1 DEVICE_VARS
+= NETGEAR_BOARD_ID NETGEAR_HW_ID
2 DEVICE_VARS
+= TPLINK_BOARD_ID
4 define Device
/kernel-size-migration
5 DEVICE_COMPAT_VERSION
:= 2.0
6 DEVICE_COMPAT_MESSAGE
:= *** Kernel partition size has changed from earlier \
7 versions. You need to sysupgrade with the OpenWrt factory image and \
8 use the
force flag when image
check fails. Settings will be lost.
***
11 define Build
/buffalo-rootfs-cksum
13 echo
-ne
"\x$$(od -A n -t u1 $@ | tr -s ' ' '\n' | \
14 $(STAGING_DIR_HOST)/bin/awk '{s+=$$0}END{printf "%x
", 255-s%256}')"; \
18 define Build
/edimax-header
19 $(eval edimax_model
=$(word 1,$(1)))
21 $(STAGING_DIR_HOST
)/bin
/mkedimaximg \
22 -b
-s CSYS
-m
$(edimax_model
) \
23 -f
0x70000 -S
0x1200000 \
28 define Device
/DniImage
29 KERNEL_SUFFIX
:= -uImage
30 KERNEL
= kernel-bin | append-dtb | uImage none
36 IMAGE
/factory.img
:= append-kernel | pad-offset
$$$$(BLOCKSIZE
) 64 | \
37 append-uImage-fakehdr filesystem | pad-to
$$$$(KERNEL_SIZE
) | \
38 append-ubi | netgear-dni
39 IMAGE
/sysupgrade.bin
:= append-kernel | pad-offset
$$$$(BLOCKSIZE
) 64 | \
40 append-uImage-fakehdr filesystem | sysupgrade-tar kernel
=$$$$@ | \
44 define Device
/TpSafeImage
45 KERNEL_SUFFIX
:= -uImage
46 KERNEL
= kernel-bin | append-dtb | uImage none
50 IMAGE
/factory.bin
:= append-rootfs | tplink-safeloader factory
51 IMAGE
/sysupgrade.bin
:= append-rootfs | \
52 tplink-safeloader sysupgrade | append-metadata
55 define Device
/ZyXELImage
56 KERNEL_SUFFIX
:= -uImage
57 KERNEL
= kernel-bin | append-dtb | uImage none | \
58 pad-to
$$(KERNEL_SIZE
)
61 IMAGE
/factory.bin
:= append-rootfs | pad-rootfs | \
62 pad-to
$$$$(BLOCKSIZE
) | zyxel-ras-image separate-kernel
63 IMAGE
/sysupgrade.bin
/squashfs
:= append-rootfs | \
64 pad-to
$$$$(BLOCKSIZE
) | sysupgrade-tar rootfs
=$$$$@ | \
68 define Device
/arris_tr4400-v2
69 $(call Device
/LegacyImage
)
70 DEVICE_VENDOR
:= Arris
71 DEVICE_MODEL
:= TR4400
76 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct ath10k-firmware-qca99x0-ct
79 TARGET_DEVICES
+= arris_tr4400-v2
81 define Device
/askey_rt4230w-rev6
82 $(call Device
/LegacyImage
)
83 DEVICE_VENDOR
:= Askey
84 DEVICE_MODEL
:= RT4230W
85 DEVICE_VARIANT
:= REV6
89 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct
92 TARGET_DEVICES
+= askey_rt4230w-rev6
94 define Device
/asrock_g10
95 $(call Device
/FitImage
)
98 DEVICE_VENDOR
:= ASRock
103 DEVICE_PACKAGES
:= kmod-i2c-gpio ath10k-firmware-qca99x0-ct
104 IMAGE
/nand-factory.bin
:= append-ubi | edimax-header RN67
106 TARGET_DEVICES
+= asrock_g10
108 define Device
/buffalo_wxr-2533dhp
109 $(call Device
/LegacyImage
)
111 DEVICE_VENDOR
:= Buffalo
112 DEVICE_MODEL
:= WXR-2533DHP
117 IMAGE
/sysupgrade.bin
:= append-rootfs | buffalo-rootfs-cksum | \
118 sysupgrade-tar rootfs
=$$$$@ | append-metadata
119 DEVICE_PACKAGES
