2 DEVICE_VARS
+= NETGEAR_BOARD_ID NETGEAR_HW_ID
3 DEVICE_VARS
+= RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
4 DEVICE_VARS
+= WRGG_DEVNAME WRGG_SIGNATURE
7 KERNEL_SUFFIX
:= -uImage.itb
8 KERNEL
= kernel-bin | gzip | fit gzip
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb
12 define Device
/FitImageLzma
13 KERNEL_SUFFIX
:= -uImage.itb
14 KERNEL
= kernel-bin | lzma | fit lzma
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb
18 define Device
/FitzImage
19 KERNEL_SUFFIX
:= -zImage.itb
20 KERNEL
= kernel-bin | fit none
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb
26 IMAGES
:= factory.ubi sysupgrade.bin
27 IMAGE
/factory.ubi
:= append-ubi
28 IMAGE
/sysupgrade.bin
:= sysupgrade-tar | append-metadata
31 define Device
/DniImage
32 $(call Device
/FitzImage
)
36 IMAGE
/factory.img
:= append-kernel | pad-offset
64k
64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
37 IMAGE
/sysupgrade.bin
:= append-kernel | pad-offset
64k
64 | append-uImage-fakehdr filesystem | \
38 append-rootfs | pad-rootfs | check-size | append-metadata
41 define Build
/append-rootfshdr
42 mkimage
-A
$(LINUX_KARCH
) \
43 -O linux
-T filesystem \
44 -C lzma
-a
$(KERNEL_LOADADDR
) -e
$(if
$(KERNEL_ENTRY
),$(KERNEL_ENTRY
),$(KERNEL_LOADADDR
)) \
45 -n root.squashfs
-d
$(IMAGE_ROOTFS
) $@.new
46 cat
$(IMAGE_KERNEL
) > $@.
$1
47 dd if
=$@.new bs
=64 count
=1 >> $@.
$1
50 define Build
/append-rutx-metadata
53 "device_code": [".*"], \
57 "supported_devices":["teltonika,rutx"] \
61 define Build
/copy-file
65 define Build
/mkmylofw_32m
66 $(eval device_id
=$(word 1,$(1)))
67 $(eval revision
=$(word 2,$(1)))
70 size
="$$(stat -c%s $@)" \
71 pad
="$(subst k,* 1024,$(BLOCKSIZE))" \
72 pad
="(pad - (size % pad)) % pad" \
73 newsize
='size + pad'; \
74 $(STAGING_DIR_HOST
)/bin
/mkmylofw \
75 -B WPE72
-i
0x11f6:$(device_id
):0x11f6:$(device_id
) -r
$(revision
) \
76 -s
0x2000000 -p0x180000
:$$newsize:al
:0x80208000:"OpenWrt":$@ \
81 define Build
/wac5xx-netgear-tar
83 mv
$@
$@.tmp
/wac5xx-ubifs-root.img
84 md5sum
$@.tmp
/wac5xx-ubifs-root.img
> $@.tmp
/wac5xx-ubifs-root.md5sum
85 echo
"WAC505 WAC510" > $@.tmp
/metadata.txt
86 echo
"WAC505_V9.9.9.9" > $@.tmp
/version
87 tar -C
$@.tmp
/ -cf
$@ .
91 define Build
/qsdk-ipq-factory-nand-askey
92 $(TOPDIR
)/scripts
/mkits-qsdk-ipq-image.sh
$@.its\
94 askey_fs
$(IMAGE_ROOTFS
) \
96 PATH
=$(LINUX_DIR
)/scripts
/dtc
:$(PATH
) mkimage
-f
$@.its
$@.new
100 define Build
/qsdk-ipq-app-gpt
101 cp
$@
$@.tmp
2>/dev
/null || true
102 ptgen
-g
-o
$@.tmp
-a
1 -l
1024 \
103 -t
0x2e -N
0:HLOS
-r
-p
32M \
104 -t
0x83 -N rootfs
-r
-p
128M \
105 -N rootfs_data
-p
512M
111 -$(STAGING_DIR_HOST
)/bin
/mksenaofw \
112 -n
$(BOARD_NAME
) -r
$(VENDOR_ID
) -p
$(1) \
113 -c
$(DATECODE
) -w
$(2) -x
$(CW_VER
) -t
0 \
119 define Build
/wrgg-image
122 -d
"$(WRGG_DEVNAME)" \
123 -s
"$(WRGG_SIGNATURE)" \
128 define Device
/8dev_habanero-dvk
129 $(call Device
/FitImageLzma
)
130 DEVICE_VENDOR
:= 8devices
131 DEVICE_MODEL
:= Habanero DVK
134 IMAGE
/sysupgrade.bin
:= append-kernel | pad-to
64k | append-rootfs | pad-rootfs | check-size | append-metadata
136 TARGET_DEVICES
+= 8dev_habanero-dvk
