3 #include "skeleton.dtsi"
4 #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
5 #include <dt-bindings/clock/qcom,lcc-ipq806x.h>
6 #include <dt-bindings/mfd/qcom-rpm.h>
7 #include <dt-bindings/soc/qcom,gsbi.h>
8 #include <dt-bindings/reset/qcom,gcc-ipq806x.h>
9 #include <dt-bindings/interrupt-controller/arm-gic.h>
10 #include <dt-bindings/interrupt-controller/irq.h>
11 #include <dt-bindings/gpio/gpio.h>
14 model = "Qualcomm IPQ8065";
15 compatible = "qcom,ipq8065", "qcom,ipq8064";
16 interrupt-parent = <&intc>;
23 compatible = "qcom,krait";
24 enable-method = "qcom,kpss-acc-v1";
27 next-level-cache = <&L2>;
30 clocks = <&kraitcc 0>, <&kraitcc 4>;
31 clock-names = "cpu", "l2";
32 qcom,imem = <&qfprom>;
33 clock-latency = <100000>;
34 cpu-supply = <&smb208_s2a>;
35 voltage-tolerance = <5>;
36 cooling-min-state = <0>;
37 cooling-max-state = <10>;
39 cpu-idle-states = <&CPU_SPC>;
43 compatible = "qcom,krait";
44 enable-method = "qcom,kpss-acc-v1";
47 next-level-cache = <&L2>;
50 clocks = <&kraitcc 1>, <&kraitcc 4>;
51 clock-names = "cpu", "l2";
52 qcom,imem = <&qfprom>;
53 clock-latency = <100000>;
54 cpu-supply = <&smb208_s2b>;
55 cooling-min-state = <0>;
56 cooling-max-state = <10>;
58 cpu-idle-states = <&CPU_SPC>;
68 qcom,l2-rates = <384000000 1000000000 1200000000>;
73 compatible = "qcom,idle-state-spc",
75 entry-latency-us = <400>;
76 exit-latency-us = <900>;
77 min-residency-us = <3000>;
83 compatible = "qcom,krait-pmu";
84 interrupts = <1 10 0x304>;
93 reg = <0x40000000 0x1000000>;
98 reg = <0x41000000 0x200000>;
106 compatible = "fixed-clock";
108 clock-frequency = <25000000>;
112 compatible = "fixed-clock";
114 clock-frequency = <25000000>;
117 sleep_clk: sleep_clk {
118 compatible = "fixed-clock";
119 clock-frequency = <32768>;
124 kraitcc: clock-controller {
125 compatible = "qcom,krait-cc-v1";
131 qcom,speed0-pvs0-bin-v0 =
132 < 1725000000 1262500 >,
133 < 1400000000 1175000 >,
134 < 1000000000 1100000 >,
135 < 800000000 1050000 >,
136 < 600000000 1000000 >,
137 < 384000000 975000 >;
138 qcom,speed0-pvs1-bin-v0 =
139 < 1725000000 1262500 >,
140 < 1400000000 1175000 >,
141 < 1000000000 1100000 >,
142 < 800000000 1050000 >,
143 < 600000000 1000000 >,
144 < 384000000 950000 >;
145 qcom,speed0-pvs2-bin-v0 =
146 < 1725000000 1200000 >,
147 < 1400000000 1125000 >,
148 < 1000000000 1050000 >,
149 < 800000000 1000000 >,
150 < 600000000 950000 >,
151 < 384000000 925000 >;
152 qcom,speed0-pvs3-bin-v0 =
153 < 1725000000 1175000 >,
154 < 1400000000 1100000 >,
155 < 1000000000 1025000 >,
156 < 800000000 975000 >,
157 < 600000000 925000 >,
158 < 384000000 900000 >;
159 qcom,speed0-pvs4-bin-v0 =
160 < 1725000000 1150000 >,
161 < 1400000000 1075000 >,
162 < 1000000000 1000000 >,
163 < 800000000 950000 >,
164 < 600000000 900000 >,
165 < 384000000 875000 >;
166 qcom,speed0-pvs5-bin-v0 =
167 < 1725000000 1100000 >,
168 < 1400000000 1025000 >,
169 < 1000000000 950000 >,
170 < 800000000 900000 >,
171 < 600000000 850000 >,
172 < 384000000 825000 >;
173 qcom,speed0-pvs6-bin-v0 =
174 < 1725000000 1050000 >,
175 < 1400000000 975000 >,
176 < 1000000000 900000 >,
177 < 800000000 850000 >,
178 < 600000000 800000 >,
179 < 384000000 775000 >;
183 #address-cells = <1>;
186 compatible = "simple-bus";
189 compatible = "qcom,lpass-cpu";