:= ath10k-firmware-qca99x0-ct
121 TARGET_DEVICES
+= buffalo_wxr-2533dhp
123 define Device
/compex_wpq864
124 $(call Device
/FitImage
)
125 $(call Device
/UbiFit
)
126 DEVICE_VENDOR
:= Compex
127 DEVICE_MODEL
:= WPQ864
131 DEVICE_PACKAGES
:= kmod-gpio-beeper
133 TARGET_DEVICES
+= compex_wpq864
135 define Device
/edgecore_ecw5410
136 $(call Device
/FitImage
)
137 $(call Device
/UbiFit
)
138 DEVICE_VENDOR
:= Edgecore
139 DEVICE_MODEL
:= ECW5410
143 DEVICE_DTS_CONFIG
:= config@v2.0
-ap160
144 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct \
145 ipq-wifi-edgecore_ecw5410
147 TARGET_DEVICES
+= edgecore_ecw5410
149 define Device
/linksys_ea7500-v1
150 $(call Device
/LegacyImage
)
151 $(Device
/kernel-size-migration
)
152 DEVICE_VENDOR
:= Linksys
153 DEVICE_MODEL
:= EA7500
159 KERNEL
= kernel-bin | append-dtb | uImage none | \
160 append-uImage-fakehdr filesystem
162 IMAGES
:= factory.bin sysupgrade.bin
163 IMAGE
/factory.bin
:= append-kernel | pad-to
$$$$(KERNEL_SIZE
) | \
164 append-ubi | pad-to
$$$$(PAGESIZE
)
165 DEVICE_PACKAGES
:= ath10k-firmware-qca99x0-ct
168 TARGET_DEVICES
+= linksys_ea7500-v1
170 define Device
/linksys_ea8500
171 $(call Device
/LegacyImage
)
172 $(Device
/kernel-size-migration
)
173 DEVICE_VENDOR
:= Linksys
174 DEVICE_MODEL
:= EA8500
179 KERNEL
= kernel-bin | append-dtb | uImage none | \
180 append-uImage-fakehdr filesystem
182 SUPPORTED_DEVICES
+= ea8500
184 IMAGES
+= factory.bin
185 IMAGE
/factory.bin
:= append-kernel | pad-to
$$$$(KERNEL_SIZE
) | \
187 DEVICE_PACKAGES
:= ath10k-firmware-qca99x0-ct
189 TARGET_DEVICES
+= linksys_ea8500
191 define Device
/meraki_mr42
192 $(call Device
/FitImage
)
193 DEVICE_VENDOR
:= Cisco Meraki
198 KERNEL_LOADADDR
= 0x44208000
199 DEVICE_PACKAGES
:= -swconfig
-kmod-ata-ahci
-kmod-ata-ahci-platform \
200 -kmod-usb-ohci
-kmod-usb2
-kmod-usb-ledtrig-usbport \
201 -kmod-phy-qcom-ipq806x-usb
-kmod-usb3
-kmod-usb-dwc3-qcom \
202 -uboot-envtools ath10k-firmware-qca9887-ct \
203 ath10k-firmware-qca99x0-ct kmod-eeprom-at24 kmod-hwmon-ina2xx \
206 TARGET_DEVICES
+= meraki_mr42
208 define Device
/meraki_mr52
209 $(call Device
/FitImage
)
210 DEVICE_VENDOR
:= Cisco Meraki
215 KERNEL_LOADADDR
= 0x44208000
216 DEVICE_DTS_CONFIG
:= config@
2
217 DEVICE_PACKAGES
:= -swconfig
-kmod-ata-ahci
-kmod-ata-ahci-platform \
218 -kmod-usb-ohci
-kmod-usb2
-kmod-usb-ledtrig-usbport \
219 -kmod-phy-qcom-ipq806x-usb
-kmod-usb3
-kmod-usb-dwc3-qcom \
220 -uboot-envtools ath10k-firmware-qca9887-ct \
221 ath10k-firmware-qca9984-ct kmod-eeprom-at24 kmod-hwmon-ina2xx \
224 TARGET_DEVICES
+= meraki_mr52
226 define Device
/nec_wg2600hp
227 $(call Device
/LegacyImage
)
229 DEVICE_MODEL
:= Aterm WG2600HP
232 BOARD_NAME
:= wg2600hp
233 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | \
234 pad-rootfs | append-metadata
