5 #include <dt-bindings/input/input.h>
8 model = "ARV752DPW - Arcor 802";
11 bootargs = "console=ttyLTQ0,115200";
15 led-boot = &power_red;
16 led-failsafe = &power_blue;
17 led-running = &power_red;
19 led-internet = &internet_red;
25 reg = <0x0 0x4000000>;
31 gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
38 compatible = "lantiq,nor";
40 reg = <0 0x0 0x800000>;
45 compatible = "fixed-partitions";
51 reg = <0x00000 0x10000>;
57 reg = <0x10000 0x10000>;
63 reg = <0x20000 0x7d0000>;
66 boardconfig: partition@7f0000 {
67 label = "board_config";
68 reg = <0x7f0000 0x10000>;
74 gpiomm: gpiomm@4000000 {
75 compatible = "lantiq,gpio-mm";
81 lantiq,shadow = <0x3>;
85 gpio: pinmux@E100B10 {
86 pinctrl-names = "default";
87 pinctrl-0 = <&state_default>;
89 state_default: pinmux {
91 lantiq,groups = "ebu cs1";
92 lantiq,function = "ebu";
95 lantiq,groups = "exin1";
96 lantiq,function = "exin";
101 lantiq,groups = "req2", "req1";
102 lantiq,function = "pci";
103 lantiq,open-drain = <1>;
108 lantiq,groups = "gnt1";
109 lantiq,function = "pci";
113 lantiq,pins = "io21";
118 lantiq,pins = "io3", "io5", "io6", "io8";
123 lantiq,pins = "io11", "io12", "io13", "io28";
126 lantiq,open-drain = <1>;
133 gpios = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
138 mtd-mac-address = <&boardconfig 0x16>;
143 compatible = "gpio-keys-polled";
144 #address-cells = <1>;
146 poll-interval = <100>;
150 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
151 linux,code = <KEY_WPS_BUTTON>;
155 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
156 linux,code = <KEY_POWER>;
160 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
161 linux,code = <BTN_0>;
165 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
166 linux,code = <KEY_RESTART>;
171 compatible = "gpio-leds";
173 label = "arv752dpw:blue:power";
174 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
176 internet_red: internet {
177 label = "arv752dpw:red:internet";
178 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
181 label = "arv752dpw:red:message";
182 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
185 label = "arv752dpw:red:power";
186 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
187 default-state = "keep";
190 label = "arv752dpw:red:voice";
191 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
194 label = "arv752dpw:red:umts";
195 gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
198 label = "arv752dpw:red:wifi";
199 gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
202 label = "arv752dpw:green:tae-n";
203 gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
206 label = "arv752dpw:green:tae-u";
207 gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
210 label = "arv752dpw:green:isdn";
211 gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>;
214 label = "arv752dpw:blue:internet";
215 gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
218 label = "arv752dpw:blue:voice";
219 gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
226 lantiq,external-clock;
227 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
228 interrupt-map = <0x7000 0 0 1 &icu0 135>;
232 compatible = "pci1814,0601";
233 reg = <0x7000 0 0 0 0>;
234 ralink,mtd-eeprom = <&boardconfig 0x410>;
235 ralink,mtd-eeprom-swap;