191 clocks = <&lcc AHBIX_CLK>,
194 clock-names = "ahbix-clk",
197 interrupts = <0 85 1>;
198 interrupt-names = "lpass-irq-lpaif";
199 reg = <0x28100000 0x10000>;
200 reg-names = "lpass-lpaif";
203 qfprom: qfprom@700000 {
204 compatible = "qcom,qfprom", "syscon";
205 reg = <0x00700000 0x1000>;
206 #address-cells = <1>;
209 ranges = <0x0 0x00700000 0x1000>;
213 compatible = "qcom,rpm-ipq8064";
214 reg = <0x108000 0x1000>;
215 qcom,ipc = <&l2cc 0x8 2>;
217 interrupts = <0 19 0>,
220 interrupt-names = "ack",
224 #address-cells = <1>;
227 clocks = <&gcc RPM_MSG_RAM_H_CLK>;
230 rpmcc: clock-controller {
231 compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
236 compatible = "qcom,rpm-smb208-regulators";
239 regulator-min-microvolt = <1050000>;
240 regulator-max-microvolt = <1150000>;
241 qcom,switch-mode-frequency = <1200000>;
245 regulator-min-microvolt = <1050000>;
246 regulator-max-microvolt = <1150000>;
247 qcom,switch-mode-frequency = <1200000>;
251 regulator-min-microvolt = < 800000>;
252 regulator-max-microvolt = <1275000>;
253 qcom,switch-mode-frequency = <1200000>;
257 regulator-min-microvolt = < 800000>;
258 regulator-max-microvolt = <1275000>;
259 qcom,switch-mode-frequency = <1200000>;
265 compatible = "qcom,prng";
266 reg = <0x1a500000 0x200>;
267 clocks = <&gcc PRNG_CLK>;
268 clock-names = "core";
271 qcom,msm-imem@2A03F000 {
272 compatible = "qcom,msm-imem";
273 reg = <0x2A03F000 0x1000>; /* Address and size of IMEM */
274 ranges = <0x0 0x2A03F000 0x1000>;
275 #address-cells = <1>;
279 compatible = "qcom,msm-imem-download_mode";
284 compatible = "qcom,msm-imem-restart_reason";
289 compatible = "qcom,msm-imem-l2_dump_offset";
294 qcom_pinmux: pinmux@800000 {
295 compatible = "qcom,ipq8064-pinctrl";
296 reg = <0x800000 0x4000>;
300 interrupt-controller;
301 #interrupt-cells = <2>;
302 interrupts = <0 16 0x4>;
304 pcie0_pins: pcie0_pinmux {
307 function = "pcie1_rst";
308 drive-strength = <2>;
313 pcie1_pins: pcie1_pinmux {
316 function = "pcie2_rst";
317 drive-strength = <2>;
322 pcie2_pins: pcie2_pinmux {
325 function = "pcie3_rst";
326 drive-strength = <2>;
333 intc: interrupt-controller@2000000 {
334 compatible = "qcom,msm-qgic2";
335 interrupt-controller;
336 #interrupt-cells = <3>;
337 reg = <0x02000000 0x1000>,
342 compatible = "qcom,kpss-timer", "qcom,msm-timer";
343 interrupts = <1 1 0x301>,
348 reg = <0x0200a000 0x100>;
349 clock-frequency = <25000000>,
351 clocks = <&sleep_clk>;
352 clock-names = "sleep";
353 cpu-offset = <0x80000>;
356 acc0: clock-controller@2088000 {
357 compatible = "qcom,kpss-acc-v1";
358 reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
359 clock-output-names = "acpu0_aux";
362 acc1: clock-controller@2098000 {
363 compatible = "qcom,kpss-acc-v1";
364 reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
365 clock-output-names = "acpu1_aux";
368 l2cc: clock-controller@2011000 {
369 compatible = "qcom,kpss-gcc", "syscon";
370 reg = <0x2011000 0x1000>;
371 clock-output-names = "acpu_l2_aux";
374 saw0: regulator@2089000 {
375 compatible = "qcom,saw2", "syscon";
376 reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
380 saw1: regulator@2099000 {
381 compatible = "qcom,saw2", "syscon";
382 reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
386 saw_l2: regulator@02012000 {