138 define Device
/8dev_jalapeno-common
139 $(call Device
/FitImage
)
140 $(call Device
/UbiFit
)
146 define Device
/8dev_jalapeno
147 $(call Device
/8dev_jalapeno-common
)
148 DEVICE_VENDOR
:= 8devices
149 DEVICE_MODEL
:= Jalapeno
151 TARGET_DEVICES
+= 8dev_jalapeno
153 define Device
/alfa-network_ap120c-ac
154 $(call Device
/FitImage
)
155 $(call Device
/UbiFit
)
156 DEVICE_VENDOR
:= ALFA Network
157 DEVICE_MODEL
:= AP120C-AC
159 DEVICE_PACKAGES
:= kmod-usb-acm kmod-tpm-i2c-atmel
163 IMAGES
:= factory.bin sysupgrade.bin
164 IMAGE
/factory.bin
:= append-ubi | qsdk-ipq-factory-nand
166 TARGET_DEVICES
+= alfa-network_ap120c-ac
168 define Device
/aruba_glenmorangie
169 $(call Device
/FitImageLzma
)
170 DEVICE_VENDOR
:= Aruba
174 define Device
/aruba_ap-303
175 $(call Device
/aruba_glenmorangie
)
176 DEVICE_MODEL
:= AP-303
178 TARGET_DEVICES
+= aruba_ap-303
180 define Device
/aruba_ap-303h
181 $(call Device
/aruba_glenmorangie
)
182 DEVICE_MODEL
:= AP-303H
184 TARGET_DEVICES
+= aruba_ap-303h
186 define Device
/aruba_ap-365
187 $(call Device
/aruba_glenmorangie
)
188 DEVICE_MODEL
:= AP-365
189 DEVICE_PACKAGES
:= kmod-hwmon-ad7418
191 TARGET_DEVICES
+= aruba_ap-365
193 define Device
/asus_map-ac2200
194 $(call Device
/FitImageLzma
)
195 DEVICE_VENDOR
:= ASUS
196 DEVICE_MODEL
:= Lyra
(MAP-AC2200
)
198 DEVICE_PACKAGES
:= ath10k-firmware-qca9888-ct kmod-ath3k
200 TARGET_DEVICES
+= asus_map-ac2200
202 # WARNING: this is an initramfs image that gets you half of the way there
203 # you need to delete the jffs2 ubi volume and sysupgrade to the final image
204 # to get a "trx" you can flash via web UI for ac42u/ac58u:
205 # - change call Device/FitImageLzma to Device/FitImage
206 # - add the following below UIMAGE_NAME
207 # UIMAGE_MAGIC := 0x27051956
208 # IMAGES += factory.trx
209 # IMAGE/factory.trx := copy-file $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE) | uImage none
210 define Device
/asus_rt-ac42u
211 $(call Device
/FitImageLzma
)
212 DEVICE_VENDOR
:= ASUS
213 DEVICE_MODEL
:= RT-AC42U
214 DEVICE_ALT0_VENDOR
:= ASUS
215 DEVICE_ALT0_MODEL
:= RT-ACRH17
216 DEVICE_ALT1_VENDOR
:= ASUS
217 DEVICE_ALT1_MODEL
:= RT-AC2200
221 IMAGE_SIZE
:= 20439364
222 FILESYSTEMS
:= squashfs
223 # RT-AC82U is nowhere to be found online
224 # Rather, this device is a/k/a RT-AC42U
225 # But we'll go with what the vendor firmware has...
226 UIMAGE_NAME
:=$(shell echo
-e
'\03\01\01\01RT-AC82U')
227 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct kmod-usb-ledtrig-usbport
229 TARGET_DEVICES
+= asus_rt-ac42u
231 define Device
/asus_rt-ac58u
232 $(call Device
/FitImageLzma
)
233 DEVICE_VENDOR
:= ASUS
234 DEVICE_MODEL
:= RT-AC58U
235 DEVICE_ALT0_VENDOR
:= ASUS
236 DEVICE_ALT0_MODEL
:= RT-ACRH13
240 IMAGE_SIZE
:= 20439364
241 FILESYSTEMS
:= squashfs
242 # Someone - in their infinite wisdom - decided to put the firmware
243 # version in front of the image name \03\00\00\04 => Version 3.0.0.4
244 # Since u-boot works with strings we either need another fixup step
245 # to add a version... or we are very careful not to add '\0' into that
246 # string and call it a day.... Yeah, we do the latter!
