1 #include "qcom-ipq8064-v1.0.dtsi"
4 model = "Qualcomm Technologies, Inc. IPQ8064/AP-148";
5 compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
8 reg = <0x42000000 0x1e000000>;
9 device_type = "memory";
17 reg = <0x41200000 0x300000>;
33 compatible = "qcom,smem-part";
57 pinctrl-0 = <&nand_pins>;
58 pinctrl-names = "default";
62 compatible = "qcom,nandcs";
64 nand-ecc-strength = <4>;
66 nand-ecc-step-size = <512>;
69 compatible = "qcom,smem-part";
77 pinctrl-0 = <&mdio0_pins>;
78 pinctrl-names = "default";
80 phy0: ethernet-phy@0 {
82 qca,ar8327-initvals = <
83 0x00004 0x7600000 /* PAD0_MODE */
84 0x00008 0x1000000 /* PAD5_MODE */
85 0x0000c 0x80 /* PAD6_MODE */
86 0x000e4 0x6a545 /* MAC_POWER_SEL */
87 0x000e0 0xc74164de /* SGMII_CTRL */
88 0x0007c 0x4e /* PORT0_STATUS */
89 0x00094 0x4e /* PORT6_STATUS */
93 phy4: ethernet-phy@4 {
103 pinctrl-0 = <&rgmii2_pins>;
104 pinctrl-names = "default";