2 DEVICE_VARS
+= NETGEAR_BOARD_ID NETGEAR_HW_ID
3 DEVICE_VARS
+= RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
4 DEVICE_VARS
+= WRGG_DEVNAME WRGG_SIGNATURE
7 KERNEL_SUFFIX
:= -uImage.itb
8 KERNEL
= kernel-bin | gzip | fit gzip
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb
12 define Device
/FitImageLzma
13 KERNEL_SUFFIX
:= -uImage.itb
14 KERNEL
= kernel-bin | lzma | fit lzma
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb
18 define Device
/FitzImage
19 KERNEL_SUFFIX
:= -zImage.itb
20 KERNEL
= kernel-bin | fit none
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb
26 IMAGES
:= factory.ubi sysupgrade.bin
27 IMAGE
/factory.ubi
:= append-ubi
28 IMAGE
/sysupgrade.bin
:= sysupgrade-tar | append-metadata
31 define Device
/DniImage
32 $(call Device
/FitzImage
)
36 IMAGE
/factory.img
:= append-kernel | pad-offset
64k
64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
37 IMAGE
/sysupgrade.bin
:= append-kernel | pad-offset
64k
64 | append-uImage-fakehdr filesystem | \
38 append-rootfs | pad-rootfs | check-size | append-metadata
41 define Build
/append-rootfshdr
42 mkimage
-A
$(LINUX_KARCH
) \
43 -O linux
-T filesystem \
44 -C lzma
-a
$(KERNEL_LOADADDR
) -e
$(if
$(KERNEL_ENTRY
),$(KERNEL_ENTRY
),$(KERNEL_LOADADDR
)) \
45 -n root.squashfs
-d
$(IMAGE_ROOTFS
) $@.new
46 cat
$(IMAGE_KERNEL
) > $@.
$1
47 dd if
=$@.new bs
=64 count
=1 >> $@.
$1
50 define Build
/append-rutx-metadata
53 "device_code": [".*"], \
57 "supported_devices":["teltonika,rutx"] \
61 define Build
/copy-file
65 define Build
/mkmylofw_32m
66 $(eval device_id
=$(word 1,$(1)))
67 $(eval revision
=$(word 2,$(1)))
70 size
="$$(stat -c%s $@)" \
71 pad
="$(subst k,* 1024,$(BLOCKSIZE))" \
72 pad
="(pad - (size % pad)) % pad" \
73 newsize
='size + pad'; \
74 $(STAGING_DIR_HOST
)/bin
/mkmylofw \
75 -B WPE72
-i
0x11f6:$(device_id
):0x11f6:$(device_id
) -r
$(revision
) \
76 -s
0x2000000 -p0x180000
:$$newsize:al
:0x80208000:"OpenWrt":$@ \
81 define Build
/wac5xx-netgear-tar
83 mv
$@
$@.tmp
/wac5xx-ubifs-root.img
84 md5sum
$@.tmp
/wac5xx-ubifs-root.img
> $@.tmp
/wac5xx-ubifs-root.md5sum
85 echo
"WAC505 WAC510" > $@.tmp
/metadata.txt
86 echo
"WAC505_V9.9.9.9" > $@.tmp
/version
87 tar -C
$@.tmp
/ -cf
$@ .
91 define Build
/qsdk-ipq-factory-nand-askey
92 $(TOPDIR
)/scripts
/mkits-qsdk-ipq-image.sh
$@.its\
94 askey_fs
$(IMAGE_ROOTFS
) \
96 PATH
=$(LINUX_DIR
)/scripts
/dtc
:$(PATH
) mkimage
-f
$@.its
$@.new
100 define Build
/qsdk-ipq-app-gpt
101 cp
$@
$@.tmp
2>/dev
/null || true
102 ptgen
-g
-o
$@.tmp
-a
1 -l
1024 \
103 -t
0x2e -N
0:HLOS
-r
-p
32M \
104 -t
0x83 -N rootfs
-r
-p
128M \
105 -N rootfs_data
-p
512M
111 -$(STAGING_DIR_HOST
)/bin
/mksenaofw \
112 -n
$(BOARD_NAME
) -r
$(VENDOR_ID
) -p
$(1) \
113 -c
$(DATECODE
) -w
$(2) -x
$(CW_VER
) -t
0 \
119 define Build
/wrgg-image
122 -d
"$(WRGG_DEVNAME)" \
123 -s
"$(WRGG_SIGNATURE)" \
128 define Device
/8dev_habanero-dvk
129 $(call Device
/FitImageLzma
)
130 DEVICE_VENDOR
:= 8devices
131 DEVICE_MODEL
:= Habanero DVK
134 IMAGE
/sysupgrade.bin
:= append-kernel | pad-to
64k | append-rootfs | pad-rootfs | check-size | append-metadata
135 DEVICE_PACKAGES
:= ipq-wifi-8dev_habanero
137 TARGET_DEVICES
+= 8dev_habanero-dvk
