1 #include "qcom-ipq8064-eax500.dtsi"
4 model = "Linksys EA8500 WiFi Router";
5 compatible = "linksys,ea8500", "qcom,ipq8064";
8 reg = <0x42000000 0x1e000000>;
9 device_type = "memory";
15 led-boot = &led_power;
16 led-failsafe = &led_power;
17 led-running = &led_power;
18 led-upgrade = &led_power;
22 compatible = "gpio-keys";
23 pinctrl-0 = <&button_pins>;
24 pinctrl-names = "default";
28 gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
29 linux,code = <KEY_RFKILL>;
30 debounce-interval = <60>;
36 gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
37 linux,code = <KEY_RESTART>;
38 debounce-interval = <60>;
44 gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
45 linux,code = <KEY_WPS_BUTTON>;
46 debounce-interval = <60>;
52 compatible = "gpio-leds";
53 pinctrl-0 = <&led_pins>;
54 pinctrl-names = "default";
57 function = LED_FUNCTION_WPS;
58 color = <LED_COLOR_ID_GREEN>;
59 gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
63 function = LED_FUNCTION_POWER;
64 color = <LED_COLOR_ID_WHITE>;
65 gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
66 default-state = "keep";
71 gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
77 button_pins: button_pins {
79 pins = "gpio65", "gpio67", "gpio68";
88 pins = "gpio6", "gpio53", "gpio54";
107 reg = <0x5f80000 0x2080000>;
112 qcom,phy_mdio_addr = <4>;
113 qcom,poll_required = <1>;
114 qcom,rgmii_delay = <0>;
115 qcom,emulation = <0>;
120 qcom,phy_mdio_addr = <0>; /* none */
121 qcom,poll_required = <0>; /* no polling */
122 qcom,rgmii_delay = <0>;
123 qcom,emulation = <0>;
124 #include <dt-bindings/leds/common.h>