1 DEVICE_VARS
+= NETGEAR_BOARD_ID NETGEAR_HW_ID
2 DEVICE_VARS
+= TPLINK_BOARD_ID
4 define Device
/kernel-size-migration
5 DEVICE_COMPAT_VERSION
:= 2.0
6 DEVICE_COMPAT_MESSAGE
:= *** Kernel partition size has changed from earlier \
7 versions. You need to sysupgrade with the OpenWrt factory image and \
8 use the
force flag when image
check fails. Settings will be lost.
***
11 define Build
/buffalo-rootfs-cksum
13 echo
-ne
"\x$$(od -A n -t u1 $@ | tr -s ' ' '\n' | \
14 $(STAGING_DIR_HOST)/bin/awk '{s+=$$0}END{printf "%x
", 255-s%256}')"; \
18 define Build
/edimax-header
19 $(eval edimax_model
=$(word 1,$(1)))
21 $(STAGING_DIR_HOST
)/bin
/mkedimaximg \
22 -b
-s CSYS
-m
$(edimax_model
) \
23 -f
0x70000 -S
0x1200000 \
28 define Device
/DniImage
29 KERNEL_SUFFIX
:= -uImage
30 KERNEL
= kernel-bin | append-dtb | uImage none
36 IMAGE
/factory.img
:= append-kernel | pad-offset
$$$$(BLOCKSIZE
) 64 | \
37 append-uImage-fakehdr filesystem | pad-to
$$$$(KERNEL_SIZE
) | \
38 append-ubi | netgear-dni
39 IMAGE
/sysupgrade.bin
:= append-kernel | pad-offset
$$$$(BLOCKSIZE
) 64 | \
40 append-uImage-fakehdr filesystem | sysupgrade-tar kernel
=$$$$@ | \
44 define Device
/TpSafeImage
45 KERNEL_SUFFIX
:= -uImage
46 KERNEL
= kernel-bin | append-dtb | uImage none
50 IMAGE
/factory.bin
:= append-rootfs | tplink-safeloader factory
51 IMAGE
/sysupgrade.bin
:= append-rootfs | \
52 tplink-safeloader sysupgrade | append-metadata
55 define Device
/ZyXELImage
56 KERNEL_SUFFIX
:= -uImage
57 KERNEL
= kernel-bin | append-dtb | uImage none | \
58 pad-to
$$(KERNEL_SIZE
)
61 IMAGE
/factory.bin
:= append-rootfs | pad-rootfs | \
62 pad-to
$$$$(BLOCKSIZE
) | zyxel-ras-image separate-kernel
63 IMAGE
/sysupgrade.bin
/squashfs
:= append-rootfs | \
64 pad-to
$$$$(BLOCKSIZE
) | sysupgrade-tar rootfs
=$$$$@ | \
68 define Device
/arris_tr4400-v2
69 $(call Device
/LegacyImage
)
70 DEVICE_VENDOR
:= Arris
71 DEVICE_MODEL
:= TR4400
76 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct ath10k-firmware-qca99x0-ct
79 TARGET_DEVICES
+= arris_tr4400-v2
81 define Device
/askey_rt4230w-rev6
82 $(call Device
/LegacyImage
)
83 DEVICE_VENDOR
:= Askey
84 DEVICE_MODEL
:= RT4230W
85 DEVICE_VARIANT
:= REV6
89 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct
92 TARGET_DEVICES
+= askey_rt4230w-rev6
94 define Device
/asrock_g10
95 $(call Device
/FitImage
)
98 DEVICE_VENDOR
:= ASRock
103 DEVICE_PACKAGES
:= kmod-i2c-gpio ath10k-firmware-qca99x0-ct
104 IMAGE
/nand-factory.bin
:= append-ubi | edimax-header RN67
106 TARGET_DEVICES
+= asrock_g10
108 define Device
/buffalo_wxr-2533dhp
109 $(call Device
/LegacyImage
)
111 DEVICE_VENDOR
:= Buffalo
112 DEVICE_MODEL
:= WXR-2533DHP
117 IMAGE
/sysupgrade.bin
:= append-rootfs | buffalo-rootfs-cksum | \
118 sysupgrade-tar rootfs
=$$$$@ | append-metadata
119 DEVICE_PACKAGES