139 define Device
/8dev_jalapeno-common
140 $(call Device
/FitImage
)
141 $(call Device
/UbiFit
)
145 DEVICE_PACKAGES
:= ipq-wifi-8dev_jalapeno
148 define Device
/8dev_jalapeno
149 $(call Device
/8dev_jalapeno-common
)
150 DEVICE_VENDOR
:= 8devices
151 DEVICE_MODEL
:= Jalapeno
153 TARGET_DEVICES
+= 8dev_jalapeno
155 define Device
/alfa-network_ap120c-ac
156 $(call Device
/FitImage
)
157 $(call Device
/UbiFit
)
158 DEVICE_VENDOR
:= ALFA Network
159 DEVICE_MODEL
:= AP120C-AC
161 DEVICE_PACKAGES
:= kmod-usb-acm kmod-tpm-i2c-atmel
165 IMAGES
:= factory.bin sysupgrade.bin
166 IMAGE
/factory.bin
:= append-ubi | qsdk-ipq-factory-nand
168 TARGET_DEVICES
+= alfa-network_ap120c-ac
170 define Device
/aruba_glenmorangie
171 $(call Device
/FitImageLzma
)
172 DEVICE_VENDOR
:= Aruba
176 define Device
/aruba_ap-303
177 $(call Device
/aruba_glenmorangie
)
178 DEVICE_MODEL
:= AP-303
180 TARGET_DEVICES
+= aruba_ap-303
182 define Device
/aruba_ap-303h
183 $(call Device
/aruba_glenmorangie
)
184 DEVICE_MODEL
:= AP-303H
186 TARGET_DEVICES
+= aruba_ap-303h
188 define Device
/aruba_ap-365
189 $(call Device
/aruba_glenmorangie
)
190 DEVICE_MODEL
:= AP-365
191 DEVICE_PACKAGES
:= kmod-hwmon-ad7418 ipq-wifi-aruba_ap-365
194 #TARGET_DEVICES += aruba_ap-365
196 define Device
/asus_map-ac2200
197 $(call Device
/FitImageLzma
)
198 DEVICE_VENDOR
:= ASUS
199 DEVICE_MODEL
:= Lyra
(MAP-AC2200
)
201 DEVICE_PACKAGES
:= ath10k-firmware-qca9888-ct kmod-ath3k
203 TARGET_DEVICES
+= asus_map-ac2200
205 # WARNING: this is an initramfs image that gets you half of the way there
206 # you need to delete the jffs2 ubi volume and sysupgrade to the final image
207 # to get a "trx" you can flash via web UI for ac42u/ac58u:
208 # - change call Device/FitImageLzma to Device/FitImage
209 # - add the following below UIMAGE_NAME
210 # UIMAGE_MAGIC := 0x27051956
211 # IMAGES += factory.trx
212 # IMAGE/factory.trx := copy-file $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE) | uImage none
213 define Device
/asus_rt-ac42u
214 $(call Device
/FitImageLzma
)
215 DEVICE_VENDOR
:= ASUS
216 DEVICE_MODEL
:= RT-AC42U
217 DEVICE_ALT0_VENDOR
:= ASUS
218 DEVICE_ALT0_MODEL
:= RT-ACRH17
219 DEVICE_ALT1_VENDOR
:= ASUS
220 DEVICE_ALT1_MODEL
:= RT-AC2200
224 IMAGE_SIZE
:= 20439364
225 FILESYSTEMS
:= squashfs
226 # RT-AC82U is nowhere to be found online
227 # Rather, this device is a/k/a RT-AC42U
228 # But we'll go with what the vendor firmware has...
229 UIMAGE_NAME
:=$(shell echo
-e
'\03\01\01\01RT-AC82U')
230 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct kmod-usb-ledtrig-usbport
232 TARGET_DEVICES
+= asus_rt-ac42u
234 define Device
/asus_rt-ac58u
235 $(call Device
/FitImageLzma
)
236 DEVICE_VENDOR
:= ASUS
237 DEVICE_MODEL
:= RT-AC58U
238 DEVICE_ALT0_VENDOR
:= ASUS
239 DEVICE_ALT0_MODEL
:= RT-ACRH13
243 IMAGE_SIZE
:= 20439364
244 FILESYSTEMS
:= squashfs
245 # Someone - in their infinite wisdom - decided to put the firmware
246 # version in front of the image name \03\00\00\04 => Version 3.0.0.4
247 # Since u-boot works with strings we either need another fixup step
248 # to add a version... or we are very careful not to add '\0' into that
249 # string and call it a day.... Yeah, we do the latter!
