1 From f8d0939eca47f56449ec583810a6ff41a1caaa91 Mon Sep 17 00:00:00 2001
2 From: Thomas Pedersen <twp@codeaurora.org>
3 Date: Mon, 16 May 2016 17:58:54 -0700
4 Subject: [PATCH 05/37] arm: qcom: dts: Enable NAND node on IPQ8064 AP148
7 Original patch by Archit Taneja.
9 Enable the NAND controller node on the AP148 platform. Provide pinmux
12 Signed-off-by: Archit Taneja <architt@codeaurora.org>
13 Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
15 arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 42 ++++++++++++++++++++++++++++++
16 1 file changed, 42 insertions(+)
18 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
19 +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
24 + nand_pins: nand_pins {
26 + pins = "gpio34", "gpio35", "gpio36",
27 + "gpio37", "gpio38", "gpio39",
28 + "gpio40", "gpio41", "gpio42",
29 + "gpio43", "gpio44", "gpio45",
32 + drive-strength = <10>;
40 + pins = "gpio40", "gpio41", "gpio42",
41 + "gpio43", "gpio44", "gpio45",
50 ports-implemented = <0x1>;
57 + pinctrl-0 = <&nand_pins>;
58 + pinctrl-names = "default";
61 + compatible = "qcom,nandcs";
64 + nand-ecc-strength = <4>;
65 + nand-ecc-step-size = <512>;
66 + nand-bus-width = <8>;