:= ath10k-firmware-qca99x0-ct
121 TARGET_DEVICES
+= buffalo_wxr-2533dhp
123 define Device
/compex_wpq864
124 $(call Device
/FitImage
)
125 $(call Device
/UbiFit
)
126 DEVICE_VENDOR
:= Compex
127 DEVICE_MODEL
:= WPQ864
131 DEVICE_PACKAGES
:= kmod-gpio-beeper
133 TARGET_DEVICES
+= compex_wpq864
135 define Device
/edgecore_ecw5410
136 $(call Device
/FitImage
)
137 $(call Device
/UbiFit
)
138 DEVICE_VENDOR
:= Edgecore
139 DEVICE_MODEL
:= ECW5410
143 DEVICE_DTS_CONFIG
:= config@v2.0
-ap160
144 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct \
145 ipq-wifi-edgecore_ecw5410
147 TARGET_DEVICES
+= edgecore_ecw5410
149 define Device
/linksys_ea7500-v1
150 $(call Device
/LegacyImage
)
151 $(Device
/kernel-size-migration
)
152 DEVICE_VENDOR
:= Linksys
153 DEVICE_MODEL
:= EA7500
159 KERNEL
= kernel-bin | append-dtb | uImage none | \
160 append-uImage-fakehdr filesystem
162 IMAGES
:= factory.bin sysupgrade.bin
163 IMAGE
/factory.bin
:= append-kernel | pad-to
$$$$(KERNEL_SIZE
) | \
164 append-ubi | pad-to
$$$$(PAGESIZE
)
165 DEVICE_PACKAGES
:= ath10k-firmware-qca99x0-ct
167 TARGET_DEVICES
+= linksys_ea7500-v1
169 define Device
/linksys_ea8500
170 $(call Device
/LegacyImage
)
171 $(Device
/kernel-size-migration
)
172 DEVICE_VENDOR
:= Linksys
173 DEVICE_MODEL
:= EA8500
178 KERNEL
= kernel-bin | append-dtb | uImage none | \
179 append-uImage-fakehdr filesystem
181 SUPPORTED_DEVICES
+= ea8500
183 IMAGES
+= factory.bin
184 IMAGE
/factory.bin
:= append-kernel | pad-to
$$$$(KERNEL_SIZE
) | \
186 DEVICE_PACKAGES
:= ath10k-firmware-qca99x0-ct
188 TARGET_DEVICES
+= linksys_ea8500
190 define Device
/meraki_mr42
191 $(call Device
/FitImage
)
192 DEVICE_VENDOR
:= Cisco Meraki
197 KERNEL_LOADADDR
= 0x44208000
198 DEVICE_PACKAGES
:= -swconfig
-kmod-ata-ahci
-kmod-ata-ahci-platform \
199 -kmod-usb-ohci
-kmod-usb2
-kmod-usb-ledtrig-usbport \
200 -kmod-phy-qcom-ipq806x-usb
-kmod-usb3
-kmod-usb-dwc3-qcom \
201 -uboot-envtools ath10k-firmware-qca9887-ct \
202 ath10k-firmware-qca99x0-ct kmod-eeprom-at24 kmod-hwmon-ina2xx \
205 TARGET_DEVICES
+= meraki_mr42
207 define Device
/meraki_mr52
208 $(call Device
/FitImage
)
209 DEVICE_VENDOR
:= Cisco Meraki
214 KERNEL_LOADADDR
= 0x44208000
215 DEVICE_DTS_CONFIG
:= config@
2
216 DEVICE_PACKAGES
:= -swconfig
-kmod-ata-ahci
-kmod-ata-ahci-platform \
217 -kmod-usb-ohci
-kmod-usb2
-kmod-usb-ledtrig-usbport \
218 -kmod-phy-qcom-ipq806x-usb
-kmod-usb3
-kmod-usb-dwc3-qcom \
219 -uboot-envtools ath10k-firmware-qca9887-ct \
220 ath10k-firmware-qca9984-ct kmod-eeprom-at24 kmod-hwmon-ina2xx \
223 TARGET_DEVICES
+= meraki_mr52
225 define Device
/nec_wg2600hp
226 $(call Device
/LegacyImage
)
228 DEVICE_MODEL
:= Aterm WG2600HP
231 BOARD_NAME
:= wg2600hp
232 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | \
233 pad-rootfs | append-metadata