250 UIMAGE_NAME
:=$(shell echo
-e
'\03\01\01\01RT-AC58U')
251 DEVICE_PACKAGES
:= -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
252 kmod-usb-ledtrig-usbport
254 TARGET_DEVICES
+= asus_rt-ac58u
256 define Device
/avm_fritzbox-4040
257 $(call Device
/FitImageLzma
)
259 DEVICE_MODEL
:= FRITZ
!Box
4040
261 BOARD_NAME
:= fritz4040
263 UBOOT_PATH
:= $(STAGING_DIR_IMAGE
)/uboot-fritz4040.bin
264 UBOOT_PARTITION_SIZE
:= 524288
266 IMAGE
/eva.bin
:= append-uboot | pad-to
$$$$(UBOOT_PARTITION_SIZE
) | append-kernel | append-rootfs | pad-rootfs
267 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
268 DEVICE_PACKAGES
:= fritz-tffs fritz-caldata
270 TARGET_DEVICES
+= avm_fritzbox-4040
272 define Device
/avm_fritzbox-7530
273 $(call Device
/FitImageLzma
)
275 DEVICE_MODEL
:= FRITZ
!Box
7530
276 DEVICE_ALT0_VENDOR
:= AVM
277 DEVICE_ALT0_MODEL
:= FRITZ
!Box
7520
279 DEVICE_PACKAGES
:= fritz-caldata fritz-tffs-nand ltq-vdsl-vr11-app
281 TARGET_DEVICES
+= avm_fritzbox-7530
283 define Device
/avm_fritzrepeater-1200
284 $(call Device
/FitImageLzma
)
286 DEVICE_MODEL
:= FRITZ
!Repeater
1200
288 DEVICE_PACKAGES
:= fritz-caldata fritz-tffs-nand
290 TARGET_DEVICES
+= avm_fritzrepeater-1200
292 define Device
/avm_fritzrepeater-3000
293 $(call Device
/FitImageLzma
)
295 DEVICE_MODEL
:= FRITZ
!Repeater
3000
297 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
300 #TARGET_DEVICES += avm_fritzrepeater-3000
302 define Device
/buffalo_wtr-m2133hp
303 $(call Device
/FitImage
)
304 $(call Device
/UbiFit
)
305 DEVICE_VENDOR
:= Buffalo
306 DEVICE_MODEL
:= WTR-M2133HP
308 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct
313 #TARGET_DEVICES += buffalo_wtr-m2133hp
315 define Device
/cellc_rtl30vw
316 KERNEL_SUFFIX
:= -zImage.itb
317 KERNEL_INITRAMFS
= kernel-bin | gzip | fit gzip
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb
318 KERNEL
= kernel-bin | fit none
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb | uImage lzma | pad-to
2048
319 KERNEL_NAME
:= zImage
321 IMAGES
:= factory.bin sysupgrade.bin
322 IMAGE
/factory.bin
:= append-rootfshdr kernel | append-ubi | qsdk-ipq-factory-nand-askey kernel
323 IMAGE
/sysupgrade.bin
:= append-rootfshdr kernel | sysupgrade-tar kernel
=$$$$@.kernel | append-metadata
324 DEVICE_VENDOR
:= Cell C
325 DEVICE_MODEL
:= RTL30VW
327 DEVICE_DTS_CONFIG
:= config@
5
333 DEVICE_PACKAGES
:= kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
335 TARGET_DEVICES
+= cellc_rtl30vw
337 define Device
/cilab_meshpoint-one
338 $(call Device
/8dev_jalapeno-common
)
339 DEVICE_VENDOR
:= Crisis Innovation Lab
340 DEVICE_MODEL
:= MeshPoint.One
341 DEVICE_PACKAGES
+= kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
344 #TARGET_DEVICES += cilab_meshpoint-one
346 define Device
/compex_wpj419
347 $(call Device
/FitImage
)
348 $(call Device
/UbiFit
)
349 DEVICE_VENDOR
:= Compex
350 DEVICE_MODEL
:= WPJ419
352 DEVICE_DTS_CONFIG
:= config@
12
356 FILESYSTEMS
:= squashfs
359 #TARGET_DEVICES += compex_wpj419
361 define Device
/compex_wpj428
362 $(call Device
/FitImage
)
363 DEVICE_VENDOR
:= Compex
364 DEVICE_MODEL
:= WPJ428
366 DEVICE_DTS_CONFIG
:= config@
4
370 IMAGES
+= cpximg-6a04.bin
371 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
372 IMAGE
/cpximg-6a04.bin
:= append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m
0x8A2 3
373 DEVICE_PACKAGES
:= kmod-gpio-beeper
376 TARGET_DEVICES
+= compex_wpj428
378 define Device
/devolo_magic-2-wifi-next
379 $(call Device
/FitImage
)
380 DEVICE_VENDOR
:= devolo
381 DEVICE_MODEL
:= Magic
2 WiFi next
385 # If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
386 # it will bootm it, just like we want for the initramfs.
