1 --- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
2 +++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
8 + compatible = "marvell,88e6171";
19 compatible = "marvell,dsa";
27 reg = <0x200000 0x2A0000>;
33 reg = <0x4A0000 0x1760000>;
37 - label = "alt_kernel";
39 reg = <0x1C00000 0x2A0000>;
43 - label = "alt_rootfs";
45 reg = <0x1EA0000 0x1760000>;
51 /* eth1 is connected to the switch at port 6. However DSA only supports a
52 - * single CPU port. So leave this port disabled to avoid confusion.
53 + * single CPU port. Upstream uses DSA so they disable this port to avoid confusion.
56 - status = "disabled";
64 /* There is no battery on the board, so the RTC does not keep