1 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
2 +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
9 compatible = "qcom,krait";
10 enable-method = "qcom,kpss-acc-v1";
18 compatible = "qcom,krait";
19 enable-method = "qcom,kpss-acc-v1";
26 + smem: smem@41000000 {
27 reg = <0x41000000 0x200000>;
31 gpio-ranges = <&qcom_pinmux 0 0 69>;
34 + #address-cells = <0>;
35 #interrupt-cells = <2>;
36 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
39 function = "pcie3_rst";
40 drive-strength = <12>;
47 intc: interrupt-controller@2000000 {
48 compatible = "qcom,msm-qgic2";
50 + #address-cells = <0>;
51 #interrupt-cells = <3>;
52 reg = <0x02000000 0x1000>,
55 acc0: clock-controller@2088000 {
56 compatible = "qcom,kpss-acc-v1";
57 reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
58 + clock-output-names = "acpu0_aux";
61 acc1: clock-controller@2098000 {
62 compatible = "qcom,kpss-acc-v1";
63 reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
64 + clock-output-names = "acpu1_aux";
67 saw0: regulator@2089000 {
68 - compatible = "qcom,saw2";
69 + compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
70 reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
74 saw1: regulator@2099000 {
75 - compatible = "qcom,saw2";
76 + compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
77 reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
82 syscon-tcsr = <&tcsr>;
85 + gsbi2_serial: serial@12490000 {
86 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
87 reg = <0x12490000 0x1000>,
91 syscon-tcsr = <&tcsr>;
94 + gsbi5_serial: serial@1a240000 {
95 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
96 reg = <0x1a240000 0x1000>,
103 + sata: sata@29000000 {
104 compatible = "qcom,ipq806x-ahci", "generic-ahci";
105 reg = <0x29000000 0x180>;
107 @@ -430,13 +435,35 @@
108 reg = <0x00700000 0x1000>;
109 #address-cells = <1>;
112 + tsens_calib: calib@400 {
115 + tsens_backup: backup@410 {
118 + speedbin_efuse: speedbin@0c0 {
123 gcc: clock-controller@900000 {
124 - compatible = "qcom,gcc-ipq8064";
125 + compatible = "qcom,gcc-ipq8064", "syscon";
126 reg = <0x00900000 0x4000>;
129 + #power-domain-cells = <1>;
131 + tsens: thermal-sensor@900000 {
132 + compatible = "qcom,ipq8064-tsens";
134 + nvmem-cells = <&tsens_calib>, <&tsens_backup>;
135 + nvmem-cell-names = "calib", "calib_backup";
136 + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
137 + interrupt-names = "uplow";
138 + #thermal-sensor-cells = <1>;
139 + #qcom,sensors = <11>;
143 tcsr: syscon@1a400000 {
146 gmac0: ethernet@37000000 {
147 device_type = "network";
148 - compatible = "qcom,ipq806x-gmac";
149 + compatible = "qcom,ipq806x-gmac", "snps,dwmac";
150 reg = <0x37000000 0x200000>;
151 interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
152 interrupt-names = "macirq";
155 gmac1: ethernet@37200000 {
156 device_type = "network";
157 - compatible = "qcom,ipq806x-gmac";
158 + compatible = "qcom,ipq806x-gmac", "snps,dwmac";
159 reg = <0x37200000 0x200000>;
160 interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
161 interrupt-names = "macirq";
164 gmac2: ethernet@37400000 {
165 device_type = "network";
166 - compatible = "qcom,ipq806x-gmac";
167 + compatible = "qcom,ipq806x-gmac", "snps,dwmac";
168 reg = <0x37400000 0x200000>;
169 interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
170 interrupt-names = "macirq";
173 gmac3: ethernet@37600000 {
174 device_type = "network";
175 - compatible = "qcom,ipq806x-gmac";
176 + compatible = "qcom,ipq806x-gmac", "snps,dwmac";
177 reg = <0x37600000 0x200000>;
178 interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
179 interrupt-names = "macirq";
180 @@ -740,13 +767,13 @@
185 - compatible = "simple-bus";
187 + compatible = "arm,amba-bus";
188 #address-cells = <1>;
193 + sdcc1: sdcc@12400000 {
195 compatible = "arm,pl18x", "arm,primecell";
196 arm,primecell-periphid = <0x00051180>;
197 @@ -760,13 +787,12 @@
202 vmmc-supply = <&vsdcc_fixed>;
203 dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
204 dma-names = "tx", "rx";
208 + sdcc3: sdcc@12180000 {
209 compatible = "arm,pl18x", "arm,primecell";
210 arm,primecell-periphid = <0x00051180>;