1 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
2 +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
9 compatible = "qcom,krait";
10 enable-method = "qcom,kpss-acc-v1";
18 compatible = "qcom,krait";
19 enable-method = "qcom,kpss-acc-v1";
26 + smem: smem@41000000 {
27 reg = <0x41000000 0x200000>;
31 gpio-ranges = <&qcom_pinmux 0 0 69>;
34 + #address-cells = <0>;
35 #interrupt-cells = <2>;
36 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
39 intc: interrupt-controller@2000000 {
40 compatible = "qcom,msm-qgic2";
42 + #address-cells = <0>;
43 #interrupt-cells = <3>;
44 reg = <0x02000000 0x1000>,
47 acc0: clock-controller@2088000 {
48 compatible = "qcom,kpss-acc-v1";
49 reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
50 + clock-output-names = "acpu0_aux";
53 acc1: clock-controller@2098000 {
54 compatible = "qcom,kpss-acc-v1";
55 reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
56 + clock-output-names = "acpu1_aux";
59 saw0: regulator@2089000 {
60 - compatible = "qcom,saw2";
61 + compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
62 reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
66 saw1: regulator@2099000 {
67 - compatible = "qcom,saw2";
68 + compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
69 reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
74 syscon-tcsr = <&tcsr>;
77 + gsbi2_serial: serial@12490000 {
78 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
79 reg = <0x12490000 0x1000>,
86 + gsbi2_i2c: i2c@124a0000 {
87 compatible = "qcom,i2c-qup-v1.1.1";
88 reg = <0x124a0000 0x1000>;
89 interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
92 syscon-tcsr = <&tcsr>;
95 + gsbi5_serial: serial@1a240000 {
96 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
97 reg = <0x1a240000 0x1000>,
104 + sata: sata@29000000 {
105 compatible = "qcom,ipq806x-ahci", "generic-ahci";
106 reg = <0x29000000 0x180>;
108 @@ -430,13 +435,35 @@
109 reg = <0x00700000 0x1000>;
110 #address-cells = <1>;
113 + tsens_calib: calib@400 {
116 + tsens_backup: backup@410 {
119 + speedbin_efuse: speedbin@0c0 {
124 gcc: clock-controller@900000 {
125 - compatible = "qcom,gcc-ipq8064";
126 + compatible = "qcom,gcc-ipq8064", "syscon";
127 reg = <0x00900000 0x4000>;
130 + #power-domain-cells = <1>;
132 + tsens: thermal-sensor@900000 {
133 + compatible = "qcom,ipq8064-tsens";
135 + nvmem-cells = <&tsens_calib>, <&tsens_backup>;
136 + nvmem-cell-names = "calib", "calib_backup";
137 + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
138 + interrupt-names = "uplow";
139 + #thermal-sensor-cells = <1>;
140 + #qcom,sensors = <11>;
144 tcsr: syscon@1a400000 {
147 gmac0: ethernet@37000000 {
148 device_type = "network";
149 - compatible = "qcom,ipq806x-gmac";
150 + compatible = "qcom,ipq806x-gmac", "snps,dwmac";
151 reg = <0x37000000 0x200000>;
152 interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
153 interrupt-names = "macirq";
156 gmac1: ethernet@37200000 {
157 device_type = "network";
158 - compatible = "qcom,ipq806x-gmac";
159 + compatible = "qcom,ipq806x-gmac", "snps,dwmac";
160 reg = <0x37200000 0x200000>;
161 interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
162 interrupt-names = "macirq";
165 gmac2: ethernet@37400000 {
166 device_type = "network";
167 - compatible = "qcom,ipq806x-gmac";
168 + compatible = "qcom,ipq806x-gmac", "snps,dwmac";
169 reg = <0x37400000 0x200000>;
170 interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
171 interrupt-names = "macirq";
174 gmac3: ethernet@37600000 {
175 device_type = "network";
176 - compatible = "qcom,ipq806x-gmac";
177 + compatible = "qcom,ipq806x-gmac", "snps,dwmac";
178 reg = <0x37600000 0x200000>;
179 interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
180 interrupt-names = "macirq";
181 @@ -740,13 +767,13 @@
186 - compatible = "simple-bus";
188 + compatible = "arm,amba-bus";
189 #address-cells = <1>;
194 + sdcc1: sdcc@12400000 {
196 compatible = "arm,pl18x", "arm,primecell";
197 arm,primecell-periphid = <0x00051180>;
198 @@ -760,13 +787,12 @@
203 vmmc-supply = <&vsdcc_fixed>;
204 dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
205 dma-names = "tx", "rx";
209 + sdcc3: sdcc@12180000 {
210 compatible = "arm,pl18x", "arm,primecell";
211 arm,primecell-periphid = <0x00051180>;