target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

   1 #!/bin/sh
   2
   3 [ -e /lib/firmware/$FIRMWARE ] && exit 0
   4
   5 . /lib/functions/caldata.sh
   6
   7 board=$(board_name)
   8
   9 case "$FIRMWARE" in
  10 "ath10k/pre-cal-pci-0000:01:00.0.bin")
  11         case $board in
  12         asrock,g10)
  13                 if [ -b "$(find_mtd_part 0:art)" ]; then
  14                         caldata_extract "0:art" 0x1000 0x2f20
  15                 else
  16                         # XXX: drop upper case after kernel v5.4 is gone (qcom-smem)
  17                         caldata_extract "0:ART" 0x1000 0x2f20
  18                 fi
  19                 ;;
  20         buffalo,wxr-2533dhp)
  21                 caldata_extract "ART" 0x1000 0x2f20
  22                 ath10k_patch_mac $(mtd_get_mac_binary ART 0x1e)
  23                 ;;
  24         edgecore,ecw5410)
  25                 if [ -b "$(find_mtd_part 0:art)" ]; then
  26                         caldata_extract "0:art" 0x1000 0x2f20
  27                 else
  28                         # XXX: drop upper case after kernel v5.4 is gone (qcom-smem)
  29                         caldata_extract "0:ART" 0x1000 0x2f20
  30                 fi
  31                 ;;
  32         linksys,ea7500-v1 |\
  33         linksys,ea8500)
  34                 caldata_extract "art" 0x1000 0x2f20
  35                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) +1)
  36                 ;;
  37         nec,wg2600hp |\
  38         nec,wg2600hp3)
  39                 caldata_extract "ART" 0x1000 0x2f20
  40                 ath10k_patch_mac $(mtd_get_mac_binary PRODUCTDATA 0x12)
  41                 ;;
  42         netgear,d7800 |\
  43         netgear,r7500v2 |\
  44         netgear,r7800)
  45                 caldata_extract "art" 0x1000 0x2f20
  46                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x6) +1)
  47                 ;;
  48         tplink,ad7200 |\
  49         tplink,c2600)
  50                 caldata_extract "radio" 0x1000 0x2f20
  51                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 0x8) -1)
  52                 ;;
  53         tplink,vr2600v)
  54                 caldata_extract "ART" 0x1000 0x2f20
  55                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 0x0) -1)
  56                 ;;
  57         zyxel,nbg6817)
  58                 if [ -b "$(find_mtd_part 0:art)" ]; then
  59                         caldata_extract "0:art" 0x1000 0x2f20
  60                         ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:appsblenv ethaddr) +1)
  61                 else
  62                         # XXX: drop upper case after kernel v5.4 is gone (qcom-smem)
  63                         caldata_extract "0:ART" 0x1000 0x2f20
  64                         ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +1)
  65                 fi
  66                 ;;
  67         esac
  68         ;;
  69 "ath10k/pre-cal-pci-0001:01:00.0.bin")
  70         case $board in
  71         asrock,g10)
  72                 if [ -b "$(find_mtd_part 0:art)" ]; then
  73                         caldata_extract "0:art" 0x5000 0x2f20
  74                 else
  75                         # XXX: drop upper case after kernel v5.4 is gone (qcom-smem)
  76                         caldata_extract "0:ART" 0x5000 0x2f20
  77                 fi
  78                 ;;
  79         buffalo,wxr-2533dhp)
  80                 caldata_extract "ART" 0x5000 0x2f20
  81                 ath10k_patch_mac $(mtd_get_mac_binary ART 0x18)
  82                 ;;
  83         linksys,ea7500-v1 |\
  84         linksys,ea8500)
  85                 caldata_extract "art" 0x5000 0x2f20
  86                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) +2)
  87                 ;;
  88         nec,wg2600hp |\
  89         nec,wg2600hp3)
  90                 caldata_extract "ART" 0x5000 0x2f20
  91                 ath10k_patch_mac $(mtd_get_mac_binary PRODUCTDATA 0xc)
  92                 ;;
  93         netgear,d7800 |\
  94         netgear,r7500v2 |\
  95         netgear,r7800)
  96                 caldata_extract "art" 0x5000 0x2f20
  97                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x6) +2)
  98                 ;;
  99         tplink,ad7200 |\
 100         tplink,c2600)
 101                 caldata_extract "radio" 0x5000 0x2f20
 102                 ath10k_patch_mac $(mtd_get_mac_binary default-mac 0x8)
 103                 ;;
 104         tplink,vr2600v)
 105                 caldata_extract "ART" 0x5000 0x2f20
 106                 ath10k_patch_mac $(mtd_get_mac_binary default-mac 0x0)
 107                 ;;
 108         zyxel,nbg6817)
 109                 if [ -b "$(find_mtd_part 0:art)" ]; then
 110                         caldata_extract "0:art" 0x5000 0x2f20
 111                         ath10k_patch_mac $(mtd_get_mac_ascii 0:appsblenv ethaddr)
 112                 else
 113                         # XXX: drop upper case after kernel v5.4 is gone (qcom-smem)
 114                         caldata_extract "0:ART" 0x5000 0x2f20
 115                         ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
 116                 fi
 117                 ;;
 118         esac
 119         ;;
 120 "ath10k/pre-cal-pci-0002:01:00.0.bin")
 121         case $board in
 122         edgecore,ecw5410)
 123                 if [ -b "$(find_mtd_part 0:art)" ]; then
 124                         caldata_extract "0:art" 0x5000 0x2f20
 125                 else
 126                         # XXX: drop upper case after kernel v5.4 is gone (qcom-smem)
 127                         caldata_extract "0:ART" 0x5000 0x2f20
 128                 fi
 129                 ;;
 130         esac
 131         ;;
 132 *)
 133         exit 1
 134         ;;
 135 esac