387 KERNEL_INITRAMFS
:= kernel-bin | gzip | fit gzip
$$(KDIR
)/image-
$$(DEVICE_DTS
).dtb | pad-to
64k |\
388 append-string
-e
'\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
391 IMAGES
:= sysupgrade.bin
392 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
393 DEVICE_PACKAGES
:= ipq-wifi-devolo_magic-2-wifi-next
397 #TARGET_DEVICES += devolo_magic-2-wifi-next
399 define Device
/dlink_dap-2610
400 $(call Device
/FitImageLzma
)
401 DEVICE_VENDOR
:= D-Link
402 DEVICE_MODEL
:= DAP-2610
404 DEVICE_DTS_CONFIG
:= config@ap.dk01.1
-c1
406 WRGG_DEVNAME
:= /dev
/mtdblock
/8
407 WRGG_SIGNATURE
:= wapac30_dkbs_dap2610
409 IMAGES
+= factory.bin
410 # Bootloader expects a special 160 byte header which is added by
412 # Factory image size must be larger than 6MB, and size in wrgg header must
413 # match actual factory image size to be flashable from D-Link http server.
414 # Bootloader verifies checksum of wrgg image before booting, thus jffs2
415 # cannot be part of the wrgg image. This is solved in the factory image by
416 # having the rootfs at the end of the image (without pad-rootfs). And in
417 # the sysupgrade image only the kernel is included in the wrgg checksum,
418 # but this is not flashable from the D-link http server.
419 # append-rootfs must start on an erase block boundary.
420 IMAGE
/factory.bin
:= append-kernel | pad-offset
6144k
160 | append-rootfs | wrgg-image | check-size
421 IMAGE
/sysupgrade.bin
:= append-kernel | wrgg-image | pad-to
$$$$(BLOCKSIZE
) | append-rootfs | pad-rootfs | check-size | append-metadata
423 TARGET_DEVICES
+= dlink_dap-2610
425 define Device
/edgecore_ecw5211
426 $(call Device
/FitImage
)
427 $(call Device
/UbiFit
)
428 DEVICE_VENDOR
:= Edgecore
429 DEVICE_MODEL
:= ECW5211
433 DEVICE_DTS_CONFIG
:= config@ap.dk01.1
-c2
434 DEVICE_PACKAGES
:= kmod-tpm-i2c-atmel kmod-usb-acm
436 TARGET_DEVICES
+= edgecore_ecw5211
438 define Device
/edgecore_oap100
439 $(call Device
/FitImage
)
440 $(call Device
/UbiFit
)
441 DEVICE_VENDOR
:= Edgecore
442 DEVICE_MODEL
:= OAP100
446 IMAGES
:= sysupgrade.bin
447 DEVICE_DTS_CONFIG
:= config@ap.dk07.1
-c1
448 DEVICE_PACKAGES
:= ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
451 #TARGET_DEVICES += edgecore_oap100
453 define Device
/engenius_eap1300
454 $(call Device
/FitImage
)
455 DEVICE_VENDOR
:= EnGenius
456 DEVICE_MODEL
:= EAP1300
457 DEVICE_DTS_CONFIG
:= config@
4
458 BOARD_NAME
:= eap1300
462 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
465 #TARGET_DEVICES += engenius_eap1300
467 define Device
/engenius_eap2200
468 $(call Device
/FitImage
)
469 $(call Device
/UbiFit
)
470 DEVICE_VENDOR
:= EnGenius
471 DEVICE_MODEL
:= EAP2200
475 DEVICE_PACKAGES
:= ath10k-firmware-qca9888-ct
-kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
478 #TARGET_DEVICES += engenius_eap2200
480 define Device
/engenius_emd1
481 $(call Device
/FitImage
)
482 DEVICE_VENDOR
:= EnGenius
484 DEVICE_DTS_CONFIG
:= config@
4
487 IMAGES
+= factory.bin
488 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
489 IMAGE
/factory.bin
:= qsdk-ipq-factory-nor | check-size
492 #TARGET_DEVICES += engenius_emd1
494 define Device
/engenius_emr3500
495 $(call Device
/FitImage
)
496 DEVICE_VENDOR
:= EnGenius
497 DEVICE_MODEL
:= EMR3500
498 DEVICE_DTS_CONFIG
:= config@
4
502 IMAGES
+= factory.bin
503 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
504 IMAGE
/factory.bin
:= qsdk-ipq-factory-nor | check-size
508 #TARGET_DEVICES += engenius_emr3500
510 define Device
/engenius_ens620ext
511 $(call Device
/FitImage
)
512 DEVICE_VENDOR
:= EnGenius
513 DEVICE_MODEL
:= ENS620EXT
515 DEVICE_DTS_CONFIG
:= config@
4
518 BOARD_NAME
:= ENS620EXT
521 PRODUCT_ID_NEW
:= 0xA4
528 FILESYSTEMS
:= squashfs
529 IMAGES
+= factory_30.bin factory_35.bin
530 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
531 IMAGE
/factory_30.bin
:= append-kernel | pad-to
$$$$(KERNEL_SIZE
) | append-rootfs | pad-rootfs | check-size | SenaoFW
$$$$(PRODUCT_ID
) $$$$(FW_VER
)
532 IMAGE
/factory_35.bin
:= qsdk-ipq-factory-nor | check-size | SenaoFW
$$$$(PRODUCT_ID_NEW
) $$$$(FW_VER_NEW
)
535 #TARGET_DEVICES += engenius_ens620ext
537 define Device
/extreme-networks_ws-ap3915i
538 $(call Device
/FitImage
)
539 DEVICE_VENDOR
:= Extreme Networks
540 DEVICE_MODEL
:= WS-AP3915i
544 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
545 DEVICE_PACKAGES
:= ipq-wifi-extreme-networks_ws-ap3915i
547 TARGET_DEVICES
+= extreme-networks_ws-ap3915i
549 define Device
/ezviz_cs-w3-wd1200g-eup
550 $(call Device
/FitImage
)
