target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-r7800.dts

   1 #include "qcom-ipq8065.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         model = "Netgear Nighthawk X4S R7800";
   7         compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064";
   8
   9         memory@0 {
  10                 reg = <0x42000000 0x1e000000>;
  11                 device_type = "memory";
  12         };
  13
  14         reserved-memory {
  15                 #address-cells = <1>;
  16                 #size-cells = <1>;
  17                 ranges;
  18                 rsvd@41200000 {
  19                         reg = <0x41200000 0x300000>;
  20                         no-map;
  21                 };
  22
  23                 rsvd@5fe00000 {
  24                         reg = <0x5fe00000 0x200000>;
  25                         reusable;
  26                 };
  27         };
  28
  29         aliases {
  30                 serial0 = &gsbi4_serial;
  31                 mdio-gpio0 = &mdio0;
  32
  33                 led-boot = &power_white;
  34                 led-failsafe = &power_amber;
  35                 led-running = &power_white;
  36                 led-upgrade = &power_amber;
  37                 label-mac-device = &gmac2;
  38         };
  39
  40         chosen {
  41                 stdout-path = "serial0:115200n8";
  42         };
  43
  44         soc {
  45                 pinmux@800000 {
  46                         button_pins: button_pins {
  47                                 mux {
  48                                         pins = "gpio6", "gpio54", "gpio65";
  49                                         function = "gpio";
  50                                         drive-strength = <2>;
  51                                         bias-pull-up;
  52                                 };
  53                         };
  54
  55                         i2c4_pins: i2c4_pinmux {
  56                                 mux {
  57                                         pins = "gpio12", "gpio13";
  58                                         function = "gsbi4";
  59                                         drive-strength = <12>;
  60                                         bias-disable;
  61                                 };
  62                         };
  63
  64                         led_pins: led_pins {
  65                                 pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
  66                                         "gpio24","gpio26", "gpio53", "gpio64";
  67                                 function = "gpio";
  68                                 drive-strength = <2>;
  69                                 bias-pull-down;
  70                         };
  71
  72                         nand_pins: nand_pins {
  73                                 mux {
  74                                         pins = "gpio34", "gpio35", "gpio36",
  75                                                "gpio37", "gpio38", "gpio39",
  76                                                "gpio40", "gpio41", "gpio42",
  77                                                "gpio43", "gpio44", "gpio45",
  78                                                "gpio46", "gpio47";
  79                                         function = "nand";
  80                                         drive-strength = <10>;
  81                                         bias-disable;
  82                                 };
  83                                 pullups {
  84                                         pins = "gpio39";
  85                                         bias-pull-up;
  86                                 };
  87                                 hold {
  88                                         pins = "gpio40", "gpio41", "gpio42",
  89                                                "gpio43", "gpio44", "gpio45",
  90                                                "gpio46", "gpio47";
  91                                         bias-bus-hold;
  92                                 };
  93                         };
  94
  95                         mdio0_pins: mdio0_pins {
  96                                 mux {
  97                                         pins = "gpio0", "gpio1";
  98                                         function = "gpio";
  99                                         drive-strength = <8>;
 100                                         bias-disable;
 101                                 };
 102
 103                                 clk {
 104                                         pins = "gpio1";
 105                                         input-disable;
 106                                 };
 107                         };
 108
 109                         rgmii2_pins: rgmii2_pins {
 110                                 mux {
 111                                         pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
 112                                                "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
 113                                         function = "rgmii2";
 114                                         drive-strength = <8>;
 115                                         bias-disable;
 116                                 };
 117
 118                                 tx {
 119                                         pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
 120                                         input-disable;
 121                                 };
 122                         };
 123
 124                         spi_pins: spi_pins {
 125                                 mux {
 126                                         pins = "gpio18", "gpio19", "gpio21";
 127                                         function = "gsbi5";
 128                                         bias-pull-down;
