2 +++ b/arch/arm/boot/dts/kirkwood-on100.dts
6 +#include "kirkwood.dtsi"
7 +#include "kirkwood-6282.dtsi"
10 + model = "Cisco Systems ON100";
11 + compatible = "cisco,on100", "marvell,kirkwood-88f6282", "marvell,kirkwood";
14 + device_type = "memory";
15 + reg = <0x00000000 0x20000000>;
19 + led-boot = &led_health_green;
20 + led-failsafe = &led_health_red;
21 + led-running = &led_health_green;
22 + led-upgrade = &led_health_red;
27 + bootargs = "console=ttyS0,115200n8 earlyprintk";
28 + stdout-path = "serial0:115200n8";
32 + compatible = "gpio-keys";
33 + #address-cells = <1>;
35 + pinctrl-0 = <&pmx_btn_reset>;
36 + pinctrl-names = "default";
39 + label = "Reset Button";
40 + linux,code = <KEY_RESTART>;
41 + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
46 + compatible = "gpio-leds";
47 + pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g >;
48 + pinctrl-names = "default";
50 + led_health_green: health_green {
51 + label = "on100:green:health";
52 + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
55 + led_health_red: health_red {
56 + label = "on100:red:health";
57 + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
61 + label = "on100:green:health2";
62 + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
66 + label = "on100:red:health2";
67 + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
76 + phy-handle = <ðphy0>;
77 + phy-connection-type = "rgmii-id";
85 + phy-handle = <ðphy1>;
86 + phy-connection-type = "rgmii-id";
93 + ethphy0: ethernet-phy@0 {
94 + /* Marvell 88E1121R */
95 + compatible = "ethernet-phy-id0141.0cb0",
96 + "ethernet-phy-ieee802.3-c22";
100 + ethphy1: ethernet-phy@1 {
101 + /* Marvell 88E1121R */
102 + compatible = "ethernet-phy-id0141.0cb0",
103 + "ethernet-phy-ieee802.3-c22";
113 + reg = <0x00000000 0x000a0000>;
118 + label = "u-boot environment";
119 + reg = <0x000a0000 0x00020000>;
125 + reg = <0x000c0000 0x00540000>;
130 + reg = <0x00600000 0x1fa00000>;
135 + pmx_led_health_r: pmx-led-health-r {
136 + marvell,pins = "mpp45";
137 + marvell,function = "gpio";
140 + pmx_led_health_g: pmx-led-health-g {
141 + marvell,pins = "mpp44";
142 + marvell,function = "gpio";
145 + pmx_led_health2_r: pmx-led-health2-r {
146 + marvell,pins = "mpp47";
147 + marvell,function = "gpio";
150 + pmx_led_health2_g: pmx-led-health2-g {
151 + marvell,pins = "mpp46";
152 + marvell,function = "gpio";
155 + pmx_btn_reset: pmx-led-reset {
156 + marvell,pins = "mpp31";
157 + marvell,function = "gpio";
168 --- a/arch/arm/boot/dts/Makefile
169 +++ b/arch/arm/boot/dts/Makefile
170 @@ -271,6 +271,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
171 kirkwood-nsa310b.dtb \
172 kirkwood-nsa320.dtb \
173 kirkwood-nsa325.dtb \
174 + kirkwood-on100.dtb \
175 kirkwood-openblocks_a6.dtb \
176 kirkwood-openblocks_a7.dtb \
177 kirkwood-openrd-base.dtb \