234 DEVICE_PACKAGES
:= ath10k-firmware-qca99x0-ct
236 TARGET_DEVICES
+= nec_wg2600hp
238 define Device
/nec_wg2600hp3
239 $(call Device
/LegacyImage
)
240 DEVICE_VENDOR
:= NEC Platforms
241 DEVICE_MODEL
:= Aterm WG2600HP3
244 IMAGES
:= sysupgrade.bin
245 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | \
246 pad-rootfs | append-metadata
247 DEVICE_PACKAGES
:= -kmod-ata-ahci
-kmod-ata-ahci-platform \
248 -kmod-usb-ohci
-kmod-usb2
-kmod-usb-ledtrig-usbport \
249 -kmod-usb-phy-qcom-dwc3
-kmod-usb3
-kmod-usb-dwc3-qcom \
250 ath10k-firmware-qca9984-ct
252 TARGET_DEVICES
+= nec_wg2600hp3
254 define Device
/netgear_d7800
255 $(call Device
/DniImage
)
256 DEVICE_VENDOR
:= NETGEAR
257 DEVICE_MODEL
:= Nighthawk X4 D7800
260 NETGEAR_BOARD_ID
:= D7800
261 NETGEAR_HW_ID
:= 29764958+0+128+512+4x4
+4x4
265 SUPPORTED_DEVICES
+= d7800
266 DEVICE_PACKAGES
:= ath10k-firmware-qca99x0-ct
267 DEVICE_COMPAT_VERSION
:= 2.0
268 DEVICE_COMPAT_MESSAGE
:= Sysupgrade does not work due to rootfs ubi partition size change. \
269 Use factory image with the TFTP recovery flash routine.
271 TARGET_DEVICES
+= netgear_d7800
273 define Device
/netgear_r7500
274 $(call Device
/DniImage
)
275 DEVICE_VENDOR
:= NETGEAR
276 DEVICE_MODEL
:= Nighthawk X4 R7500
280 NETGEAR_BOARD_ID
:= R7500
281 NETGEAR_HW_ID
:= 29764841+0+128+256+3x3
+4x4
285 SUPPORTED_DEVICES
+= r7500
286 DEVICE_PACKAGES
:= ath10k-firmware-qca988x-ct
288 TARGET_DEVICES
+= netgear_r7500
290 define Device
/netgear_r7500v2
291 $(call Device
/DniImage
)
292 DEVICE_VENDOR
:= NETGEAR
293 DEVICE_MODEL
:= Nighthawk X4 R7500
297 NETGEAR_BOARD_ID
:= R7500v2
298 NETGEAR_HW_ID
:= 29764958+0+128+512+3x3
+4x4
301 BOARD_NAME
:= r7500v2
302 SUPPORTED_DEVICES
+= r7500v2
303 DEVICE_PACKAGES
:= ath10k-firmware-qca99x0-ct \
304 ath10k-firmware-qca988x-ct
306 TARGET_DEVICES
+= netgear_r7500v2
308 define Device
/netgear_r7800
309 $(call Device
/DniImage
)
310 DEVICE_VENDOR
:= NETGEAR
311 DEVICE_MODEL
:= Nighthawk X4S R7800
314 NETGEAR_BOARD_ID
:= R7800
315 NETGEAR_HW_ID
:= 29764958+0+128+512+4x4
+4x4
+cascade
319 SUPPORTED_DEVICES
+= r7800
320 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct kmod-ramoops
322 TARGET_DEVICES
+= netgear_r7800
324 define Device
/netgear_xr500
325 $(call Device
/DniImage
)
326 DEVICE_VENDOR
:= NETGEAR
327 DEVICE_MODEL
:= Nighthawk XR500
330 NETGEAR_BOARD_ID
:= XR500
331 NETGEAR_HW_ID
:= 29764958+0+256+512+4x4
+4x4
+cascade
334 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct kmod-ramoops
336 TARGET_DEVICES
+= netgear_xr500
338 define Device
/qcom_ipq8064-ap148
339 $(call Device
/FitImage
)
340 $(call Device
/UbiFit
)
341 DEVICE_VENDOR
:= Qualcomm
342 DEVICE_MODEL
:= AP148
343 DEVICE_VARIANT
:= standard
345 DEVICE_DTS
:= qcom-ipq8064-ap148
350 SUPPORTED_DEVICES
+= ap148
351 DEVICE_PACKAGES
:= ath10k-firmware-qca99x0-ct