247 UIMAGE_NAME
:=$(shell echo
-e
'\03\01\01\01RT-AC58U')
248 DEVICE_PACKAGES
:= -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
249 kmod-usb-ledtrig-usbport
251 TARGET_DEVICES
+= asus_rt-ac58u
253 define Device
/avm_fritzbox-4040
254 $(call Device
/FitImageLzma
)
256 DEVICE_MODEL
:= FRITZ
!Box
4040
258 BOARD_NAME
:= fritz4040
260 UBOOT_PATH
:= $(STAGING_DIR_IMAGE
)/uboot-fritz4040.bin
261 UBOOT_PARTITION_SIZE
:= 524288
263 IMAGE
/eva.bin
:= append-uboot | pad-to
$$$$(UBOOT_PARTITION_SIZE
) | append-kernel | append-rootfs | pad-rootfs
264 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
265 DEVICE_PACKAGES
:= fritz-tffs fritz-caldata
267 TARGET_DEVICES
+= avm_fritzbox-4040
269 define Device
/avm_fritzbox-7530
270 $(call Device
/FitImageLzma
)
272 DEVICE_MODEL
:= FRITZ
!Box
7530
273 DEVICE_ALT0_VENDOR
:= AVM
274 DEVICE_ALT0_MODEL
:= FRITZ
!Box
7520
276 DEVICE_PACKAGES
:= fritz-caldata fritz-tffs-nand ltq-vdsl-vr11-app
278 TARGET_DEVICES
+= avm_fritzbox-7530
280 define Device
/avm_fritzrepeater-1200
281 $(call Device
/FitImageLzma
)
283 DEVICE_MODEL
:= FRITZ
!Repeater
1200
285 DEVICE_PACKAGES
:= fritz-caldata fritz-tffs-nand
287 TARGET_DEVICES
+= avm_fritzrepeater-1200
289 define Device
/avm_fritzrepeater-3000
290 $(call Device
/FitImageLzma
)
292 DEVICE_MODEL
:= FRITZ
!Repeater
3000
294 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
296 TARGET_DEVICES
+= avm_fritzrepeater-3000
298 define Device
/buffalo_wtr-m2133hp
299 $(call Device
/FitImage
)
300 $(call Device
/UbiFit
)
301 DEVICE_VENDOR
:= Buffalo
302 DEVICE_MODEL
:= WTR-M2133HP
304 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct
308 TARGET_DEVICES
+= buffalo_wtr-m2133hp
310 define Device
/cellc_rtl30vw
311 KERNEL_SUFFIX
:= -zImage.itb
312 KERNEL_INITRAMFS
= kernel-bin | gzip | fit gzip
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb
313 KERNEL
= kernel-bin | fit none
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb | uImage lzma | pad-to
2048
314 KERNEL_NAME
:= zImage
316 IMAGES
:= factory.bin sysupgrade.bin
317 IMAGE
/factory.bin
:= append-rootfshdr kernel | append-ubi | qsdk-ipq-factory-nand-askey kernel
318 IMAGE
/sysupgrade.bin
:= append-rootfshdr kernel | sysupgrade-tar kernel
=$$$$@.kernel | append-metadata
319 DEVICE_VENDOR
:= Cell C
320 DEVICE_MODEL
:= RTL30VW
322 DEVICE_DTS_CONFIG
:= config@
5
328 DEVICE_PACKAGES
:= kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
330 TARGET_DEVICES
+= cellc_rtl30vw
332 define Device
/cilab_meshpoint-one
333 $(call Device
/8dev_jalapeno-common
)
334 DEVICE_VENDOR
:= Crisis Innovation Lab
335 DEVICE_MODEL
:= MeshPoint.One
336 DEVICE_PACKAGES
+= kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
339 #TARGET_DEVICES += cilab_meshpoint-one
341 define Device
/compex_wpj419
342 $(call Device
/FitImage
)
343 $(call Device
/UbiFit
)
344 DEVICE_VENDOR
:= Compex
345 DEVICE_MODEL
:= WPJ419
347 DEVICE_DTS_CONFIG
:= config@
12
351 FILESYSTEMS
:= squashfs
354 #TARGET_DEVICES += compex_wpj419
356 define Device
/compex_wpj428
357 $(call Device
/FitImage
)
358 DEVICE_VENDOR
:= Compex
359 DEVICE_MODEL
:= WPJ428
361 DEVICE_DTS_CONFIG
:= config@
4
365 IMAGES
+= cpximg-6a04.bin
366 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
367 IMAGE
/cpximg-6a04.bin
:= append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m
0x8A2 3
368 DEVICE_PACKAGES
:= kmod-gpio-beeper
371 TARGET_DEVICES
+= compex_wpj428
373 define Device
/devolo_magic-2-wifi-next
374 $(call Device
/FitImage
)
375 DEVICE_VENDOR
:= devolo
376 DEVICE_MODEL
:= Magic
2 WiFi next
380 # If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
381 # it will bootm it, just like we want for the initramfs.
382 KERNEL_INITRAMFS
:= kernel-bin | gzip | fit gzip
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb | pad-to
64k |\
383 append-string
-e
'\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
386 IMAGES
:= sysupgrade.bin
387 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
391 #TARGET_DEVICES += devolo_magic-2-wifi-next
393 define Device
/dlink_dap-2610
394 $(call Device
/FitImageLzma
)
395 DEVICE_VENDOR
:= D-Link
396 DEVICE_MODEL
:= DAP-2610
398 DEVICE_DTS_CONFIG
:= config@ap.dk01.1
-c1
400 WRGG_DEVNAME
:= /dev
/mtdblock
/8
401 WRGG_SIGNATURE
:= wapac30_dkbs_dap2610
403 IMAGES
+= factory.bin
404 # Bootloader expects a special 160 byte header which is added by
406 # Factory image size must be larger than 6MB, and size in wrgg header must
407 # match actual factory image size to be flashable from D-Link http server.
