1 #include "qcom-ipq8064-v1.0.dtsi"
4 model = "Qualcomm IPQ8064/DB149";
5 compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
8 serial0 = &gsbi2_serial;
16 reg = <0x41200000 0x300000>;
23 rgmii0_pins: rgmii0_pins {
25 pins = "gpio2", "gpio66";
33 qcom,mode = <GSBI_PROT_I2C_UART>;
36 gsbi2_serial: serial@12490000 {
53 label = "lowlevel_init";
59 reg = <0x1b0000 0x80000>;
64 reg = <0x230000 0x40000>;
69 reg = <0x270000 0x40000>;
74 reg = <0x2b0000 0x1d50000>;
117 pinctrl-0 = <&mdio0_pins>;
118 pinctrl-names = "default";
121 compatible = "qca,qca8337";
122 #address-cells = <1>;
127 #address-cells = <1>;
135 tx-internal-delay-ps = <1000>;
136 rx-internal-delay-ps = <1000>;
147 phy-mode = "internal";
148 phy-handle = <&phy_port1>;
154 phy-mode = "internal";
155 phy-handle = <&phy_port2>;
161 phy-mode = "internal";
162 phy-handle = <&phy_port3>;
168 phy-mode = "internal";
169 phy-handle = <&phy_port4>;
175 phy-mode = "internal";
176 phy-handle = <&phy_port5>;
197 #address-cells = <1>;
222 phy6: ethernet-phy@6 {
226 phy7: ethernet-phy@7 {
236 pinctrl-0 = <&rgmii0_pins>;
237 pinctrl-names = "default";
255 phy-handle = <&phy6>;
262 phy-handle = <&phy7>;