1 #include "qcom-ipq8064-v2.0.dtsi"
3 #include <dt-bindings/input/input.h>
6 model = "Netgear Nighthawk X4 D7800";
7 compatible = "netgear,d7800", "qcom,ipq8064";
10 reg = <0x42000000 0x1e000000>;
11 device_type = "memory";
16 reg = <0x5fe00000 0x200000>;
24 led-boot = &power_white;
25 led-failsafe = &power_amber;
26 led-running = &power_white;
27 led-upgrade = &power_amber;
31 bootargs = "rootfstype=squashfs noinitrd";
35 compatible = "gpio-keys";
36 pinctrl-0 = <&button_pins>;
37 pinctrl-names = "default";
41 gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
42 linux,code = <KEY_RFKILL>;
43 debounce-interval = <60>;
49 gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
50 linux,code = <KEY_RESTART>;
51 debounce-interval = <60>;
57 gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
58 linux,code = <KEY_WPS_BUTTON>;
59 debounce-interval = <60>;
65 compatible = "gpio-leds";
66 pinctrl-0 = <&led_pins>;
67 pinctrl-names = "default";
71 gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
76 gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
79 power_amber: power_amber {
80 label = "amber:power";
81 gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
86 gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
91 gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
96 gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
100 label = "white:esata";
101 gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
104 power_white: power_white {
105 label = "white:power";
106 gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
107 default-state = "keep";
111 label = "white:wifi";
112 gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
118 button_pins: button_pins {
120 pins = "gpio6", "gpio54", "gpio65";
122 drive-strength = <2>;
129 pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
130 "gpio24","gpio26", "gpio53", "gpio64";
132 drive-strength = <2>;
137 usb0_pwr_en_pins: usb0_pwr_en_pins {
141 drive-strength = <12>;
147 usb1_pwr_en_pins: usb1_pwr_en_pins {
149 pins = "gpio16", "gpio68";
151 drive-strength = <12>;
169 pinctrl-0 = <&usb0_pwr_en_pins>;
170 pinctrl-names = "default";
176 pinctrl-0 = <&usb1_pwr_en_pins>;
177 pinctrl-names = "default";
182 reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
183 pinctrl-0 = <&pcie0_pins>;
184 pinctrl-names = "default";
187 reg = <0x00000000 0 0 0 0>;
188 #address-cells = <3>;
193 compatible = "pci168c,0040";
194 reg = <0x00010000 0 0 0 0>;
196 nvmem-cells = <&macaddr_art_6>, <&precal_art_1000>;
197 nvmem-cell-names = "mac-address", "pre-calibration";
198 mac-address-increment = <(1)>;
205 reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
206 pinctrl-0 = <&pcie1_pins>;
207 pinctrl-names = "default";
208 max-link-speed = <1>;
211 reg = <0x00000000 0 0 0 0>;
212 #address-cells = <3>;
217 compatible = "pci168c,0040";
218 reg = <0x00010000 0 0 0 0>;
220 nvmem-cells = <&macaddr_art_6>, <&precal_art_5000>;
221 nvmem-cell-names = "mac-address", "pre-calibration";
222 mac-address-increment = <(2)>;
229 reset-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_HIGH>;
230 pinctrl-0 = <&pcie2_pins>;
231 pinctrl-names = "default";
237 pinctrl-0 = <&nand_pins>;
238 pinctrl-names = "default";
240 #address-cells = <1>;
245 compatible = "qcom,nandcs";
247 nand-ecc-strength = <4>;
248 nand-bus-width = <8>;
249 nand-ecc-step-size = <512>;
252 qcom,boot_pages_size = <0x1180000>;
255 compatible = "fixed-partitions";
256 #address-cells = <1>;
261 reg = <0x0000000 0x0c80000>;
267 reg = <0x0c80000 0x0500000>;
273 reg = <0x1180000 0x0080000>;
279 reg = <0x1200000 0x0140000>;
281 compatible = "nvmem-cells";
282 #address-cells = <1>;
285 macaddr_art_0: macaddr@0 {
289 macaddr_art_6: macaddr@6 {
293 precal_art_1000: precal@1000 {
294 reg = <0x1000 0x2f20>;
297 precal_art_5000: precal@5000 {
298 reg = <0x5000 0x2f20>;
302 artbak: art@1340000 {
304 reg = <0x1340000 0x0140000>;
310 reg = <0x1480000 0x0400000>;
315 reg = <0x1880000 0x6080000>;
320 reg = <0x7900000 0x0700000>;
330 pinctrl-0 = <&mdio0_pins>;
331 pinctrl-names = "default";
333 phy0: ethernet-phy@0 {
335 qca,ar8327-initvals = <
336 0x00004 0x7600000 /* PAD0_MODE */
337 0x00008 0x1000000 /* PAD5_MODE */
338 0x0000c 0x80 /* PAD6_MODE */
339 0x000e4 0x6a545 /* MAC_POWER_SEL */
340 0x000e0 0xc74164de /* SGMII_CTRL */
341 0x0007c 0x4e /* PORT0_STATUS */
342 0x00094 0x4e /* PORT6_STATUS */
346 phy4: ethernet-phy@4 {
356 pinctrl-0 = <&rgmii2_pins>;
357 pinctrl-names = "default";
359 nvmem-cells = <&macaddr_art_6>;
360 nvmem-cell-names = "mac-address";
373 nvmem-cells = <&macaddr_art_0>;
374 nvmem-cell-names = "mac-address";