408 # Bootloader verifies checksum of wrgg image before booting, thus jffs2
409 # cannot be part of the wrgg image. This is solved in the factory image by
410 # having the rootfs at the end of the image (without pad-rootfs). And in
411 # the sysupgrade image only the kernel is included in the wrgg checksum,
412 # but this is not flashable from the D-link http server.
413 # append-rootfs must start on an erase block boundary.
414 IMAGE
/factory.bin
:= append-kernel | pad-offset
6144k
160 | append-rootfs | wrgg-image | check-size
415 IMAGE
/sysupgrade.bin
:= append-kernel | wrgg-image | pad-to
$$$$(BLOCKSIZE
) | append-rootfs | pad-rootfs | check-size | append-metadata
417 TARGET_DEVICES
+= dlink_dap-2610
419 define Device
/edgecore_ecw5211
420 $(call Device
/FitImage
)
421 $(call Device
/UbiFit
)
422 DEVICE_VENDOR
:= Edgecore
423 DEVICE_MODEL
:= ECW5211
427 DEVICE_DTS_CONFIG
:= config@ap.dk01.1
-c2
428 DEVICE_PACKAGES
:= kmod-tpm-i2c-atmel kmod-usb-acm
430 TARGET_DEVICES
+= edgecore_ecw5211
432 define Device
/edgecore_oap100
433 $(call Device
/FitImage
)
434 $(call Device
/UbiFit
)
435 DEVICE_VENDOR
:= Edgecore
436 DEVICE_MODEL
:= OAP100
440 IMAGES
:= sysupgrade.bin
441 DEVICE_DTS_CONFIG
:= config@ap.dk07.1
-c1
442 DEVICE_PACKAGES
:= kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
445 #TARGET_DEVICES += edgecore_oap100
447 define Device
/engenius_eap1300
448 $(call Device
/FitImage
)
449 DEVICE_VENDOR
:= EnGenius
450 DEVICE_MODEL
:= EAP1300
451 DEVICE_DTS_CONFIG
:= config@
4
452 BOARD_NAME
:= eap1300
456 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
459 #TARGET_DEVICES += engenius_eap1300
461 define Device
/engenius_eap2200
462 $(call Device
/FitImage
)
463 $(call Device
/UbiFit
)
464 DEVICE_VENDOR
:= EnGenius
465 DEVICE_MODEL
:= EAP2200
469 DEVICE_PACKAGES
:= ath10k-firmware-qca9888-ct
-kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
472 #TARGET_DEVICES += engenius_eap2200
474 define Device
/engenius_emd1
475 $(call Device
/FitImage
)
476 DEVICE_VENDOR
:= EnGenius
478 DEVICE_DTS_CONFIG
:= config@
4
481 IMAGES
+= factory.bin
482 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
483 IMAGE
/factory.bin
:= qsdk-ipq-factory-nor | check-size
486 #TARGET_DEVICES += engenius_emd1
488 define Device
/engenius_emr3500
489 $(call Device
/FitImage
)
490 DEVICE_VENDOR
:= EnGenius
491 DEVICE_MODEL
:= EMR3500
492 DEVICE_DTS_CONFIG
:= config@
4
496 IMAGES
+= factory.bin
497 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
498 IMAGE
/factory.bin
:= qsdk-ipq-factory-nor | check-size
502 #TARGET_DEVICES += engenius_emr3500
504 define Device
/engenius_ens620ext
505 $(call Device
/FitImage
)
506 DEVICE_VENDOR
:= EnGenius
507 DEVICE_MODEL
:= ENS620EXT
509 DEVICE_DTS_CONFIG
:= config@
4
512 BOARD_NAME
:= ENS620EXT
515 PRODUCT_ID_NEW
:= 0xA4
522 FILESYSTEMS
:= squashfs
523 IMAGES
+= factory_30.bin factory_35.bin
524 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
525 IMAGE
/factory_30.bin
:= append-kernel | pad-to
$$$$(KERNEL_SIZE
) | append-rootfs | pad-rootfs | check-size | SenaoFW
$$$$(PRODUCT_ID
) $$$$(FW_VER
)
526 IMAGE
/factory_35.bin
:= qsdk-ipq-factory-nor | check-size | SenaoFW
$$$$(PRODUCT_ID_NEW
) $$$$(FW_VER_NEW
)
529 #TARGET_DEVICES += engenius_ens620ext
531 define Device
/extreme-networks_ws-ap3915i
532 $(call Device
/FitImage
)
533 DEVICE_VENDOR
:= Extreme Networks
534 DEVICE_MODEL
:= WS-AP3915i
538 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
540 TARGET_DEVICES
+= extreme-networks_ws-ap3915i
542 define Device
/ezviz_cs-w3-wd1200g-eup
543 $(call Device
/FitImage
)