387 compatible = "qcom,saw2", "syscon";
388 reg = <0x02012000 0x1000>;
392 sic_non_secure: sic-non-secure@12100000 {
393 compatible = "syscon";
394 reg = <0x12100000 0x10000>;
397 gsbi1: gsbi@12440000 {
398 compatible = "qcom,gsbi-v1.0.0";
400 reg = <0x12440000 0x100>;
401 clocks = <&gcc GSBI1_H_CLK>;
402 clock-names = "iface";
403 #address-cells = <1>;
408 syscon-tcsr = <&tcsr>;
410 uart1: serial@12450000 {
411 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
412 reg = <0x12450000 0x1000>,
414 interrupts = <0 193 0x0>;
415 clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
416 clock-names = "core", "iface";
421 compatible = "qcom,i2c-qup-v1.1.1";
422 reg = <0x12460000 0x1000>;
423 interrupts = <0 194 0>;
425 clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
426 clock-names = "core", "iface";
429 #address-cells = <1>;
435 gsbi2: gsbi@12480000 {
436 compatible = "qcom,gsbi-v1.0.0";
438 reg = <0x12480000 0x100>;
439 clocks = <&gcc GSBI2_H_CLK>;
440 clock-names = "iface";
441 #address-cells = <1>;
446 syscon-tcsr = <&tcsr>;
448 uart2: serial@12490000 {
449 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
450 reg = <0x12490000 0x1000>,
452 interrupts = <0 195 0x0>;
453 clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>;
454 clock-names = "core", "iface";
459 compatible = "qcom,i2c-qup-v1.1.1";
460 reg = <0x124a0000 0x1000>;
461 interrupts = <0 196 0>;
463 clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
464 clock-names = "core", "iface";
467 #address-cells = <1>;
473 gsbi4: gsbi@16300000 {
474 compatible = "qcom,gsbi-v1.0.0";
476 reg = <0x16300000 0x100>;
477 clocks = <&gcc GSBI4_H_CLK>;
478 clock-names = "iface";
479 #address-cells = <1>;
484 syscon-tcsr = <&tcsr>;
486 uart4: serial@16340000 {
487 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
488 reg = <0x16340000 0x1000>,
490 interrupts = <0 152 0x0>;
491 clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
492 clock-names = "core", "iface";
497 compatible = "qcom,i2c-qup-v1.1.1";
498 reg = <0x16380000 0x1000>;
499 interrupts = <0 153 0>;
501 clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
502 clock-names = "core", "iface";
505 #address-cells = <1>;
510 gsbi5: gsbi@1a200000 {
511 compatible = "qcom,gsbi-v1.0.0";
513 reg = <0x1a200000 0x100>;
514 clocks = <&gcc GSBI5_H_CLK>;
515 clock-names = "iface";
516 #address-cells = <1>;
521 syscon-tcsr = <&tcsr>;
523 uart5: serial@1a240000 {
524 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
525 reg = <0x1a240000 0x1000>,
527 interrupts = <0 154 0x0>;
528 clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
529 clock-names = "core", "iface";
534 compatible = "qcom,i2c-qup-v1.1.1";
535 reg = <0x1a280000 0x1000>;
536 interrupts = <0 155 0>;
538 clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
539 clock-names = "core", "iface";
542 #address-cells = <1>;
547 compatible = "qcom,spi-qup-v1.1.1";
548 reg = <0x1a280000 0x1000>;
549 interrupts = <0 155 0>;
551 clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
552 clock-names = "core", "iface";
555 #address-cells = <1>;
560 gsbi6: gsbi@16500000 {
561 compatible = "qcom,gsbi-v1.0.0";
563 reg = <0x16500000 0x100>;
564 clocks = <&gcc GSBI6_H_CLK>;
565 clock-names = "iface";
566 #address-cells = <1>;
571 syscon-tcsr = <&tcsr>;
573 uart6: serial@16540000 {
