1 --- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
2 +++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
4 device_type = "memory";
9 - compatible = "virtual,mdio-gpio";
10 - gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
11 - <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
12 - #address-cells = <1>;
15 - pinctrl-0 = <&mdio0_pins>;
16 - pinctrl-names = "default";
18 - switch0: switch@10 {
19 - compatible = "qca,qca8337";
20 - #address-cells = <1>;
25 - pinctrl-0 = <&sw0_reset_pin>;
26 - pinctrl-names = "default";
28 - reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
32 - #address-cells = <1>;
35 - switch0cpu: port@0 {
38 - ethernet = <&gmac0>;
39 - phy-mode = "rgmii-id";
76 compatible = "virtual,mdio-gpio";
84 + pinctrl-0 = <&mdio0_pins>;
85 + pinctrl-names = "default";
87 + switch0: switch@10 {
88 + compatible = "qca,qca8337";
89 + #address-cells = <1>;
94 + pinctrl-0 = <&sw0_reset_pin>;
95 + pinctrl-names = "default";
97 + reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
101 + #address-cells = <1>;
104 + switch0cpu: port@0 {
107 + ethernet = <&gmac0>;
108 + phy-mode = "rgmii-id";