544 DEVICE_VENDOR
:= EZVIZ
545 DEVICE_MODEL
:= CS-W3-WD1200G
546 DEVICE_VARIANT
:= EUP
550 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | \
552 DEVICE_PACKAGES
:= -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
553 DEVICE_COMPAT_VERSION
:= 2.0
554 DEVICE_COMPAT_MESSAGE
:= uboot
's bootcmd has to be updated (see wiki). \
555 Upgrade via sysupgrade mechanism is not possible.
557 TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
559 define Device/glinet_gl-a1300
560 $(call Device/FitImage)
561 $(call Device/UbiFit)
562 DEVICE_VENDOR := GL.iNet
563 DEVICE_MODEL := GL-A1300
565 DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
568 IMAGE_SIZE := 131072k
570 TARGET_DEVICES += glinet_gl-a1300
572 define Device/glinet_gl-ap1300
573 $(call Device/FitImage)
574 $(call Device/UbiFit)
575 DEVICE_VENDOR := GL.iNet
576 DEVICE_MODEL := GL-AP1300
578 DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
581 IMAGE_SIZE := 131072k
583 DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
585 TARGET_DEVICES += glinet_gl-ap1300
587 define Device/glinet_gl-b1300
588 $(call Device/FitzImage)
589 DEVICE_VENDOR := GL.iNet
590 DEVICE_MODEL := GL-B1300
591 BOARD_NAME := gl-b1300
595 IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
597 TARGET_DEVICES += glinet_gl-b1300
599 define Device/glinet_gl-b2200
600 $(call Device/FitzImage)
601 DEVICE_VENDOR := GL.iNet
602 DEVICE_MODEL := GL-B2200
604 DEVICE_DTS_CONFIG := config@ap.dk04.1-c3
605 KERNEL_INITRAMFS_SUFFIX := -recovery.itb
606 IMAGES := emmc.img.gz sysupgrade.bin
607 IMAGE/emmc.img.gz := qsdk-ipq-app-gpt |\
608 pad-to 1024k | append-kernel |\
609 pad-to 33792k | append-rootfs |\
610 append-metadata | gzip
611 IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
612 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct \
613 kmod-fs-ext4 kmod-mmc kmod-spi-dev mkf2fs e2fsprogs kmod-fs-f2fs
615 TARGET_DEVICES += glinet_gl-b2200
617 define Device/glinet_gl-s1300
618 $(call Device/FitzImage)
619 DEVICE_VENDOR := GL.iNet
620 DEVICE_MODEL := GL-S1300
624 IMAGES := sysupgrade.bin
625 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
626 DEVICE_PACKAGES := kmod-fs-ext4 kmod-mmc kmod-spi-dev
629 #TARGET_DEVICES += glinet_gl-s1300
631 define Device/kernel-size-6350-8300
632 DEVICE_COMPAT_VERSION := 2.0
633 DEVICE_COMPAT_MESSAGE := Kernel partition size must be increased for \
634 this OpenWrt version. Before continuing, you MUST issue either the \
635 command "fw_setenv kernsize 500000" from the OpenWrt command line, \
636 or "setenv kernsize 500000 ; saveenv" from the U-Boot serial console. \
637 Instead of the sysupgrade image, you must then install the OpenWrt \
638 factory image, setting the force flag and wiping the configuration. \
639 (e.g. "sysupgrade -n -F openwrt-squashfs-factory.bin" on command line)
642 define Device/linksys_ea6350v3
643 # The Linksys EA6350v3 has a uboot bootloader that does not
644 # support either booting lzma kernel images nor booting UBI
645 # partitions. This uboot, however, supports raw kernel images and
648 # As configured by the OEM factory, the device will boot the kernel
649 # from a fixed address with a fixed length of 3 MiB. Also, the
650 # device has a hard-coded kernel command line that requires the
651 # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
652 # Oh... and the kernel partition overlaps with the rootfs
653 # partition (the same for alt_kernel and alt_rootfs).
655 # If you are planing re-partitioning the device, you may want to
656 # keep these details in mind:
657 # 1. The kernel addresses you should honor are 0x00000000 and
658 # 0x02800000 respectively.
659 # 2. The kernel size (plus the dtb) cannot exceed 3 MiB in size
660 # unless the uboot environment variable "kernsize" is increased.
661 # 3. You can use 'zImage
', but not a raw 'Image
' packed with lzma.
662 # 4. The kernel command line from uboot is harcoded to boot with
663 # rootfs either in mtd11 or mtd13.
