1 --- a/arch/arm/boot/dts/Makefile
2 +++ b/arch/arm/boot/dts/Makefile
3 @@ -237,6 +237,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
6 kirkwood-ds411slim.dtb \
7 + kirkwood-goflexhome.dtb \
8 kirkwood-goflexnet.dtb \
9 kirkwood-guruplug-server-plus.dtb \
12 +++ b/arch/arm/boot/dts/kirkwood-goflexhome.dts
16 +#include "kirkwood.dtsi"
17 +#include "kirkwood-6281.dtsi"
20 + model = "Seagate GoFlex Home";
21 + compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood";
24 + led-boot = &led_health;
25 + led-failsafe = &led_fault;
26 + led-running = &led_health;
27 + led-upgrade = &led_fault;
31 + device_type = "memory";
32 + reg = <0x00000000 0x8000000>;
36 + bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
37 + stdout-path = &uart0;
41 + pinctrl: pin-controller@10000 {
42 + pmx_usb_power_enable: pmx-usb-power-enable {
43 + marvell,pins = "mpp29";
44 + marvell,function = "gpio";
46 + pmx_led_white: pmx-led-white {
47 + marvell,pins = "mpp40";
48 + marvell,function = "gpio";
50 + pmx_led_green: pmx-led_green {
51 + marvell,pins = "mpp46";
52 + marvell,function = "gpio";
54 + pmx_led_orange: pmx-led-orange {
55 + marvell,pins = "mpp47";
56 + marvell,function = "gpio";
70 + compatible = "gpio-leds";
72 + led_health: health {
73 + label = "status:green:health";
74 + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
77 + label = "status:orange:fault";
78 + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
81 + label = "status:white:misc";
82 + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
83 + linux,default-trigger = "disk-activity";
87 + compatible = "simple-bus";
88 + #address-cells = <1>;
90 + pinctrl-0 = <&pmx_usb_power_enable>;
91 + pinctrl-names = "default";
93 + usb_power: regulator@1 {
94 + compatible = "regulator-fixed";
96 + regulator-name = "USB Power";
97 + regulator-min-microvolt = <5000000>;
98 + regulator-max-microvolt = <5000000>;
100 + regulator-always-on;
102 + gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
113 + reg = <0x0000000 0x100000>;
119 + reg = <0x100000 0x0ff00000>;
126 + ethphy0: ethernet-phy@0 {
134 + phy-handle = <ðphy0>;