1 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
2 +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
6 #include "qcom-ipq4019.dtsi"
7 +#include <dt-bindings/soc/qcom,tcsr.h>
10 model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
16 + /* select hostmode */
17 + compatible = "qcom,tcsr";
18 + reg = <0x194b000 0x100>;
19 + qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
24 + compatible = "qcom,tcsr";
25 + reg = <0x1953000 0x1000>;
26 + qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
30 + compatible = "qcom,tcsr";
31 + reg = <0x1949000 0x100>;
32 + qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
36 + compatible = "qcom,tcsr";
37 + reg = <0x1957000 0x100>;
38 + qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
45 pinctrl-names = "default";
47 cs-gpios = <&tlmm 54 0>;
50 - #address-cells = <1>;
53 - compatible = "mx25l25635e";
54 - spi-max-frequency = <24000000>;
68 + ess-switch@c000000 {
80 + usb3_ss_phy: ssphy@9a000 {
84 + usb3_hs_phy: hsphy@a6000 {
88 + usb3: usb3@8af8800 {
92 + usb2_hs_phy: hsphy@a8000 {
96 + usb2: usb2@60f8800 {
101 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
102 +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
106 model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";
107 + compatible = "qcom,ap-dk01.1-c1", "qcom,ap-dk01.2-c1";
110 + device_type = "memory";
111 + reg = <0x80000000 0x10000000>;
117 + compatible = "mx25l25635f", "jedec,spi-nor";
118 + #address-cells = <1>;
121 + spi-max-frequency = <24000000>;
125 + reg = <0x0 0x40000>;
130 + reg = <0x40000 0x20000>;
135 + reg = <0x60000 0x60000>;
140 + reg = <0xc0000 0x10000>;
144 + label = "DDRPARAMS";
145 + reg = <0xd0000 0x10000>;
149 + label = "APPSBLENV";
150 + reg = <0xe0000 0x10000>;
155 + reg = <0xf0000 0x80000>;
160 + reg = <0x170000 0x10000>;
165 + reg = <0x180000 0x400000>;
169 + reg = <0x580000 0x1600000>;
172 + label = "firmware";
173 + reg = <0x180000 0x1a00000>;