574 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
575 reg = <0x16540000 0x1000>,
577 interrupts = <0 156 0x0>;
578 clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
579 clock-names = "core", "iface";
584 compatible = "qcom,i2c-qup-v1.1.1";
585 reg = <0x16580000 0x1000>;
586 interrupts = <0 157 0>;
588 clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
589 clock-names = "core", "iface";
592 #address-cells = <1>;
597 compatible = "qcom,spi-qup-v1.1.1";
598 reg = <0x16580000 0x1000>;
599 interrupts = <0 157 0>;
601 clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
602 clock-names = "core", "iface";
605 #address-cells = <1>;
610 gsbi7: gsbi@16600000 {
611 compatible = "qcom,gsbi-v1.0.0";
613 reg = <0x16600000 0x100>;
614 clocks = <&gcc GSBI7_H_CLK>;
615 clock-names = "iface";
616 #address-cells = <1>;
621 syscon-tcsr = <&tcsr>;
623 uart7: serial@16640000 {
624 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
625 reg = <0x16640000 0x1000>,
627 interrupts = <0 158 0x0>;
628 clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
629 clock-names = "core", "iface";
634 compatible = "qcom,i2c-qup-v1.1.1";
635 reg = <0x16680000 0x1000>;
636 interrupts = <0 159 0>;
638 clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
639 clock-names = "core", "iface";
642 #address-cells = <1>;
648 sata_phy: sata-phy@1b400000 {
649 compatible = "qcom,ipq806x-sata-phy";
650 reg = <0x1b400000 0x200>;
652 clocks = <&gcc SATA_PHY_CFG_CLK>;
660 compatible = "qcom,ipq806x-ahci", "generic-ahci";
661 reg = <0x29000000 0x180>;
663 interrupts = <0 209 0x0>;
665 clocks = <&gcc SFAB_SATA_S_H_CLK>,
668 <&gcc SATA_RXOOB_CLK>,
669 <&gcc SATA_PMALIVE_CLK>;
670 clock-names = "slave_face", "iface", "core",
673 assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
674 assigned-clock-rates = <100000000>, <100000000>;
677 phy-names = "sata-phy";
682 compatible = "qcom,ssbi";
683 reg = <0x00500000 0x1000>;
684 qcom,controller-type = "pmic-arbiter";
687 gcc: clock-controller@900000 {
688 compatible = "qcom,gcc-ipq8064";
689 reg = <0x00900000 0x4000>;
692 #power-domain-cells = <1>;
695 lcc: clock-controller@28000000 {
696 compatible = "qcom,lcc-ipq8064";
697 reg = <0x28000000 0x1000>;
702 tcsr: syscon@1a400000 {
703 compatible = "qcom,tcsr-ipq8064", "syscon";
704 reg = <0x1a400000 0x100>;
707 tsens: tsens-ipq806x {
708 compatible = "qcom,ipq806x-tsens";
709 reg = <0x900000 0x3678>, <0x700000 0x420>;
710 reg-names = "tsens_physical", "tsens_eeprom_physical";
711 interrupts = <0 178 0>;
713 qcom,tsens_factor = <1000>;
714 qcom,slope = <1176 1176 1154 1176 1111 1132 1132 1199 1132 1199 1132>;
718 compatible = "qcom,msm-thermal";
719 qcom,sensor-id = <0>;
720 qcom,poll-ms = <250>;
721 qcom,limit-temp = <105>;
722 qcom,temp-hysteresis = <10>;
723 qcom,freq-step = <2>;
724 qcom,core-limit-temp = <115>;
725 qcom,core-temp-hysteresis = <10>;
726 qcom,core-control-mask = <0xe>;
729 sfpb_mutex_block: syscon@1200600 {
730 compatible = "syscon";
731 reg = <0x01200600 0x100>;
734 hs_phy_1: phy@100f8800 {
735 compatible = "qcom,dwc3-hs-usb-phy";
736 reg = <0x100f8800 0x30>;
737 clocks = <&gcc USB30_1_UTMI_CLK>;
744 ss_phy_1: phy@100f8830 {
745 compatible = "qcom,dwc3-ss-usb-phy";
746 reg = <0x100f8830 0x30>;
747 clocks = <&gcc USB30_1_MASTER_CLK>;