664 $(call Device/FitzImage)
665 $(call Device/kernel-size-6350-8300)
666 DEVICE_VENDOR := Linksys
667 DEVICE_MODEL := EA6350
675 IMAGES += factory.bin
676 IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
678 TARGET_DEVICES += linksys_ea6350v3
680 define Device/linksys_ea8300
681 $(call Device/FitzImage)
682 $(call Device/kernel-size-6350-8300)
683 DEVICE_VENDOR := Linksys
684 DEVICE_MODEL := EA8300
690 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
691 IMAGES += factory.bin
692 IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
693 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
695 TARGET_DEVICES += linksys_ea8300
697 define Device/linksys_mr8300
698 $(call Device/FitzImage)
699 $(call Device/kernel-size-6350-8300)
700 DEVICE_VENDOR := Linksys
701 DEVICE_MODEL := MR8300
707 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
708 IMAGES += factory.bin
709 IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
710 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
712 TARGET_DEVICES += linksys_mr8300
714 define Device/linksys_whw03v2
715 $(call Device/FitzImage)
716 DEVICE_VENDOR := Linksys
717 DEVICE_MODEL := WHW03
721 IMAGE_SIZE := 158720k
724 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
725 IMAGES += factory.bin
726 IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW03v2
727 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-leds-pca963x kmod-spi-dev kmod-bluetooth
729 TARGET_DEVICES += linksys_whw03v2
731 define Device/linksys_whw01
732 $(call Device/FitzImage)
733 DEVICE_VENDOR := Linksys
734 DEVICE_MODEL := WHW01
740 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
741 IMAGES += factory.bin
742 IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW01
743 DEVICE_PACKAGES := uboot-envtools kmod-leds-pca963x
745 TARGET_DEVICES += linksys_whw01
747 define Device/luma_wrtq-329acn
748 $(call Device/FitImage)
749 DEVICE_VENDOR := Luma Home
750 DEVICE_MODEL := WRTQ-329ACN
752 DEVICE_PACKAGES := kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio
757 TARGET_DEVICES += luma_wrtq-329acn
759 define Device/meraki_common
760 $(call Device/FitImage)
761 DEVICE_VENDOR := Cisco Meraki
765 DEVICE_PACKAGES := ath10k-firmware-qca9887-ct
768 define Device/meraki_mr33
769 $(call Device/meraki_common)
773 TARGET_DEVICES += meraki_mr33
775 define Device/meraki_mr74
776 $(call Device/meraki_common)
778 DEVICE_DTS_CONFIG := config@3
781 TARGET_DEVICES += meraki_mr74
783 define Device/mobipromo_cm520-79f
784 $(call Device/FitzImage)
785 $(call Device/UbiFit)
786 DEVICE_VENDOR := MobiPromo
787 DEVICE_MODEL := CM520-79F
791 DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
793 TARGET_DEVICES += mobipromo_cm520-79f
795 define Device/netgear_ex61x0v2
796 $(call Device/DniImage)
797 DEVICE_VENDOR := NETGEAR
798 DEVICE_DTS_CONFIG := config@4
799 NETGEAR_BOARD_ID := EX6150v2series
800 NETGEAR_HW_ID := 29765285+16+0+128+2x2
805 define Device/netgear_ex6100v2
806 $(call Device/netgear_ex61x0v2)
807 DEVICE_MODEL := EX6100
810 TARGET_DEVICES += netgear_ex6100v2
812 define Device/netgear_ex6150v2
813 $(call Device/netgear_ex61x0v2)
814 DEVICE_MODEL := EX6150
817 TARGET_DEVICES += netgear_ex6150v2
819 define Device/netgear_orbi
820 $(call Device/DniImage)
822 DEVICE_VENDOR := NETGEAR
823 IMAGE/factory.img := append-kernel | pad-offset 128k 64 | \
824 append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | \
825 append-rootfs | pad-rootfs | netgear-dni
826 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | \
827 sysupgrade-tar rootfs=$$$$@ | append-metadata
828 DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
831 define Device/netgear_rbx50
832 $(call Device/netgear_orbi)
833 NETGEAR_HW_ID := 29765352+0+4000+512+2x2+2x2+4x4
834 KERNEL_SIZE := 3932160
835 ROOTFS_SIZE := 32243712
836 IMAGE_SIZE := 36175872
839 define Device/netgear_rbr50
840 $(call Device/netgear_rbx50)
841 DEVICE_MODEL := RBR50
843 NETGEAR_BOARD_ID := RBR50
845 TARGET_DEVICES += netgear_rbr50
847 define Device/netgear_rbs50
848 $(call Device/netgear_rbx50)
849 DEVICE_MODEL := RBS50
851 NETGEAR_BOARD_ID := RBS50
853 TARGET_DEVICES += netgear_rbs50
855 define Device/netgear_srx60
856 $(call Device/netgear_orbi)
857 NETGEAR_HW_ID := 29765352+0+4096+512+2x2+2x2+4x4
858 KERNEL_SIZE := 3932160
859 ROOTFS_SIZE := 32243712
860 IMAGE_SIZE := 36175872
863 define Device/netgear_srr60
864 $(call Device/netgear_srx60)
865 DEVICE_MODEL := SRR60
866 NETGEAR_BOARD_ID := SRR60
868 TARGET_DEVICES += netgear_srr60