 129                                 };
 130
 131                                 data {
 132                                         pins = "gpio18", "gpio19";
 133                                         drive-strength = <10>;
 134                                 };
 135
 136                                 cs {
 137                                         pins = "gpio20";
 138                                         drive-strength = <10>;
 139                                         bias-pull-up;
 140                                 };
 141
 142                                 clk {
 143                                         pins = "gpio21";
 144                                         drive-strength = <12>;
 145                                 };
 146                         };
 147
 148                         spi6_pins: spi6_pins {
 149                                 mux {
 150                                         pins = "gpio55", "gpio56", "gpio58";
 151                                         function = "gsbi6";
 152                                         bias-pull-down;
 153                                 };
 154
 155                                 mosi {
 156                                         pins = "gpio55";
 157                                         drive-strength = <12>;
 158                                 };
 159
 160                                 miso {
 161                                         pins = "gpio56";
 162                                         drive-strength = <14>;
 163                                 };
 164
 165                                 cs {
 166                                         pins = "gpio57";
 167                                         drive-strength = <12>;
 168                                         bias-pull-up;
 169                                 };
 170
 171                                 clk {
 172                                         pins = "gpio58";
 173                                         drive-strength = <12>;
 174                                 };
 175
 176                                 reset {
 177                                         pins = "gpio33";
 178                                         drive-strength = <10>;
 179                                         bias-pull-down;
 180                                         output-high;
 181                                 };
 182                         };
 183
 184                         usb0_pwr_en_pins: usb0_pwr_en_pins {
 185                                 mux {
 186                                         pins = "gpio15";
 187                                         function = "gpio";
 188                                         drive-strength = <12>;
 189                                         bias-pull-down;
 190                                         output-high;
 191                                 };
 192                         };
 193
 194                         usb1_pwr_en_pins: usb1_pwr_en_pins {
 195                                 mux {
 196                                         pins = "gpio16", "gpio68";
 197                                         function = "gpio";
 198                                         drive-strength = <12>;
 199                                         bias-pull-down;
 200                                         output-high;
 201                                 };
 202                         };
 203                 };
 204
 205                 gsbi@16300000 {
 206                         qcom,mode = <GSBI_PROT_I2C_UART>;
 207                         status = "okay";
 208                         serial@16340000 {
 209                                 status = "okay";
 210                         };
 211                         /*
 212                          * The i2c device on gsbi4 should not be enabled.
 213                          * On ipq806x designs gsbi4 i2c is meant for exclusive
 214                          * RPM usage. Turning this on in kernel manifests as
 215                          * i2c failure for the RPM.
 216                          */
 217                 };
 218
 219                 sata-phy@1b400000 {
 220                         status = "okay";
 221                 };
 222
 223                 sata@29000000 {
 224                         ports-implemented = <0x1>;
 225                         status = "okay";
 226                 };
 227
 228                 phy@100f8800 {          /* USB3 port 1 HS phy */
 229                         status = "okay";
 230                 };
 231
 232                 phy@100f8830 {          /* USB3 port 1 SS phy */
 233                         status = "okay";
 234                 };
 235
 236                 phy@110f8800 {          /* USB3 port 0 HS phy */
 237                         status = "okay";
 238                 };
 239
 240                 phy@110f8830 {          /* USB3 port 0 SS phy */
 241                         status = "okay";
 242                 };
 243
 244                 usb30@0 {
 245                         status = "okay";
 246
 247                         pinctrl-0 = <&usb0_pwr_en_pins>;
 248                         pinctrl-names = "default";
 249                 };
 250
 251                 usb30@1 {
 252                         status = "okay";
 253
 254                         pinctrl-0 = <&usb1_pwr_en_pins>;
 255                         pinctrl-names = "default";
 256                 };
 257
 258                 pcie0: pci@1b500000 {
 259                         status = "okay";
 260                 };
 261
 262                 pcie1: pci@1b700000 {
 263                         status = "okay";
 264                         force_gen1 = <1>;
 265                 };
 266
 267                 nand@1ac00000 {