754 hs_phy_0: phy@110f8800 {
755 compatible = "qcom,dwc3-hs-usb-phy";
756 reg = <0x110f8800 0x30>;
757 clocks = <&gcc USB30_0_UTMI_CLK>;
764 ss_phy_0: phy@110f8830 {
765 compatible = "qcom,dwc3-ss-usb-phy";
766 reg = <0x110f8830 0x30>;
767 clocks = <&gcc USB30_0_MASTER_CLK>;
775 compatible = "qcom,dwc3";
776 #address-cells = <1>;
778 clocks = <&gcc USB30_0_MASTER_CLK>;
779 clock-names = "core";
784 resets = <&gcc USB30_0_MASTER_RESET>;
785 reset-names = "usb30_mstr_rst";
788 compatible = "snps,dwc3";
789 reg = <0x11000000 0xcd00>;
790 interrupts = <0 110 0x4>;
791 phys = <&hs_phy_0>, <&ss_phy_0>;
792 phy-names = "usb2-phy", "usb3-phy";
799 compatible = "qcom,dwc3";
800 #address-cells = <1>;
802 clocks = <&gcc USB30_1_MASTER_CLK>;
803 clock-names = "core";
810 compatible = "snps,dwc3";
811 reg = <0x10000000 0xcd00>;
812 interrupts = <0 205 0x4>;
813 phys = <&hs_phy_1>, <&ss_phy_1>;
814 phy-names = "usb2-phy", "usb3-phy";
820 pcie0: pci@1b500000 {
821 compatible = "qcom,pcie-v0";
822 reg = <0x1b500000 0x1000
825 0x0ff00000 0x100000>;
826 reg-names = "dbi", "elbi", "parf", "config";
828 linux,pci-domain = <0>;
829 bus-range = <0x00 0xff>;
831 #address-cells = <3>;
834 ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */
835 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
837 interrupts = <GIC_SPI 35 IRQ_TYPE_NONE>;
838 interrupt-names = "msi";
839 #interrupt-cells = <1>;
840 interrupt-map-mask = <0 0 0 0x7>;
841 interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
842 <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
843 <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
844 <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
846 clocks = <&gcc PCIE_A_CLK>,
850 <&gcc PCIE_ALT_REF_CLK>;
851 clock-names = "core", "iface", "phy", "aux", "ref";
853 assigned-clocks = <&gcc PCIE_ALT_REF_CLK>;
854 assigned-clock-rates = <100000000>;
856 resets = <&gcc PCIE_ACLK_RESET>,
857 <&gcc PCIE_HCLK_RESET>,
858 <&gcc PCIE_POR_RESET>,
859 <&gcc PCIE_PCI_RESET>,
860 <&gcc PCIE_PHY_RESET>,
861 <&gcc PCIE_EXT_RESET>;
862 reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
864 pinctrl-0 = <&pcie0_pins>;
865 pinctrl-names = "default";
867 perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
872 pcie1: pci@1b700000 {
873 compatible = "qcom,pcie-v0";
874 reg = <0x1b700000 0x1000
877 0x31f00000 0x100000>;
878 reg-names = "dbi", "elbi", "parf", "config";
880 linux,pci-domain = <1>;
881 bus-range = <0x00 0xff>;
883 #address-cells = <3>;
886 ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */
887 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
889 interrupts = <GIC_SPI 57 IRQ_TYPE_NONE>;
890 interrupt-names = "msi";
891 #interrupt-cells = <1>;
892 interrupt-map-mask = <0 0 0 0x7>;
893 interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
894 <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
895 <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
896 <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
898 clocks = <&gcc PCIE_1_A_CLK>,
900 <&gcc PCIE_1_PHY_CLK>,
901 <&gcc PCIE_1_AUX_CLK>,
902 <&gcc PCIE_1_ALT_REF_CLK>;
903 clock-names = "core", "iface", "phy", "aux", "ref";
905 assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>;
906 assigned-clock-rates = <100000000>;
908 resets = <&gcc PCIE_1_ACLK_RESET>,
