1 #include "qcom-ipq8064-v2.0.dtsi"
3 #include <dt-bindings/input/input.h>
6 model = "NEC Aterm WG2600HP";
7 compatible = "nec,wg2600hp", "qcom,ipq8064";
10 reg = <0x42000000 0x1e000000>;
11 device_type = "memory";
17 led-boot = &power_green;
18 led-failsafe = &power_red;
19 led-running = &power_green;
20 led-upgrade = &power_green;
24 compatible = "gpio-keys";
25 pinctrl-0 = <&button_pins>;
26 pinctrl-names = "default";
30 gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
31 linux,code = <KEY_WPS_BUTTON>;
32 debounce-interval = <60>;
38 gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
39 linux,code = <KEY_RESTART>;
40 debounce-interval = <60>;
46 gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
48 linux,input-type = <EV_SW>;
49 debounce-interval = <60>;
55 gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
57 linux,input-type = <EV_SW>;
58 debounce-interval = <60>;
64 compatible = "gpio-leds";
65 pinctrl-0 = <&led_pins>;
66 pinctrl-names = "default";
69 label = "green:converter";
70 gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
73 power_red: power_red {
75 gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
79 label = "green:active";
80 gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
85 gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
88 power_green: power_green {
89 label = "green:power";
90 gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>;
94 label = "red:converter";
95 gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
99 label = "green:wlan2g";
100 gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
104 label = "red:wlan2g";
105 gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
109 label = "green:wlan5g";
110 gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
114 label = "red:wlan5g";
115 gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>;
120 gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
125 gpios = <&qcom_pinmux 65 GPIO_ACTIVE_HIGH>;
141 pinctrl-0 = <&mdio0_pins>;
142 pinctrl-names = "default";
146 qca,ar8327-initvals = <
147 0x00004 0x06000000 /* PAD0_MODE */
148 0x0000c 0x00080080 /* PAD6_MODE */
149 0x000e4 0x0006a545 /* MAC_POWER_SEL */
150 0x000e0 0xc74164de /* SGMII_CTRL */
151 0x0007c 0x0000004e /* PORT0_STATUS */
152 0x00094 0x0000004e /* PORT6_STATUS */
167 pinctrl-0 = <&rgmii2_pins>;
168 pinctrl-names = "default";
170 nvmem-cells = <&macaddr_PRODUCTDATA_6>;
171 nvmem-cell-names = "mac-address";
185 nvmem-cells = <&macaddr_PRODUCTDATA_0>;
186 nvmem-cell-names = "mac-address";
197 qcom,mode = <GSBI_PROT_SPI>;
202 pinctrl-0 = <&spi_pins>;
203 pinctrl-names = "default";
205 cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
208 compatible = "jedec,spi-nor";
209 spi-max-frequency = <50000000>;
213 compatible = "fixed-partitions";
214 #address-cells = <1>;
225 reg = <0x20000 0x20000>;
231 reg = <0x40000 0x40000>;
237 reg = <0x80000 0x80000>;
243 reg = <0x100000 0x10000>;
249 reg = <0x110000 0x10000>;
255 reg = <0x120000 0x80000>;
261 reg = <0x1a0000 0x80000>;
267 reg = <0x220000 0x80000>;
273 reg = <0x2a0000 0x10000>;
276 PRODUCTDATA: PRODUCTDATA@2b0000 {
277 label = "PRODUCTDATA";
278 reg = <0x2b0000 0x30000>;
284 reg = <0x2e0000 0x40000>;
286 compatible = "nvmem-cells";
287 #address-cells = <1>;
290 precal_ART_1000: precal@1000 {
291 reg = <0x1000 0x2f20>;
294 precal_ART_5000: precal@5000 {
295 reg = <0x5000 0x2f20>;
301 reg = <0x320000 0x40000>;
307 reg = <0x360000 0x500000>;
312 compatible = "denx,uimage";
314 reg = <0x860000 0x17a0000>;
324 pinctrl-0 = <&usb_pwr_en_pins>;
325 pinctrl-names = "default";
336 reg = <0x00000000 0 0 0 0>;
337 #address-cells = <3>;
342 compatible = "pci168c,0040";
343 reg = <0x00010000 0 0 0 0>;
345 nvmem-cells = <&macaddr_PRODUCTDATA_12>, <&precal_ART_1000>;
346 nvmem-cell-names = "mac-address", "pre-calibration";
353 max-link-speed = <1>;
356 reg = <0x00000000 0 0 0 0>;
357 #address-cells = <3>;
362 compatible = "pci168c,0040";
363 reg = <0x00010000 0 0 0 0>;
365 nvmem-cells = <&macaddr_PRODUCTDATA_c>, <&precal_ART_5000>;
366 nvmem-cell-names = "mac-address", "pre-calibration";
372 button_pins: button_pins {
374 pins = "gpio16", "gpio54", "gpio24", "gpio25";
376 drive-strength = <2>;
383 pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio14",
384 "gpio15", "gpio55", "gpio56", "gpio57", "gpio58",
387 drive-strength = <2>;
394 pins = "gpio18", "gpio19", "gpio21";
400 pins = "gpio18", "gpio19";
401 drive-strength = <10>;
406 drive-strength = <10>;
412 drive-strength = <12>;
416 usb_pwr_en_pins: usb_pwr_en_pins {
420 drive-strength = <2>;
428 compatible = "nvmem-cells";
429 #address-cells = <1>;
432 macaddr_PRODUCTDATA_0: macaddr@0 {
436 macaddr_PRODUCTDATA_6: macaddr@6 {
440 macaddr_PRODUCTDATA_c: macaddr@c {
444 macaddr_PRODUCTDATA_12: macaddr@12 {