235 DEVICE_PACKAGES
:= ath10k-firmware-qca99x0-ct
237 TARGET_DEVICES
+= nec_wg2600hp
239 define Device
/nec_wg2600hp3
240 $(call Device
/LegacyImage
)
241 DEVICE_VENDOR
:= NEC Platforms
242 DEVICE_MODEL
:= Aterm WG2600HP3
245 IMAGES
:= sysupgrade.bin
246 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | \
247 pad-rootfs | append-metadata
248 DEVICE_PACKAGES
:= -kmod-ata-ahci
-kmod-ata-ahci-platform \
249 -kmod-usb-ohci
-kmod-usb2
-kmod-usb-ledtrig-usbport \
250 -kmod-usb-phy-qcom-dwc3
-kmod-usb3
-kmod-usb-dwc3-qcom \
251 ath10k-firmware-qca9984-ct
253 TARGET_DEVICES
+= nec_wg2600hp3
255 define Device
/netgear_d7800
256 $(call Device
/DniImage
)
257 DEVICE_VENDOR
:= NETGEAR
258 DEVICE_MODEL
:= Nighthawk X4 D7800
261 NETGEAR_BOARD_ID
:= D7800
262 NETGEAR_HW_ID
:= 29764958+0+128+512+4x4
+4x4
266 SUPPORTED_DEVICES
+= d7800
267 DEVICE_PACKAGES
:= ath10k-firmware-qca99x0-ct
268 DEVICE_COMPAT_VERSION
:= 2.0
269 DEVICE_COMPAT_MESSAGE
:= Sysupgrade does not work due to rootfs ubi partition size change. \
270 Use factory image with the TFTP recovery flash routine.
272 TARGET_DEVICES
+= netgear_d7800
274 define Device
/netgear_r7500
275 $(call Device
/DniImage
)
276 DEVICE_VENDOR
:= NETGEAR
277 DEVICE_MODEL
:= Nighthawk X4 R7500
281 NETGEAR_BOARD_ID
:= R7500
282 NETGEAR_HW_ID
:= 29764841+0+128+256+3x3
+4x4
286 SUPPORTED_DEVICES
+= r7500
287 DEVICE_PACKAGES
:= ath10k-firmware-qca988x-ct
289 TARGET_DEVICES
+= netgear_r7500
291 define Device
/netgear_r7500v2
292 $(call Device
/DniImage
)
293 DEVICE_VENDOR
:= NETGEAR
294 DEVICE_MODEL
:= Nighthawk X4 R7500
298 NETGEAR_BOARD_ID
:= R7500v2
299 NETGEAR_HW_ID
:= 29764958+0+128+512+3x3
+4x4
302 BOARD_NAME
:= r7500v2
303 SUPPORTED_DEVICES
+= r7500v2
304 DEVICE_PACKAGES
:= ath10k-firmware-qca99x0-ct \
305 ath10k-firmware-qca988x-ct
307 TARGET_DEVICES
+= netgear_r7500v2
309 define Device
/netgear_r7800
310 $(call Device
/DniImage
)
311 DEVICE_VENDOR
:= NETGEAR
312 DEVICE_MODEL
:= Nighthawk X4S R7800
315 NETGEAR_BOARD_ID
:= R7800
316 NETGEAR_HW_ID
:= 29764958+0+128+512+4x4
+4x4
+cascade
320 SUPPORTED_DEVICES
+= r7800
321 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct kmod-ramoops
323 TARGET_DEVICES
+= netgear_r7800
325 define Device
/netgear_xr500
326 $(call Device
/DniImage
)
327 DEVICE_VENDOR
:= NETGEAR
328 DEVICE_MODEL
:= Nighthawk XR500
331 NETGEAR_BOARD_ID
:= XR500
332 NETGEAR_HW_ID
:= 29764958+0+256+512+4x4
+4x4
+cascade
335 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct kmod-ramoops
337 TARGET_DEVICES
+= netgear_xr500
339 define Device
/qcom_ipq8064-ap148
340 $(call Device
/FitImage
)
341 $(call Device
/UbiFit
)
342 DEVICE_VENDOR
:= Qualcomm
343 DEVICE_MODEL
:= AP148
344 DEVICE_VARIANT
:= standard
346 DEVICE_DTS
:= qcom-ipq8064-ap148
351 SUPPORTED_DEVICES
+= ap148
352 DEVICE_PACKAGES
:= ath10k-firmware-qca99x0-ct