909 <&gcc PCIE_1_HCLK_RESET>,
910 <&gcc PCIE_1_POR_RESET>,
911 <&gcc PCIE_1_PCI_RESET>,
912 <&gcc PCIE_1_PHY_RESET>,
913 <&gcc PCIE_1_EXT_RESET>;
914 reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
916 pinctrl-0 = <&pcie1_pins>;
917 pinctrl-names = "default";
919 perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
924 pcie2: pci@1b900000 {
925 compatible = "qcom,pcie-v0";
926 reg = <0x1b900000 0x1000
929 0x35f00000 0x100000>;
930 reg-names = "dbi", "elbi", "parf", "config";
932 linux,pci-domain = <2>;
933 bus-range = <0x00 0xff>;
935 #address-cells = <3>;
938 ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */
939 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
941 interrupts = <GIC_SPI 71 IRQ_TYPE_NONE>;
942 interrupt-names = "msi";
943 #interrupt-cells = <1>;
944 interrupt-map-mask = <0 0 0 0x7>;
945 interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
946 <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
947 <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
948 <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
950 clocks = <&gcc PCIE_2_A_CLK>,
952 <&gcc PCIE_2_PHY_CLK>,
953 <&gcc PCIE_2_AUX_CLK>,
954 <&gcc PCIE_2_ALT_REF_CLK>;
955 clock-names = "core", "iface", "phy", "aux", "ref";
957 assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>;
958 assigned-clock-rates = <100000000>;
960 resets = <&gcc PCIE_2_ACLK_RESET>,
961 <&gcc PCIE_2_HCLK_RESET>,
962 <&gcc PCIE_2_POR_RESET>,
963 <&gcc PCIE_2_PCI_RESET>,
964 <&gcc PCIE_2_PHY_RESET>,
965 <&gcc PCIE_2_EXT_RESET>;
966 reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
968 pinctrl-0 = <&pcie2_pins>;
969 pinctrl-names = "default";
971 perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
976 adm_dma: dma@18300000 {
977 compatible = "qcom,adm";
978 reg = <0x18300000 0x100000>;
979 interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>;
982 clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
983 clock-names = "core", "iface";
985 resets = <&gcc ADM0_RESET>,
986 <&gcc ADM0_PBUS_RESET>,
987 <&gcc ADM0_C0_RESET>,
988 <&gcc ADM0_C1_RESET>,
989 <&gcc ADM0_C2_RESET>;
990 reset-names = "clk", "pbus", "c0", "c1", "c2";
997 compatible = "qcom,ebi2-nandc";
998 reg = <0x1ac00000 0x800>;
1000 clocks = <&gcc EBI2_CLK>,
1001 <&gcc EBI2_AON_CLK>;
1002 clock-names = "core", "aon";
1004 dmas = <&adm_dma 3>;
1006 qcom,cmd-crci = <15>;
1007 qcom,data-crci = <3>;
1009 status = "disabled";
1012 nss_common: syscon@03000000 {
1013 compatible = "syscon";
1014 reg = <0x03000000 0x0000FFFF>;
1017 qsgmii_csr: syscon@1bb00000 {
1018 compatible = "syscon";
1019 reg = <0x1bb00000 0x000001FF>;
1022 gmac0: ethernet@37000000 {
1023 device_type = "network";
1024 compatible = "qcom,ipq806x-gmac", "snps,dwmac";
1025 reg = <0x37000000 0x200000>;
1026 interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
1027 interrupt-names = "macirq";
1029 qcom,nss-common = <&nss_common>;
1030 qcom,qsgmii-csr = <&qsgmii_csr>;
1032 clocks = <&gcc GMAC_CORE1_CLK>;
1033 clock-names = "stmmaceth";
1035 resets = <&gcc GMAC_CORE1_RESET>;
1036 reset-names = "stmmaceth";
1038 status = "disabled";
1041 gmac1: ethernet@37200000 {
1042 device_type = "network";
1043 compatible = "qcom,ipq806x-gmac", "snps,dwmac";
1044 reg = <0x37200000 0x200000>;
