1 #include "qcom-ipq8064-v1.0.dtsi"
4 model = "Qualcomm IPQ8064/DB149";
5 compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
8 serial0 = &gsbi2_serial;
16 reg = <0x41200000 0x300000>;
23 rgmii0_pins: rgmii0_pins {
25 pins = "gpio2", "gpio66";
33 qcom,mode = <GSBI_PROT_I2C_UART>;
36 gsbi2_serial: serial@12490000 {
53 label = "lowlevel_init";
59 reg = <0x1b0000 0x80000>;
64 reg = <0x230000 0x40000>;
69 reg = <0x270000 0x40000>;
74 reg = <0x2b0000 0x1d50000>;
117 pinctrl-0 = <&mdio0_pins>;
118 pinctrl-names = "default";
120 phy0: ethernet-phy@0 {
122 qca,ar8327-initvals = <
123 0x00004 0x7600000 /* PAD0_MODE */
124 0x00008 0x1000000 /* PAD5_MODE */
125 0x0000c 0x80 /* PAD6_MODE */
126 0x000e4 0x6a545 /* MAC_POWER_SEL */
127 0x000e0 0xc74164de /* SGMII_CTRL */
128 0x0007c 0x4e /* PORT0_STATUS */
129 0x00094 0x4e /* PORT6_STATUS */
133 phy4: ethernet-phy@4 {
137 phy6: ethernet-phy@6 {
141 phy7: ethernet-phy@7 {
150 phy-handle = <&phy4>;
152 pinctrl-0 = <&rgmii0_pins>;
153 pinctrl-names = "default";
171 phy-handle = <&phy6>;
178 phy-handle = <&phy7>;