firmware image (not the current
1219 # one on the device). This only applies to the Web-UI, the bootlaoder ignores
1220 # this minimum-size. However, the larger image can be flashed both ways.
1221 IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
1222 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
1223 DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
1225 TARGET_DEVICES += zyxel_nbg6617
1227 define Device/zyxel_wre6606
1228 $(call Device/FitImage)
1229 DEVICE_VENDOR := ZyXEL
1230 DEVICE_MODEL := WRE6606
1231 DEVICE_DTS_CONFIG := config@4
1233 IMAGE_SIZE := 13184k
1234 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
1235 DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
1238 #TARGET_DEVICES += zyxel_wre6606