551 DEVICE_VENDOR
:= EZVIZ
552 DEVICE_MODEL
:= CS-W3-WD1200G
553 DEVICE_VARIANT
:= EUP
557 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | \
559 DEVICE_PACKAGES
:= -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
560 DEVICE_COMPAT_VERSION
:= 2.0
561 DEVICE_COMPAT_MESSAGE
:= uboot
's bootcmd has to be updated (see wiki). \
562 Upgrade via sysupgrade mechanism is not possible.
565 #TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
567 define Device/glinet_gl-a1300
568 $(call Device/FitImage)
569 $(call Device/UbiFit)
570 DEVICE_VENDOR := GL.iNet
571 DEVICE_MODEL := GL-A1300
573 DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
576 IMAGE_SIZE := 131072k
577 DEVICE_PACKAGE := ipq-wifi-glinet_gl-a1300
579 TARGET_DEVICES += glinet_gl-a1300
581 define Device/glinet_gl-ap1300
582 $(call Device/FitImage)
583 $(call Device/UbiFit)
584 DEVICE_VENDOR := GL.iNet
585 DEVICE_MODEL := GL-AP1300
587 DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
590 IMAGE_SIZE := 131072k
592 DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300 kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
595 #TARGET_DEVICES += glinet_gl-ap1300
597 define Device/glinet_gl-b1300
598 $(call Device/FitzImage)
599 DEVICE_VENDOR := GL.iNet
600 DEVICE_MODEL := GL-B1300
601 BOARD_NAME := gl-b1300
605 IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
607 TARGET_DEVICES += glinet_gl-b1300
609 define Device/glinet_gl-b2200
610 $(call Device/FitzImage)
611 DEVICE_VENDOR := GL.iNet
612 DEVICE_MODEL := GL-B2200
614 DEVICE_DTS_CONFIG := config@ap.dk04.1-c3
615 KERNEL_INITRAMFS_SUFFIX := -recovery.itb
616 IMAGES := emmc.img.gz sysupgrade.bin
617 IMAGE/emmc.img.gz := qsdk-ipq-app-gpt |\
618 pad-to 1024k | append-kernel |\
619 pad-to 33792k | append-rootfs |\
620 append-metadata | gzip
621 IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
622 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct \
623 kmod-fs-ext4 kmod-mmc kmod-spi-dev mkf2fs e2fsprogs kmod-fs-f2fs
625 TARGET_DEVICES += glinet_gl-b2200
627 define Device/glinet_gl-s1300
628 $(call Device/FitzImage)
629 DEVICE_VENDOR := GL.iNet
630 DEVICE_MODEL := GL-S1300
634 IMAGES := sysupgrade.bin
635 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
636 DEVICE_PACKAGES := ipq-wifi-glinet_gl-s1300 kmod-fs-ext4 kmod-mmc kmod-spi-dev
639 #TARGET_DEVICES += glinet_gl-s1300
641 define Device/kernel-size-6350-8300
642 DEVICE_COMPAT_VERSION := 2.0
643 DEVICE_COMPAT_MESSAGE := Kernel partition size must be increased for \
644 this OpenWrt version. Before continuing, you MUST issue either the \
645 command "fw_setenv kernsize 500000" from the OpenWrt command line, \
646 or "setenv kernsize 500000 ; saveenv" from the U-Boot serial console. \
647 Instead of the sysupgrade image, you must then install the OpenWrt \
648 factory image, setting the force flag and wiping the configuration. \
649 (e.g. "sysupgrade -n -F openwrt-squashfs-factory.bin" on command line)
652 define Device/linksys_ea6350v3
653 # The Linksys EA6350v3 has a uboot bootloader that does not
654 # support either booting lzma kernel images nor booting UBI
655 # partitions. This uboot, however, supports raw kernel images and
658 # As configured by the OEM factory, the device will boot the kernel
659 # from a fixed address with a fixed length of 3 MiB. Also, the
660 # device has a hard-coded kernel command line that requires the
661 # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
662 # Oh... and the kernel partition overlaps with the rootfs
663 # partition (the same for alt_kernel and alt_rootfs).
