1 #include <dt-bindings/leds/common.h>
3 #include "qcom-ipq8064-eax500.dtsi"
6 model = "Linksys EA8500 WiFi Router";
7 compatible = "linksys,ea8500", "qcom,ipq8064";
10 reg = <0x42000000 0x1e000000>;
11 device_type = "memory";
17 led-boot = &led_power;
18 led-failsafe = &led_power;
19 led-running = &led_power;
20 led-upgrade = &led_power;
24 compatible = "gpio-keys";
25 pinctrl-0 = <&button_pins>;
26 pinctrl-names = "default";
30 gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
31 linux,code = <KEY_RFKILL>;
32 debounce-interval = <60>;
38 gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
39 linux,code = <KEY_RESTART>;
40 debounce-interval = <60>;
46 gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
47 linux,code = <KEY_WPS_BUTTON>;
48 debounce-interval = <60>;
54 compatible = "gpio-leds";
55 pinctrl-0 = <&led_pins>;
56 pinctrl-names = "default";
59 function = LED_FUNCTION_WPS;
60 color = <LED_COLOR_ID_GREEN>;
61 gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
65 function = LED_FUNCTION_POWER;
66 color = <LED_COLOR_ID_WHITE>;
67 gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
68 default-state = "keep";
73 gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
79 button_pins: button_pins {
81 pins = "gpio65", "gpio67", "gpio68";
90 pins = "gpio6", "gpio53", "gpio54";
109 reg = <0x5f80000 0x2080000>;
114 qcom,phy_mdio_addr = <4>;
115 qcom,poll_required = <1>;
116 qcom,rgmii_delay = <0>;
117 qcom,emulation = <0>;
122 qcom,phy_mdio_addr = <0>; /* none */
123 qcom,poll_required = <0>; /* no polling */
124 qcom,rgmii_delay = <0>;
125 qcom,emulation = <0>;