354 TARGET_DEVICES
+= qcom_ipq8064-ap148
356 define Device
/qcom_ipq8064-ap148-legacy
357 $(call Device
/LegacyImage
)
358 $(call Device
/UbiFit
)
359 DEVICE_VENDOR
:= Qualcomm
360 DEVICE_MODEL
:= AP148
361 DEVICE_VARIANT
:= legacy
363 DEVICE_DTS
:= qcom-ipq8064-ap148
367 SUPPORTED_DEVICES
:= qcom
,ipq8064-ap148 ap148
368 DEVICE_PACKAGES
:= ath10k-firmware-qca99x0-ct
370 TARGET_DEVICES
+= qcom_ipq8064-ap148-legacy
372 define Device
/qcom_ipq8064-ap161
373 $(call Device
/FitImage
)
374 $(call Device
/UbiFit
)
375 DEVICE_VENDOR
:= Qualcomm
376 DEVICE_MODEL
:= AP161
378 DEVICE_DTS
:= qcom-ipq8064-ap161
383 DEVICE_PACKAGES
:= ath10k-firmware-qca99x0-ct
385 TARGET_DEVICES
+= qcom_ipq8064-ap161
387 define Device
/qcom_ipq8064-db149
388 $(call Device
/FitImage
)
389 DEVICE_VENDOR
:= Qualcomm
390 DEVICE_MODEL
:= DB149
392 DEVICE_DTS
:= qcom-ipq8064-db149
395 DEVICE_PACKAGES
:= ath10k-firmware-qca99x0-ct
397 TARGET_DEVICES
+= qcom_ipq8064-db149
399 define Device
/tplink_ad7200
400 $(call Device
/TpSafeImage
)
401 DEVICE_VENDOR
:= TP-Link
402 DEVICE_MODEL
:= AD7200
403 DEVICE_VARIANT
:= v1
/v2
404 DEVICE_ALT0_VENDOR
:= TP-Link
405 DEVICE_ALT0_MODEL
:= Talon AD7200
406 DEVICE_ALT0_VARIANT
:= v1
/v2
410 TPLINK_BOARD_ID
:= AD7200
411 DEVICE_PACKAGES
:= ath10k-firmware-qca99x0-ct kmod-wil6210
413 TARGET_DEVICES
+= tplink_ad7200
415 define Device
/tplink_c2600
416 $(call Device
/TpSafeImage
)
417 DEVICE_VENDOR
:= TP-Link
418 DEVICE_MODEL
:= Archer C2600
424 SUPPORTED_DEVICES
+= c2600
425 TPLINK_BOARD_ID
:= C2600
426 DEVICE_PACKAGES
:= ath10k-firmware-qca99x0-ct
428 TARGET_DEVICES
+= tplink_c2600
430 define Device
/tplink_vr2600v
431 DEVICE_VENDOR
:= TP-Link
432 DEVICE_MODEL
:= Archer VR2600v
434 KERNEL_SUFFIX
:= -uImage
435 KERNEL
= kernel-bin | append-dtb | uImage none
436 KERNEL_NAME
:= zImage
441 BOARD_NAME
:= vr2600v
442 SUPPORTED_DEVICES
+= vr2600v
443 DEVICE_PACKAGES
:= ath10k-firmware-qca99x0-ct
444 IMAGE
/sysupgrade.bin
:= pad-extra
512 | append-kernel | \
445 append-rootfs | pad-rootfs | append-metadata
447 TARGET_DEVICES
+= tplink_vr2600v
449 define Device
/ubnt_unifi-ac-hd
450 $(call Device
/FitImageLzma
)
451 DEVICE_VENDOR
:= Ubiquiti
452 DEVICE_MODEL
:= UniFi AC HD
456 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct
457 IMAGE
/sysupgrade.bin
:= append-kernel | pad-to
$$$$(BLOCKSIZE
) | \
458 append-rootfs | pad-rootfs | check-size | append-metadata
460 TARGET_DEVICES
+= ubnt_unifi-ac-hd
462 define Device
/zyxel_nbg6817
463 DEVICE_VENDOR
:= ZyXEL
464 DEVICE_MODEL
:= NBG6817
468 BOARD_NAME
:= nbg6817
470 RAS_ROOTFS_SIZE
:= 20934k
471 RAS_VERSION
:= "V1.99(OWRT.9999)C0"
472 SUPPORTED_DEVICES
+= nbg6817
473 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct e2fsprogs \
475 $(call Device
/ZyXELImage
)
477 TARGET_DEVICES
+= zyxel_nbg6817