1 #include "qcom-ipq8064-v2.0.dtsi"
3 #include <dt-bindings/input/input.h>
6 model = "NEC Aterm WG2600HP";
7 compatible = "nec,wg2600hp", "qcom,ipq8064";
10 reg = <0x42000000 0x1e000000>;
11 device_type = "memory";
17 led-boot = &power_green;
18 led-failsafe = &power_red;
19 led-running = &power_green;
20 led-upgrade = &power_green;
24 compatible = "gpio-keys";
25 pinctrl-0 = <&button_pins>;
26 pinctrl-names = "default";
30 gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
31 linux,code = <KEY_WPS_BUTTON>;
32 debounce-interval = <60>;
38 gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
39 linux,code = <KEY_RESTART>;
40 debounce-interval = <60>;
46 gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
48 linux,input-type = <EV_SW>;
49 debounce-interval = <60>;
55 gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
57 linux,input-type = <EV_SW>;
58 debounce-interval = <60>;
64 compatible = "gpio-leds";
65 pinctrl-0 = <&led_pins>;
66 pinctrl-names = "default";
69 label = "green:converter";
70 gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
73 power_red: power_red {
75 gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
79 label = "green:active";
80 gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
85 gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
88 power_green: power_green {
89 label = "green:power";
90 gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>;
94 label = "red:converter";
95 gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
99 label = "green:wlan2g";
100 gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
104 label = "red:wlan2g";
105 gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
109 label = "green:wlan5g";
110 gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
114 label = "red:wlan5g";
115 gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>;
120 gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
125 gpios = <&qcom_pinmux 65 GPIO_ACTIVE_HIGH>;
141 pinctrl-0 = <&mdio0_pins>;
142 pinctrl-names = "default";
146 qca,ar8327-initvals = <
147 0x00004 0x06000000 /* PAD0_MODE */
148 0x0000c 0x00080080 /* PAD6_MODE */
149 0x000e4 0x0006a545 /* MAC_POWER_SEL */
150 0x000e0 0xc74164de /* SGMII_CTRL */
151 0x0007c 0x0000004e /* PORT0_STATUS */
152 0x00094 0x0000004e /* PORT6_STATUS */
167 pinctrl-0 = <&rgmii2_pins>;
168 pinctrl-names = "default";
170 mtd-mac-address = <&PRODUCTDATA 6>;
184 mtd-mac-address = <&PRODUCTDATA 0>;
195 qcom,mode = <GSBI_PROT_SPI>;
200 pinctrl-0 = <&spi_pins>;
201 pinctrl-names = "default";
203 cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
206 compatible = "jedec,spi-nor";
207 spi-max-frequency = <50000000>;
211 compatible = "fixed-partitions";
212 #address-cells = <1>;
223 reg = <0x20000 0x20000>;
229 reg = <0x40000 0x40000>;
235 reg = <0x80000 0x80000>;
241 reg = <0x100000 0x10000>;
247 reg = <0x110000 0x10000>;
253 reg = <0x120000 0x80000>;
259 reg = <0x1a0000 0x80000>;
265 reg = <0x220000 0x80000>;
271 reg = <0x2a0000 0x10000>;
274 PRODUCTDATA: PRODUCTDATA@2b0000 {
275 label = "PRODUCTDATA";
276 reg = <0x2b0000 0x30000>;
282 reg = <0x2e0000 0x40000>;
288 reg = <0x320000 0x40000>;
294 reg = <0x360000 0x500000>;
299 compatible = "denx,uimage";
301 reg = <0x860000 0x17a0000>;
311 pinctrl-0 = <&usb_pwr_en_pins>;
312 pinctrl-names = "default";
325 max-link-speed = <1>;
329 button_pins: button_pins {
331 pins = "gpio16", "gpio54", "gpio24", "gpio25";
333 drive-strength = <2>;
340 pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio14",
341 "gpio15", "gpio55", "gpio56", "gpio57", "gpio58",
344 drive-strength = <2>;
351 pins = "gpio18", "gpio19", "gpio21";
357 pins = "gpio18", "gpio19";
358 drive-strength = <10>;
363 drive-strength = <10>;
369 drive-strength = <12>;
373 usb_pwr_en_pins: usb_pwr_en_pins {
377 drive-strength = <2>;