665 # If you are planing re-partitioning the device, you may want to
666 # keep these details in mind:
667 # 1. The kernel addresses you should honor are 0x00000000 and
668 # 0x02800000 respectively.
669 # 2. The kernel size (plus the dtb) cannot exceed 3 MiB in size
670 # unless the uboot environment variable "kernsize" is increased.
671 # 3. You can use 'zImage
', but not a raw 'Image
' packed with lzma.
672 # 4. The kernel command line from uboot is harcoded to boot with
673 # rootfs either in mtd11 or mtd13.
674 $(call Device/FitzImage)
675 $(call Device/kernel-size-6350-8300)
676 DEVICE_VENDOR := Linksys
677 DEVICE_MODEL := EA6350
685 IMAGES += factory.bin
686 IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
688 TARGET_DEVICES += linksys_ea6350v3
690 define Device/linksys_ea8300
691 $(call Device/FitzImage)
692 $(call Device/kernel-size-6350-8300)
693 DEVICE_VENDOR := Linksys
694 DEVICE_MODEL := EA8300
700 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
701 IMAGES += factory.bin
702 IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
703 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
705 TARGET_DEVICES += linksys_ea8300
707 define Device/linksys_mr8300
708 $(call Device/FitzImage)
709 $(call Device/kernel-size-6350-8300)
710 DEVICE_VENDOR := Linksys
711 DEVICE_MODEL := MR8300
717 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
718 IMAGES += factory.bin
719 IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
720 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
722 TARGET_DEVICES += linksys_mr8300
724 define Device/linksys_whw03v2
725 $(call Device/FitzImage)
726 DEVICE_VENDOR := Linksys
727 DEVICE_MODEL := WHW03
731 IMAGE_SIZE := 158720k
734 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
735 IMAGES += factory.bin
736 IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW03v2
737 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_whw03v2 kmod-leds-pca963x kmod-spi-dev kmod-bluetooth
739 TARGET_DEVICES += linksys_whw03v2
741 define Device/linksys_whw01
742 $(call Device/FitzImage)
743 DEVICE_VENDOR := Linksys
744 DEVICE_MODEL := WHW01
750 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
751 IMAGES += factory.bin
752 IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW01
753 DEVICE_PACKAGES := uboot-envtools kmod-leds-pca963x
755 TARGET_DEVICES += linksys_whw01
757 define Device/luma_wrtq-329acn
758 $(call Device/FitImage)
759 DEVICE_VENDOR := Luma Home
760 DEVICE_MODEL := WRTQ-329ACN
762 DEVICE_PACKAGES := kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio
767 TARGET_DEVICES += luma_wrtq-329acn
769 define Device/meraki_mr33
770 $(call Device/FitImage)
771 DEVICE_VENDOR := Cisco Meraki
776 DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
778 TARGET_DEVICES += meraki_mr33
780 define Device/meraki_mr74
781 $(call Device/FitImage)
782 DEVICE_VENDOR := Cisco Meraki
787 DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
788 DEVICE_DTS_CONFIG := config@3
790 TARGET_DEVICES += meraki_mr74
792 define Device/mobipromo_cm520-79f
793 $(call Device/FitzImage)
794 $(call Device/UbiFit)
795 DEVICE_VENDOR := MobiPromo
796 DEVICE_MODEL := CM520-79F
800 DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
802 TARGET_DEVICES += mobipromo_cm520-79f
804 define Device/netgear_ex61x0v2
805 $(call Device/DniImage)
806 DEVICE_VENDOR := NETGEAR
807 DEVICE_DTS_CONFIG := config@4
808 NETGEAR_BOARD_ID := EX6150v2series
809 NETGEAR_HW_ID := 29765285+16+0+128+2x2
814 define Device/netgear_ex6100v2
815 $(call Device/netgear_ex61x0v2)
816 DEVICE_MODEL := EX6100
819 TARGET_DEVICES += netgear_ex6100v2
821 define Device/netgear_ex6150v2
822 $(call Device/netgear_ex61x0v2)
823 DEVICE_MODEL := EX6150
826 TARGET_DEVICES += netgear_ex6150v2
828 define Device/netgear_orbi
829 $(call Device/DniImage)
831 DEVICE_VENDOR := NETGEAR
832 IMAGE/factory.img := append-kernel | pad-offset 128k 64 | \
833 append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | \
834 append-rootfs | pad-rootfs | netgear-dni
835 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | \
836 sysupgrade-tar rootfs=$$$$@ | append-metadata
837 DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
840 define Device/netgear_rbx50
841 $(call Device/netgear_orbi)
842 NETGEAR_HW_ID := 29765352+0+4000+512+2x2+2x2+4x4
