2 +++ b/arch/arm/boot/dts/kirkwood-on100.dts
6 +#include "kirkwood.dtsi"
7 +#include "kirkwood-6282.dtsi"
10 + model = "Cisco Systems ON100";
11 + compatible = "cisco,on100", "marvell,kirkwood-88f6282", "marvell,kirkwood";
14 + device_type = "memory";
15 + reg = <0x00000000 0x20000000>;
19 + led-boot = &led_health_green;
20 + led-failsafe = &led_health_red;
21 + led-running = &led_health_green;
22 + led-upgrade = &led_health_red;
27 + bootargs = "console=ttyS0,115200n8 earlyprintk";
28 + stdout-path = "serial0:115200n8";
32 + compatible = "gpio-keys";
33 + #address-cells = <1>;
35 + pinctrl-0 = <&pmx_btn_reset>;
36 + pinctrl-names = "default";
39 + label = "Reset Button";
40 + linux,code = <KEY_RESTART>;
41 + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
46 + compatible = "gpio-leds";
47 + pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g >;
48 + pinctrl-names = "default";
50 + led_health_green: health_green {
51 + label = "on100:green:health";
52 + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
53 + default-state = "on";
56 + led_health_red: health_red {
57 + label = "on100:red:health";
58 + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
62 + label = "on100:green:health2";
63 + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
67 + label = "on100:red:health2";
68 + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
77 + phy-handle = <ðphy0>;
78 + phy-connection-type = "rgmii-id";
86 + phy-handle = <ðphy1>;
87 + phy-connection-type = "rgmii-id";
94 + ethphy0: ethernet-phy@0 {
95 + /* Marvell 88E1121R */
96 + compatible = "ethernet-phy-id0141.0cb0",
97 + "ethernet-phy-ieee802.3-c22";
101 + ethphy1: ethernet-phy@1 {
102 + /* Marvell 88E1121R */
103 + compatible = "ethernet-phy-id0141.0cb0",
104 + "ethernet-phy-ieee802.3-c22";
114 + reg = <0x00000000 0x000a0000>;
119 + label = "u-boot environment";
120 + reg = <0x000a0000 0x00020000>;
126 + reg = <0x000c0000 0x00540000>;
131 + reg = <0x00600000 0x1fa00000>;
136 + pmx_led_health_r: pmx-led-health-r {
137 + marvell,pins = "mpp45";
138 + marvell,function = "gpio";
141 + pmx_led_health_g: pmx-led-health-g {
142 + marvell,pins = "mpp44";
143 + marvell,function = "gpio";
146 + pmx_led_health2_r: pmx-led-health2-r {
147 + marvell,pins = "mpp47";
148 + marvell,function = "gpio";
151 + pmx_led_health2_g: pmx-led-health2-g {
152 + marvell,pins = "mpp46";
153 + marvell,function = "gpio";
156 + pmx_btn_reset: pmx-led-reset {
157 + marvell,pins = "mpp31";
158 + marvell,function = "gpio";
169 --- a/arch/arm/boot/dts/Makefile
170 +++ b/arch/arm/boot/dts/Makefile
171 @@ -271,6 +271,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
172 kirkwood-nsa310b.dtb \
173 kirkwood-nsa320.dtb \
174 kirkwood-nsa325.dtb \
175 + kirkwood-on100.dtb \
176 kirkwood-openblocks_a6.dtb \
177 kirkwood-openblocks_a7.dtb \
178 kirkwood-openrd-base.dtb \