 268                         status = "okay";
 269
 270                         pinctrl-0 = <&nand_pins>;
 271                         pinctrl-names = "default";
 272
 273                         cs0 {
 274                                 reg = <0>;
 275                                 compatible = "qcom,nandcs";
 276
 277                                 nand-ecc-strength = <4>;
 278                                 nand-bus-width = <8>;
 279                                 nand-ecc-step-size = <512>;
 280
 281                                 partitions {
 282                                         compatible = "fixed-partitions";
 283                                         #address-cells = <1>;
 284                                         #size-cells = <1>;
 285
 286                                         qcadata@0 {
 287                                                 label = "qcadata";
 288                                                 reg = <0x0000000 0x0c80000>;
 289                                                 read-only;
 290                                         };
 291
 292                                         APPSBL@c80000 {
 293                                                 label = "APPSBL";
 294                                                 reg = <0x0c80000 0x0500000>;
 295                                                 read-only;
 296                                         };
 297
 298                                         APPSBLENV@1180000 {
 299                                                 label = "APPSBLENV";
 300                                                 reg = <0x1180000 0x0080000>;
 301                                                 read-only;
 302                                         };
 303
 304                                         art: art@1200000 {
 305                                                 label = "art";
 306                                                 reg = <0x1200000 0x0140000>;
 307                                                 read-only;
 308                                         };
 309
 310                                         artbak: art@1340000 {
 311                                                 label = "artbak";
 312                                                 reg = <0x1340000 0x0140000>;
 313                                                 read-only;
 314                                         };
 315
 316                                         kernel@1480000 {
 317                                                 label = "kernel";
 318                                                 reg = <0x1480000 0x0400000>;
 319                                         };
 320
 321                                         ubi@1880000 {
 322                                                 label = "ubi";
 323                                                 reg = <0x1880000 0x6080000>;
 324                                         };
 325
 326                                         reserve@7900000 {
 327                                                 label = "reserve";
 328                                                 reg = <0x7900000 0x0700000>;
 329                                                 read-only;
 330                                         };
 331                                 };
 332                         };
 333                 };
 334
 335                 mdio0: mdio {
 336                         compatible = "virtual,mdio-gpio";
 337                         #address-cells = <1>;
 338                         #size-cells = <0>;
 339                         gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
 340                         pinctrl-0 = <&mdio0_pins>;
 341                         pinctrl-names = "default";
 342
 343
 344                         phy0: ethernet-phy@0 {
 345                                 reg = <0>;
 346                                 qca,ar8327-initvals = <
 347                                         0x00004 0x7600000   /* PAD0_MODE */
 348                                         0x00008 0x1000000   /* PAD5_MODE */
 349                                         0x0000c 0x80        /* PAD6_MODE */
 350                                         0x000e4 0xaa545     /* MAC_POWER_SEL */
 351                                         0x000e0 0xc74164de  /* SGMII_CTRL */
 352                                         0x0007c 0x4e        /* PORT0_STATUS */
 353                                         0x00094 0x4e        /* PORT6_STATUS */
 354                                         0x00970 0x1e864443  /* QM_PORT0_CTRL0 */
 355                                         0x00974 0x000001c6  /* QM_PORT0_CTRL1 */
 356                                         0x00978 0x19008643  /* QM_PORT1_CTRL0 */
 357                                         0x0097c 0x000001c6  /* QM_PORT1_CTRL1 */
 358                                         0x00980 0x19008643  /* QM_PORT2_CTRL0 */
 359                                         0x00984 0x000001c6  /* QM_PORT2_CTRL1 */
 360                                         0x00988 0x19008643  /* QM_PORT3_CTRL0 */
 361                                         0x0098c 0x000001c6  /* QM_PORT3_CTRL1 */
 362                                         0x00990 0x19008643  /* QM_PORT4_CTRL0 */
 363                                         0x00994 0x000001c6  /* QM_PORT4_CTRL1 */
 364                                         0x00998 0x1e864443  /* QM_PORT5_CTRL0 */
 365                                         0x0099c 0x000001c6  /* QM_PORT5_CTRL1 */
 366                                         0x009a0 0x1e864443  /* QM_PORT6_CTRL0 */
 367                                         0x009a4 0x000001c6  /* QM_PORT6_CTRL1 */
 368                                         >;
 369                                 qca,ar8327-vlans = <