843 KERNEL_SIZE := 3932160
844 ROOTFS_SIZE := 32243712
845 IMAGE_SIZE := 36175872
848 define Device/netgear_rbr50
849 $(call Device/netgear_rbx50)
850 DEVICE_MODEL := RBR50
852 NETGEAR_BOARD_ID := RBR50
854 TARGET_DEVICES += netgear_rbr50
856 define Device/netgear_rbs50
857 $(call Device/netgear_rbx50)
858 DEVICE_MODEL := RBS50
860 NETGEAR_BOARD_ID := RBS50
862 TARGET_DEVICES += netgear_rbs50
864 define Device/netgear_srx60
865 $(call Device/netgear_orbi)
866 NETGEAR_HW_ID := 29765352+0+4096+512+2x2+2x2+4x4
867 KERNEL_SIZE := 3932160
868 ROOTFS_SIZE := 32243712
869 IMAGE_SIZE := 36175872
872 define Device/netgear_srr60
873 $(call Device/netgear_srx60)
874 DEVICE_MODEL := SRR60
875 NETGEAR_BOARD_ID := SRR60
877 TARGET_DEVICES += netgear_srr60
879 define Device/netgear_srs60
880 $(call Device/netgear_srx60)
881 DEVICE_MODEL := SRS60
882 NETGEAR_BOARD_ID := SRS60
884 TARGET_DEVICES += netgear_srs60
886 define Device/netgear_wac510
887 $(call Device/FitImage)
888 $(call Device/UbiFit)
889 DEVICE_VENDOR := Netgear
890 DEVICE_MODEL := WAC510
892 DEVICE_DTS_CONFIG := config@5
895 IMAGES += factory.tar
896 IMAGE/factory.tar := append-ubi | wac5xx-netgear-tar
897 DEVICE_PACKAGES := uboot-envtools
899 TARGET_DEVICES += netgear_wac510
901 define Device/openmesh_a42
902 $(call Device/FitImageLzma)
903 DEVICE_VENDOR := OpenMesh
906 DEVICE_DTS_CONFIG := config@om.a42
908 KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
910 IMAGES += factory.bin
911 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
912 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
914 TARGET_DEVICES += openmesh_a42
916 define Device/openmesh_a62
917 $(call Device/FitImageLzma)
918 DEVICE_VENDOR := OpenMesh
921 DEVICE_DTS_CONFIG := config@om.a62
923 KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
925 IMAGES += factory.bin
926 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
927 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
928 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
930 TARGET_DEVICES += openmesh_a62
932 define Device/p2w_r619ac
933 $(call Device/FitzImage)
934 $(call Device/UbiFit)
936 DEVICE_MODEL := R619AC
938 DEVICE_DTS_CONFIG := config@10
941 DEVICE_PACKAGES := ipq-wifi-p2w_r619ac
944 define Device/p2w_r619ac-64m
945 $(call Device/p2w_r619ac)
946 DEVICE_VARIANT := 64M NAND
947 IMAGES += factory.bin
948 IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
950 TARGET_DEVICES += p2w_r619ac-64m
952 define Device/p2w_r619ac-128m
953 $(call Device/p2w_r619ac)
954 DEVICE_VARIANT := 128M NAND
956 TARGET_DEVICES += p2w_r619ac-128m
958 define Device/pakedge_wr-1
959 $(call Device/FitImageLzma)
960 DEVICE_VENDOR := Pakedge
962 DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
963 DEVICE_PACKAGES := ipq-wifi-pakedge_wr-1
967 IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | append-metadata
969 TARGET_DEVICES += pakedge_wr-1
971 define Device/plasmacloud_pa1200
972 $(call Device/FitImageLzma)
973 DEVICE_VENDOR := Plasma Cloud
974 DEVICE_MODEL := PA1200
976 DEVICE_DTS_CONFIG := config@pc.pa1200
978 KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
980 IMAGES += factory.bin
981 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
982 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
984 TARGET_DEVICES += plasmacloud_pa1200
986 define Device/plasmacloud_pa2200
987 $(call Device/FitImageLzma)
988 DEVICE_VENDOR := Plasma Cloud
989 DEVICE_MODEL := PA2200
991 DEVICE_DTS_CONFIG := config@pc.pa2200
993 KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
995 IMAGES += factory.bin
996 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
997 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
998 DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
1000 TARGET_DEVICES += plasmacloud_pa2200
1002 define Device/qcom_ap-dk01.1-c1
1003 DEVICE_VENDOR := Qualcomm Atheros
1004 DEVICE_MODEL := AP-DK01.1
1005 DEVICE_VARIANT := C1
1006 BOARD_NAME := ap-dk01.1-c1
1008 DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
1010 KERNEL_SIZE := 4096k
1011 IMAGE_SIZE := 26624k
1012 $(call Device/FitImage)
1013 IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
1016 TARGET_DEVICES += qcom_ap-dk01.1-c1
1018 define Device/qcom_ap-dk04.1-c1
1019 $(call Device/FitImage)
1020 $(call Device/UbiFit)
1021 DEVICE_VENDOR := Qualcomm Atheros