870 define Device/netgear_srs60
871 $(call Device/netgear_srx60)
872 DEVICE_MODEL := SRS60
873 NETGEAR_BOARD_ID := SRS60
875 TARGET_DEVICES += netgear_srs60
877 define Device/netgear_wac510
878 $(call Device/FitImage)
879 $(call Device/UbiFit)
880 DEVICE_VENDOR := Netgear
881 DEVICE_MODEL := WAC510
883 DEVICE_DTS_CONFIG := config@5
886 IMAGES += factory.tar
887 IMAGE/factory.tar := append-ubi | wac5xx-netgear-tar
888 DEVICE_PACKAGES := uboot-envtools
890 TARGET_DEVICES += netgear_wac510
892 define Device/openmesh_a42
893 $(call Device/FitImageLzma)
894 DEVICE_VENDOR := OpenMesh
897 DEVICE_DTS_CONFIG := config@om.a42
899 KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
901 IMAGES += factory.bin
902 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
903 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
905 TARGET_DEVICES += openmesh_a42
907 define Device/openmesh_a62
908 $(call Device/FitImageLzma)
909 DEVICE_VENDOR := OpenMesh
912 DEVICE_DTS_CONFIG := config@om.a62
914 KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
916 IMAGES += factory.bin
917 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
918 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
919 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
921 TARGET_DEVICES += openmesh_a62
923 define Device/p2w_r619ac
924 $(call Device/FitzImage)
925 $(call Device/UbiFit)
927 DEVICE_MODEL := R619AC
929 DEVICE_DTS_CONFIG := config@10
934 define Device/p2w_r619ac-64m
935 $(call Device/p2w_r619ac)
936 DEVICE_VARIANT := 64M NAND
937 IMAGES += factory.bin
938 IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
940 TARGET_DEVICES += p2w_r619ac-64m
942 define Device/p2w_r619ac-128m
943 $(call Device/p2w_r619ac)
944 DEVICE_VARIANT := 128M NAND
946 TARGET_DEVICES += p2w_r619ac-128m
948 define Device/pakedge_wr-1
949 $(call Device/FitImageLzma)
950 DEVICE_VENDOR := Pakedge
952 DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
956 IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | append-metadata
958 TARGET_DEVICES += pakedge_wr-1
960 define Device/plasmacloud_pa1200
961 $(call Device/FitImageLzma)
962 DEVICE_VENDOR := Plasma Cloud
963 DEVICE_MODEL := PA1200
965 DEVICE_DTS_CONFIG := config@pc.pa1200
967 KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
969 IMAGES += factory.bin
970 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
971 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
973 TARGET_DEVICES += plasmacloud_pa1200
975 define Device/plasmacloud_pa2200
976 $(call Device/FitImageLzma)
977 DEVICE_VENDOR := Plasma Cloud
978 DEVICE_MODEL := PA2200
980 DEVICE_DTS_CONFIG := config@pc.pa2200
982 KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
984 IMAGES += factory.bin
985 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
986 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
987 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
989 TARGET_DEVICES += plasmacloud_pa2200
991 define Device/qcom_ap-dk01.1-c1
992 DEVICE_VENDOR := Qualcomm Atheros
993 DEVICE_MODEL := AP-DK01.1
995 BOARD_NAME := ap-dk01.1-c1
997 DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
1000 IMAGE_SIZE := 26624k
1001 $(call Device/FitImage)
1002 IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
1005 TARGET_DEVICES += qcom_ap-dk01.1-c1
1007 define Device/qcom_ap-dk04.1-c1
1008 $(call Device/FitImage)
1009 $(call Device/UbiFit)
1010 DEVICE_VENDOR := Qualcomm Atheros
1011 DEVICE_MODEL := AP-DK04.1
1012 DEVICE_VARIANT := C1
1014 DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
1016 KERNEL_SIZE := 4048k
1019 BOARD_NAME := ap-dk04.1-c1
1022 TARGET_DEVICES += qcom_ap-dk04.1-c1
1024 define Device/qxwlan_e2600ac-c1
1025 $(call Device/FitImage)
1026 DEVICE_VENDOR := Qxwlan
1027 DEVICE_MODEL := E2600AC
1028 DEVICE_VARIANT := C1
1029 BOARD_NAME := e2600ac-c1
1031 IMAGE_SIZE := 31232k
1032 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1034 TARGET_DEVICES += qxwlan_e2600ac-c1
1036 define Device/qxwlan_e2600ac-c2
1037 $(call Device/FitImage)
1038 $(call Device/UbiFit)
1039 DEVICE_VENDOR := Qxwlan
1040 DEVICE_MODEL := E2600AC
1041 DEVICE_VARIANT := C2
1047 TARGET_DEVICES += qxwlan_e2600ac-c2
1049 define Device/sony_ncp-hg100-cellular
1050 $(call Device/FitImage)
1051 DEVICE_VENDOR := Sony
1052 DEVICE_MODEL := NCP-HG100/Cellular
1053 DEVICE_DTS_CONFIG := config@ap.dk04.1-c4
1055 KERNEL_SIZE := 8192k
1057 DEVICE_PACKAGES := e2fsprogs kmod-fs-ext4 uqmi
1059 TARGET_DEVICES += sony_ncp-hg100-cellular
1061 define Device/teltonika_rutx10
