1 #include "qcom-ipq8064-eax500.dtsi"
4 model = "Linksys EA8500 WiFi Router";
5 compatible = "linksys,ea8500", "qcom,ipq8064";
8 reg = <0x42000000 0x1e000000>;
9 device_type = "memory";
15 led-boot = &led_power;
16 led-failsafe = &led_power;
17 led-running = &led_power;
18 led-upgrade = &led_power;
22 compatible = "gpio-keys";
23 pinctrl-0 = <&button_pins>;
24 pinctrl-names = "default";
28 gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
29 linux,code = <KEY_RFKILL>;
34 gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
35 linux,code = <KEY_RESTART>;
40 gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
41 linux,code = <KEY_WPS_BUTTON>;
46 compatible = "gpio-leds";
47 pinctrl-0 = <&led_pins>;
48 pinctrl-names = "default";
52 gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
56 label = "white:power";
57 gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
58 default-state = "keep";
63 gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
69 button_pins: button_pins {
71 pins = "gpio65", "gpio67", "gpio68";
80 pins = "gpio6", "gpio53", "gpio54";
99 reg = <0x5f80000 0x2080000>;
104 phy4: ethernet-phy@4 {
110 qcom,phy_mdio_addr = <4>;
111 qcom,poll_required = <1>;
112 qcom,rgmii_delay = <0>;
113 qcom,emulation = <0>;
118 qcom,phy_mdio_addr = <0>; /* none */
119 qcom,poll_required = <0>; /* no polling */
120 qcom,rgmii_delay = <0>;
121 qcom,emulation = <0>;