2 +++ b/arch/arm/boot/dts/kirkwood-on100.dts
6 +#include "kirkwood.dtsi"
7 +#include "kirkwood-6282.dtsi"
10 + model = "Cisco Systems ON100";
11 + compatible = "cisco,on100", "marvell,kirkwood-88f6282", "marvell,kirkwood";
14 + device_type = "memory";
15 + reg = <0x00000000 0x20000000>;
19 + led-boot = &led_health_green;
20 + led-failsafe = &led_health_red;
21 + led-running = &led_health_green;
22 + led-upgrade = &led_health_red;
27 + bootargs = "console=ttyS0,115200n8 earlyprintk";
28 + stdout-path = "serial0:115200n8";
32 + compatible = "gpio-keys";
33 + pinctrl-0 = <&pmx_btn_reset>;
34 + pinctrl-names = "default";
37 + label = "Reset Button";
38 + linux,code = <KEY_RESTART>;
39 + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
44 + compatible = "gpio-leds";
45 + pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g >;
46 + pinctrl-names = "default";
48 + led_health_green: health_green {
49 + label = "on100:green:health";
50 + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
53 + led_health_red: health_red {
54 + label = "on100:red:health";
55 + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
59 + label = "on100:green:health2";
60 + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
64 + label = "on100:red:health2";
65 + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
74 + phy-handle = <ðphy0>;
75 + phy-connection-type = "rgmii-id";
83 + phy-handle = <ðphy1>;
84 + phy-connection-type = "rgmii-id";
91 + ethphy0: ethernet-phy@0 {
92 + /* Marvell 88E1121R */
93 + compatible = "ethernet-phy-id0141.0cb0",
94 + "ethernet-phy-ieee802.3-c22";
98 + ethphy1: ethernet-phy@1 {
99 + /* Marvell 88E1121R */
100 + compatible = "ethernet-phy-id0141.0cb0",
101 + "ethernet-phy-ieee802.3-c22";
111 + reg = <0x00000000 0x000a0000>;
116 + label = "u-boot environment";
117 + reg = <0x000a0000 0x00020000>;
123 + reg = <0x000c0000 0x00540000>;
128 + reg = <0x00600000 0x1fa00000>;
133 + pmx_led_health_r: pmx-led-health-r {
134 + marvell,pins = "mpp45";
135 + marvell,function = "gpio";
138 + pmx_led_health_g: pmx-led-health-g {
139 + marvell,pins = "mpp44";
140 + marvell,function = "gpio";
143 + pmx_led_health2_r: pmx-led-health2-r {
144 + marvell,pins = "mpp47";
145 + marvell,function = "gpio";
148 + pmx_led_health2_g: pmx-led-health2-g {
149 + marvell,pins = "mpp46";
150 + marvell,function = "gpio";
153 + pmx_btn_reset: pmx-led-reset {
154 + marvell,pins = "mpp31";
155 + marvell,function = "gpio";
166 --- a/arch/arm/boot/dts/Makefile
167 +++ b/arch/arm/boot/dts/Makefile
168 @@ -290,6 +290,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
169 kirkwood-nsa310b.dtb \
170 kirkwood-nsa320.dtb \
171 kirkwood-nsa325.dtb \
172 + kirkwood-on100.dtb \
173 kirkwood-openblocks_a6.dtb \
174 kirkwood-openblocks_a7.dtb \
175 kirkwood-openrd-base.dtb \