target/linux/kirkwood/patches/200-iconnect.patch

   1 --- a/arch/arm/mach-kirkwood/Makefile
   2 +++ b/arch/arm/mach-kirkwood/Makefile
   3 @@ -8,6 +8,7 @@
   4  obj-$(CONFIG_MACH_DOCKSTAR)            += dockstar-setup.o
   5  obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)    += sheevaplug-setup.o
   6  obj-$(CONFIG_MACH_GURUPLUG)            += guruplug-setup.o
   7 +obj-$(CONFIG_MACH_ICONNECT)            += iconnect-setup.o
   8  obj-$(CONFIG_MACH_TS219)               += ts219-setup.o tsx1x-common.o
   9  obj-$(CONFIG_MACH_TS41X)               += ts41x-setup.o tsx1x-common.o
  10  obj-$(CONFIG_MACH_OPENRD)              += openrd-setup.o
  11 --- a/arch/arm/mach-kirkwood/Kconfig
  12 +++ b/arch/arm/mach-kirkwood/Kconfig
  13 @@ -105,6 +105,12 @@
  14           Say 'Y' here if you want your kernel to support the
  15           Seagate FreeAgent DockStar.
  16
  17 +config MACH_ICONNECT
  18 +       bool "Iomega iConnect Wireless"
  19 +       help
  20 +         Say 'Y' here if you want your kernel to support the
  21 +         Iomega iConnect Wireless.
  22 +
  23  endmenu
  24
  25  endif
  26 --- /dev/null
  27 +++ b/arch/arm/mach-kirkwood/iconnect-setup.c
  28 @@ -0,0 +1,95 @@
  29 +/*
  30 + * arch/arm/mach-kirkwood/iconnect-setup.c
  31 + *
  32 + * Iomega iConnect Wireless
  33 + *
  34 + * This file is licensed under the terms of the GNU General Public
  35 + * License version 2.  This program is licensed "as is" without any
  36 + * warranty of any kind, whether express or implied.
  37 + */
  38 +
  39 +#include <linux/kernel.h>
  40 +#include <linux/init.h>
  41 +#include <linux/platform_device.h>
  42 +#include <linux/irq.h>
  43 +#include <linux/mtd/partitions.h>
  44 +#include <linux/mv643xx_eth.h>
  45 +#include <linux/ethtool.h>
  46 +#include <asm/mach-types.h>
  47 +#include <asm/mach/arch.h>
  48 +#include <mach/kirkwood.h>
  49 +#include "common.h"
  50 +#include "mpp.h"
  51 +
  52 +static struct mtd_partition iconnect_nand_parts[] = {
  53 +       {
  54 +               .name = "u-boot",
  55 +               .offset = 0,
  56 +               .size = SZ_1M
  57 +       }, {
  58 +               .name = "uImage",
  59 +               .offset = MTDPART_OFS_NXTBLK,
  60 +               .size = SZ_1M + SZ_2M
  61 +       }, {
  62 +               .name = "rootfs",
  63 +               .offset = MTDPART_OFS_NXTBLK,
  64 +               .size = SZ_32M,
  65 +       }, {
  66 +               .name = "data",
  67 +               .offset = MTDPART_OFS_NXTBLK,
  68 +               .size = MTDPART_SIZ_FULL
  69 +       },
  70 +};
  71 +
  72 +static struct mv643xx_eth_platform_data iconnect_ge00_data = {
  73 +       .phy_addr       = MV643XX_ETH_PHY_ADDR(11),
  74 +};
  75 +
  76 +static unsigned int iconnect_mpp_config[] __initdata = {
  77 +       MPP8_TW_SDA,
  78 +       MPP9_TW_SCK,
  79 +       MPP10_UART0_TXD,
  80 +       MPP11_UART0_RXD,
  81 +       MPP28_GPIO,
  82 +       0
  83 +};
  84 +
  85 +static void __init iconnect_init(void)
  86 +{
  87 +       u32 dev, rev;
  88 +
  89 +       /*
  90 +        * Basic setup. Needs to be called early.
  91 +        */
  92 +       kirkwood_init();
  93 +       kirkwood_mpp_conf(iconnect_mpp_config);
  94 +
  95 +       kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
  96 +       kirkwood_ehci_init();
  97 +
  98 +       kirkwood_ge00_init(&iconnect_ge00_data);
  99 +       kirkwood_pcie_id(&dev, &rev);
 100 +
 101 +       kirkwood_uart0_init();
 102 +       kirkwood_i2c_init();
 103 +}
 104 +
 105 +static int __init iconnect_pci_init(void)
 106 +{
 107 +       if (machine_is_iconnect())
 108 +               kirkwood_pcie_init();
 109 +
 110 +       return 0;
 111 +}
 112 +subsys_initcall(iconnect_pci_init);
 113 +
 114 +
 115 +MACHINE_START(ICONNECT, "Iomega iConnect Wireless")
 116 +       .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
 117 +       .io_pg_offst    = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 118 +       .boot_params    = 0x00000100,
 119 +       .init_machine   = iconnect_init,
 120 +       .map_io         = kirkwood_map_io,
 121 +       .init_irq       = kirkwood_init_irq,
 122 +       .timer          = &kirkwood_timer,
 123 +MACHINE_END