 370                                         0x1     0x5e        /* VLAN1 Ports 1/2/3/4/6 */
 371                                         0x2     0x21        /* VLAN2 Ports 0/5 */
 372                                 >;
 373                         };
 374
 375                         phy4: ethernet-phy@4 {
 376                                 reg = <4>;
 377                                 qca,ar8327-initvals = <
 378                                         0x000e4 0x6a545     /* MAC_POWER_SEL */
 379                                         0x0000c 0x80        /* PAD6_MODE */
 380                                         >;
 381                         };
 382                 };
 383
 384                 gmac1: ethernet@37200000 {
 385                         status = "okay";
 386                         phy-mode = "rgmii";
 387                         qcom,id = <1>;
 388                         qcom,phy_mdio_addr = <4>;
 389                         qcom,poll_required = <0>;
 390                         qcom,rgmii_delay = <1>;
 391                         qcom,phy_mii_type = <0>;
 392                         qcom,emulation = <0>;
 393                         qcom,irq = <255>;
 394                         mdiobus = <&mdio0>;
 395
 396                         pinctrl-0 = <&rgmii2_pins>;
 397                         pinctrl-names = "default";
 398
 399                         mtd-mac-address = <&art 6>;
 400
 401                         fixed-link {
 402                                 speed = <1000>;
 403                                 full-duplex;
 404                         };
 405                 };
 406
 407                 gmac2: ethernet@37400000 {
 408                         status = "okay";
 409                         phy-mode = "sgmii";
 410                         qcom,id = <2>;
 411                         qcom,phy_mdio_addr = <0>;       /* none */
 412                         qcom,poll_required = <0>;       /* no polling */
 413                         qcom,rgmii_delay = <0>;
 414                         qcom,phy_mii_type = <1>;
 415                         qcom,emulation = <0>;
 416                         qcom,irq = <258>;
 417                         mdiobus = <&mdio0>;
 418
 419                         mtd-mac-address = <&art 0>;
 420
 421                         fixed-link {
 422                                 speed = <1000>;
 423                                 full-duplex;
 424                         };
 425                 };
 426         };
 427
 428         keys {
 429                 compatible = "gpio-keys";
 430                 pinctrl-0 = <&button_pins>;
 431                 pinctrl-names = "default";
 432
 433                 wifi {
 434                         label = "wifi";
 435                         gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
 436                         linux,code = <KEY_RFKILL>;
 437                         debounce-interval = <60>;
 438                         wakeup-source;
 439                 };
 440
 441                 reset {
 442                         label = "reset";
 443                         gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
 444                         linux,code = <KEY_RESTART>;
 445                         debounce-interval = <60>;
 446                         wakeup-source;
 447                 };
 448
 449                 wps {
 450                         label = "wps";
 451                         gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
 452                         linux,code = <KEY_WPS_BUTTON>;
 453                         debounce-interval = <60>;
 454                         wakeup-source;
 455                 };
 456         };
 457
 458         leds {
 459                 compatible = "gpio-leds";
 460                 pinctrl-0 = <&led_pins>;
 461                 pinctrl-names = "default";
 462
 463                 power_white: power_white {
 464                         label = "r7800:white:power";
 465                         gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
 466                         default-state = "keep";
 467                 };
 468
 469                 power_amber: power_amber {
 470                         label = "r7800:amber:power";
 471                         gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
 472                 };
 473
 474                 wan_white {
 475                         label = "r7800:white:wan";
 476                         gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
 477                 };
 478
 479                 wan_amber {
 480                         label = "r7800:amber:wan";
 481                         gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
 482                 };
 483
 484                 usb1 {
 485                         label = "r7800:white:usb1";
 486                         gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
 487                 };
 488
 489                 usb2 {
 490                         label = "r7800:white:usb2";
 491                         gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
 492                 };
 493
 494                 esata {
 495                         label = "r7800:white:esata";
 496                         gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
 497                 };
 498
 499                 wifi {
 500                         label = "r7800:white:wifi";
 501                         gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
 502                 };
 503
 504                 wps {
 505                         label = "r7800:white:wps";
 506                         gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
 507                 };
 508         };
 509 };
 510
 511 &adm_dma {
 512         status = "okay";
 513 };