1 // SPDX-License-Identifier: GPL-2.0 OR MIT
3 #include "qcom-ipq8064-v2.0-smb208.dtsi"
7 device_type = "memory";
8 linux,usable-memory = <0x41500000 0x1ea00000>;
9 reg = <0x40000000 0x20000000>;
21 bootargs-append = " console=ttyMSM0,115200n8 ubi.mtd=ubi ubi.mtd=art";
26 mdio0_pins_active: mdio0_pins_active {
28 pins = "gpio0", "gpio1";
41 phy_active: phy_active {
43 pins = "gpio6", "gpio7";
51 uart1_pins: uart1_pins {
53 pins = "gpio51", "gpio52";
63 qcom,mode = <GSBI_PROT_UART_W_FC>;
68 pinctrl-0 = <&uart1_pins>;
69 pinctrl-names = "default";
76 /delete-property/ pinctrl-0;
77 /delete-property/ pinctrl-names;
78 /delete-property/ perst-gpios;
87 compatible = "qcom,ath10k";
89 reg = <0x10000 0 0 0 0>;
97 /delete-property/ pinctrl-0;
98 /delete-property/ pinctrl-names;
99 /delete-property/ perst-gpios;
103 #address-cells = <3>;
108 compatible = "qcom,ath10k";
110 reg = <0x10000 0 0 0 0>;
118 /delete-property/ pinctrl-0;
119 /delete-property/ pinctrl-names;
120 /delete-property/ perst-gpios;
124 #address-cells = <3>;
129 compatible = "qcom,ath10k";
131 reg = <0x10000 0 0 0 0>;
144 compatible = "qcom,nandcs";
148 nand-ecc-strength = <4>;
149 nand-bus-width = <8>;
150 nand-ecc-step-size = <512>;
153 qcom,boot-partitions = <0x0 0x2140000>;
156 compatible = "fixed-partitions";
157 #address-cells = <1>;
168 reg = <0x40000 0x140000>;
174 reg = <0x180000 0x140000>;
180 reg = <0x2c0000 0x280000>;
186 reg = <0x540000 0x120000>;
192 reg = <0x660000 0x120000>;
198 reg = <0x780000 0x280000>;
204 reg = <0xa00000 0x280000>;
210 reg = <0x1fc0000 0x180000>;
215 label = "bootkernel1";
216 reg = <0x21c0000 0xa80000>;
220 label = "bootkernel2";
221 reg = <0x2c40000 0xa80000>;
226 reg = <0x36c0000 0x46c0000>;
231 reg = <0x7d80000 0x200000>;