1045 interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
1046 interrupt-names = "macirq";
1048 qcom,nss-common = <&nss_common>;
1049 qcom,qsgmii-csr = <&qsgmii_csr>;
1051 clocks = <&gcc GMAC_CORE2_CLK>;
1052 clock-names = "stmmaceth";
1054 resets = <&gcc GMAC_CORE2_RESET>;
1055 reset-names = "stmmaceth";
1057 status = "disabled";
1060 gmac2: ethernet@37400000 {
1061 device_type = "network";
1062 compatible = "qcom,ipq806x-gmac", "snps,dwmac";
1063 reg = <0x37400000 0x200000>;
1064 interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
1065 interrupt-names = "macirq";
1067 qcom,nss-common = <&nss_common>;
1068 qcom,qsgmii-csr = <&qsgmii_csr>;
1070 clocks = <&gcc GMAC_CORE3_CLK>;
1071 clock-names = "stmmaceth";
1073 resets = <&gcc GMAC_CORE3_RESET>;
1074 reset-names = "stmmaceth";
1076 status = "disabled";
1079 gmac3: ethernet@37600000 {
1080 device_type = "network";
1081 compatible = "qcom,ipq806x-gmac", "snps,dwmac";
1082 reg = <0x37600000 0x200000>;
1083 interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
1084 interrupt-names = "macirq";
1086 qcom,nss-common = <&nss_common>;
1087 qcom,qsgmii-csr = <&qsgmii_csr>;
1089 clocks = <&gcc GMAC_CORE4_CLK>;
1090 clock-names = "stmmaceth";
1092 resets = <&gcc GMAC_CORE4_RESET>;
1093 reset-names = "stmmaceth";
1095 status = "disabled";
1098 /* Temporary fixed regulator */
1099 vsdcc_fixed: vsdcc-regulator {
1100 compatible = "regulator-fixed";
1101 regulator-name = "SDCC Power";
1102 regulator-min-microvolt = <3300000>;
1103 regulator-max-microvolt = <3300000>;
1104 regulator-always-on;
1107 sdcc1bam:dma@12402000 {
1108 compatible = "qcom,bam-v1.3.0";
1109 reg = <0x12402000 0x8000>;
1110 interrupts = <0 98 0>;
1111 clocks = <&gcc SDC1_H_CLK>;
1112 clock-names = "bam_clk";
1117 sdcc3bam:dma@12182000 {
1118 compatible = "qcom,bam-v1.3.0";
1119 reg = <0x12182000 0x8000>;
1120 interrupts = <0 96 0>;
1121 clocks = <&gcc SDC3_H_CLK>;
1122 clock-names = "bam_clk";
1128 compatible = "arm,amba-bus";
1129 #address-cells = <1>;
1132 sdcc1: sdcc@12400000 {
1133 status = "disabled";
1134 compatible = "arm,pl18x", "arm,primecell";
1135 arm,primecell-periphid = <0x00051180>;
1136 reg = <0x12400000 0x2000>;
1137 interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
1138 interrupt-names = "cmd_irq";
1139 clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
1140 clock-names = "mclk", "apb_pclk";
1142 max-frequency = <48000000>;
1146 vmmc-supply = <&vsdcc_fixed>;
1147 #dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
1148 #dma-names = "tx", "rx";
1151 sdcc3: sdcc@12180000 {
1152 compatible = "arm,pl18x", "arm,primecell";
1153 arm,primecell-periphid = <0x00051180>;
1154 status = "disabled";
1155 reg = <0x12180000 0x2000>;
1156 interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
1157 interrupt-names = "cmd_irq";
1158 clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
1159 clock-names = "mclk", "apb_pclk";
1163 max-frequency = <192000000>;
1166 vmmc-supply = <&vsdcc_fixed>;
1167 #dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
1168 #dma-names = "tx", "rx";
1173 sfpb_mutex: sfpb-mutex {
1174 compatible = "qcom,sfpb-mutex";
1175 syscon = <&sfpb_mutex_block 4 4>;
1177 #hwlock-cells = <1>;
1181 compatible = "qcom,smem";
1182 memory-region = <&smem>;
1183 hwlocks = <&sfpb_mutex 3>;