1022 DEVICE_MODEL := AP-DK04.1
1023 DEVICE_VARIANT := C1
1025 DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
1027 KERNEL_SIZE := 4048k
1030 BOARD_NAME := ap-dk04.1-c1
1033 TARGET_DEVICES += qcom_ap-dk04.1-c1
1035 define Device/qxwlan_e2600ac-c1
1036 $(call Device/FitImage)
1037 DEVICE_VENDOR := Qxwlan
1038 DEVICE_MODEL := E2600AC
1039 DEVICE_VARIANT := C1
1040 BOARD_NAME := e2600ac-c1
1042 KERNEL_SIZE := 4096k
1043 IMAGE_SIZE := 31232k
1044 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1045 DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c1
1049 #TARGET_DEVICES += qxwlan_e2600ac-c1
1051 define Device/qxwlan_e2600ac-c2
1052 $(call Device/FitImage)
1053 $(call Device/UbiFit)
1054 DEVICE_VENDOR := Qxwlan
1055 DEVICE_MODEL := E2600AC
1056 DEVICE_VARIANT := C2
1061 DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c2
1064 #TARGET_DEVICES += qxwlan_e2600ac-c2
1066 define Device/sony_ncp-hg100-cellular
1067 $(call Device/FitImage)
1068 DEVICE_VENDOR := Sony
1069 DEVICE_MODEL := NCP-HG100/Cellular
1070 DEVICE_DTS_CONFIG := config@ap.dk04.1-c4
1072 KERNEL_SIZE := 8192k
1074 DEVICE_PACKAGES := e2fsprogs ipq-wifi-sony_ncp-hg100-cellular \
1077 TARGET_DEVICES += sony_ncp-hg100-cellular
1079 define Device/teltonika_rutx10
1080 $(call Device/FitImage)
1081 $(call Device/UbiFit)
1082 DEVICE_VENDOR := Teltonika
1083 DEVICE_MODEL := RUTX10
1085 DEVICE_DTS_CONFIG := config@5
1089 FILESYSTEMS := squashfs
1090 IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
1091 DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-bluetooth
1094 #TARGET_DEVICES += teltonika_rutx10
1096 define Device/tel_x1pro
1097 $(call Device/FitImage)
1098 DEVICE_VENDOR := Telco
1099 DEVICE_MODEL := X1 Pro
1101 KERNEL_SIZE := 4096k
1102 IMAGE_SIZE := 31232k
1103 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1104 DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1108 #TARGET_DEVICES += tel_x1pro
1110 define Device/unielec_u4019-32m
1111 $(call Device/FitImage)
1112 DEVICE_VENDOR := Unielec
1113 DEVICE_MODEL := U4019
1114 DEVICE_VARIANT := 32M
1115 BOARD_NAME := u4019-32m
1117 KERNEL_SIZE := 4096k
1118 IMAGE_SIZE := 31232k
1119 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1123 #TARGET_DEVICES += unielec_u4019-32m
1125 define Device/zte_mf18a
1126 $(call Device/FitImage)
1127 DEVICE_VENDOR := ZTE
1128 DEVICE_MODEL := MF18A
1130 DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
1134 DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct ipq-wifi-zte_mf18a
1136 TARGET_DEVICES += zte_mf18a
1138 define Device/zte_mf28x_common
1139 $(call Device/FitzImage)
1140 DEVICE_VENDOR := ZTE
1142 DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
1146 DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1149 define Device/zte_mf286d
1150 $(call Device/zte_mf28x_common)
1151 DEVICE_MODEL := MF286D
1153 TARGET_DEVICES += zte_mf286d
1155 define Device/zte_mf289f
1156 $(call Device/zte_mf28x_common)
1157 DEVICE_MODEL := MF289F
1158 DEVICE_PACKAGES += ipq-wifi-zte_mf289f ath10k-firmware-qca9984-ct
1160 TARGET_DEVICES += zte_mf289f
1162 define Device/zyxel_nbg6617
1163 $(call Device/FitImageLzma)
1164 DEVICE_VENDOR := ZyXEL
1165 DEVICE_MODEL := NBG6617
1167 KERNEL_SIZE := 4096k
1168 ROOTFS_SIZE := 24960k
1169 RAS_BOARD := NBG6617
1170 RAS_ROOTFS_SIZE := 19840k
1171 RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
1172 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1173 IMAGES += factory.bin
1174 # The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
1175 # at least as large as the one of the initial firmware image (not the current
1176 # one on the device). This only applies to the Web-UI, the bootlaoder ignores
1177 # this minimum-size. However, the larger image can be flashed both ways.
1178 IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
1179 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
1180 DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
1182 TARGET_DEVICES += zyxel_nbg6617
1184 define Device/zyxel_wre6606
1185 $(call Device/FitImage)
1186 DEVICE_VENDOR := ZyXEL
1187 DEVICE_MODEL := WRE6606
1188 DEVICE_DTS_CONFIG := config@4
1190 IMAGE_SIZE := 13184k
1191 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
1192 DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
1195 #TARGET_DEVICES += zyxel_wre6606