1062 $(call Device/FitImage)
1063 $(call Device/UbiFit)
1064 DEVICE_VENDOR := Teltonika
1065 DEVICE_MODEL := RUTX10
1067 DEVICE_DTS_CONFIG := config@5
1071 FILESYSTEMS := squashfs
1072 IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
1073 DEVICE_PACKAGES := kmod-bluetooth
1076 #TARGET_DEVICES += teltonika_rutx10
1078 define Device/teltonika_rutx50
1079 $(call Device/FitImage)
1080 $(call Device/UbiFit)
1081 DEVICE_VENDOR := Teltonika
1082 DEVICE_MODEL := RUTX50
1084 DEVICE_DTS_CONFIG := config@5
1088 FILESYSTEMS := squashfs
1089 IMAGE/factory.ubi := append-ubi
1090 DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1092 TARGET_DEVICES += teltonika_rutx50
1094 define Device/tel_x1pro
1095 $(call Device/FitImage)
1096 DEVICE_VENDOR := Telco
1097 DEVICE_MODEL := X1 Pro
1099 KERNEL_SIZE := 4096k
1100 IMAGE_SIZE := 31232k
1101 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1102 DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1106 #TARGET_DEVICES += tel_x1pro
1108 define Device/unielec_u4019-32m
1109 $(call Device/FitImage)
1110 DEVICE_VENDOR := Unielec
1111 DEVICE_MODEL := U4019
1112 DEVICE_VARIANT := 32M
1113 BOARD_NAME := u4019-32m
1115 KERNEL_SIZE := 4096k
1116 IMAGE_SIZE := 31232k
1117 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1121 #TARGET_DEVICES += unielec_u4019-32m
1123 define Device/wallys_dr40x9
1124 $(call Device/FitImage)
1125 $(call Device/UbiFit)
1126 DEVICE_VENDOR := Wallys
1127 DEVICE_MODEL := DR40X9
1129 DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
1132 DEVICE_PACKAGES := ipq-wifi-wallys_dr40x9
1134 TARGET_DEVICES += wallys_dr40x9
1136 define Device/zte_mf18a
1137 $(call Device/FitImage)
1138 DEVICE_VENDOR := ZTE
1139 DEVICE_MODEL := MF18A
1141 DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
1145 DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
1147 TARGET_DEVICES += zte_mf18a
1149 define Device/zte_mf28x_common
1150 $(call Device/FitzImage)
1151 DEVICE_VENDOR := ZTE
1153 DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
1157 DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1160 define Device/zte_mf286d
1161 $(call Device/zte_mf28x_common)
1162 DEVICE_MODEL := MF286D
1164 TARGET_DEVICES += zte_mf286d
1166 define Device/zte_mf287plus
1167 $(call Device/zte_mf28x_common)
1168 DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
1169 DEVICE_MODEL := MF287Plus
1170 DEVICE_ALT0_VENDOR := ZTE
1171 DEVICE_ALT0_MODEL := MF287
1172 DEVICE_PACKAGES += ipq-wifi-zte_mf287plus
1174 # The recovery image is used to return back to stock (an initramfs-based image
1175 # that can be flashed to the device via sysupgrade
1176 # The factory image is used to install from the stock firmware by using an
1177 # exploit for the web interface
1178 IMAGES += factory.bin recovery.bin
1179 IMAGE/factory.bin := append-ubi
1180 IMAGE/recovery.bin := append-squashfs4-fakeroot | sysupgrade-tar kernel=$$$$(BIN_DIR)/openwrt-$$(BOARD)$$(if $$(SUBTARGET),-$$(SUBTARGET))-$$(DEVICE_NAME)-initramfs-zImage.itb rootfs=$$$$@ | append-metadata
1182 TARGET_DEVICES += zte_mf287plus
1184 define Device/zte_mf289f
1185 $(call Device/zte_mf28x_common)
1186 DEVICE_MODEL := MF289F
1187 DEVICE_PACKAGES += ipq-wifi-zte_mf289f ath10k-firmware-qca9984-ct
1189 TARGET_DEVICES += zte_mf289f
1191 define Device/zyxel_nbg6617
1192 $(call Device/FitImageLzma)
1193 DEVICE_VENDOR := ZyXEL
1194 DEVICE_MODEL := NBG6617
1196 KERNEL_SIZE := 4096k
1197 ROOTFS_SIZE := 24960k
1198 RAS_BOARD := NBG6617
1199 RAS_ROOTFS_SIZE := 19840k
1200 RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
1201 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1202 IMAGES += factory.bin
1203 # The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
1204 # at least as large as the one of the initial firmware image (not the current
1205 # one on the device). This only applies to the Web-UI, the bootlaoder ignores
1206 # this minimum-size. However, the larger image can be flashed both ways.
1207 IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
1208 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
1209 DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
1211 TARGET_DEVICES += zyxel_nbg6617
1213 define Device/zyxel_wre6606
1214 $(call Device/FitImage)
1215 DEVICE_VENDOR := ZyXEL
1216 DEVICE_MODEL := WRE6606
1217 DEVICE_DTS_CONFIG := config@4
1219 IMAGE_SIZE := 13184k
1220 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
1221 DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
1224 #TARGET_DEVICES += zyxel_wre6606