353 TARGET_DEVICES
+= qcom_ipq8064-ap148
355 define Device
/qcom_ipq8064-ap148-legacy
356 $(call Device
/LegacyImage
)
357 $(call Device
/UbiFit
)
358 DEVICE_VENDOR
:= Qualcomm
359 DEVICE_MODEL
:= AP148
360 DEVICE_VARIANT
:= legacy
362 DEVICE_DTS
:= qcom-ipq8064-ap148
366 SUPPORTED_DEVICES
:= qcom
,ipq8064-ap148 ap148
367 DEVICE_PACKAGES
:= ath10k-firmware-qca99x0-ct
369 TARGET_DEVICES
+= qcom_ipq8064-ap148-legacy
371 define Device
/qcom_ipq8064-ap161
372 $(call Device
/FitImage
)
373 $(call Device
/UbiFit
)
374 DEVICE_VENDOR
:= Qualcomm
375 DEVICE_MODEL
:= AP161
377 DEVICE_DTS
:= qcom-ipq8064-ap161
382 DEVICE_PACKAGES
:= ath10k-firmware-qca99x0-ct
384 TARGET_DEVICES
+= qcom_ipq8064-ap161
386 define Device
/qcom_ipq8064-db149
387 $(call Device
/FitImage
)
388 DEVICE_VENDOR
:= Qualcomm
389 DEVICE_MODEL
:= DB149
391 DEVICE_DTS
:= qcom-ipq8064-db149
394 DEVICE_PACKAGES
:= ath10k-firmware-qca99x0-ct
396 TARGET_DEVICES
+= qcom_ipq8064-db149
398 define Device
/tplink_ad7200
399 $(call Device
/TpSafeImage
)
400 DEVICE_VENDOR
:= TP-Link
401 DEVICE_MODEL
:= AD7200
402 DEVICE_VARIANT
:= v1
/v2
403 DEVICE_ALT0_VENDOR
:= TP-Link
404 DEVICE_ALT0_MODEL
:= Talon AD7200
405 DEVICE_ALT0_VARIANT
:= v1
/v2
409 TPLINK_BOARD_ID
:= AD7200
410 DEVICE_PACKAGES
:= ath10k-firmware-qca99x0-ct kmod-wil6210
412 TARGET_DEVICES
+= tplink_ad7200
414 define Device
/tplink_c2600
415 $(call Device
/TpSafeImage
)
416 DEVICE_VENDOR
:= TP-Link
417 DEVICE_MODEL
:= Archer C2600
423 SUPPORTED_DEVICES
+= c2600
424 TPLINK_BOARD_ID
:= C2600
425 DEVICE_PACKAGES
:= ath10k-firmware-qca99x0-ct
427 TARGET_DEVICES
+= tplink_c2600
429 define Device
/tplink_vr2600v
430 DEVICE_VENDOR
:= TP-Link
431 DEVICE_MODEL
:= Archer VR2600v
433 KERNEL_SUFFIX
:= -uImage
434 KERNEL
= kernel-bin | append-dtb | uImage none
435 KERNEL_NAME
:= zImage
440 BOARD_NAME
:= vr2600v
441 SUPPORTED_DEVICES
+= vr2600v
442 DEVICE_PACKAGES
:= ath10k-firmware-qca99x0-ct
443 IMAGE
/sysupgrade.bin
:= pad-extra
512 | append-kernel | \
444 append-rootfs | pad-rootfs | append-metadata
446 TARGET_DEVICES
+= tplink_vr2600v
448 define Device
/ubnt_unifi-ac-hd
449 $(call Device
/FitImageLzma
)
450 DEVICE_VENDOR
:= Ubiquiti
451 DEVICE_MODEL
:= UniFi AC HD
455 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct
456 IMAGE
/sysupgrade.bin
:= append-kernel | pad-to
$$$$(BLOCKSIZE
) | \
457 append-rootfs | pad-rootfs | check-size | append-metadata
459 TARGET_DEVICES
+= ubnt_unifi-ac-hd
461 define Device
/zyxel_nbg6817
462 DEVICE_VENDOR
:= ZyXEL
463 DEVICE_MODEL
:= NBG6817
467 BOARD_NAME
:= nbg6817
469 RAS_ROOTFS_SIZE
:= 20934k
470 RAS_VERSION
:= "V1.99(OWRT.9999)C0"
471 SUPPORTED_DEVICES
+= nbg6817
472 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct e2fsprogs \
474 $(call Device
/ZyXELImage
)
476 TARGET_DEVICES
+= zyxel_nbg6817