3 /include/ "danube.dtsi"
6 model = "ARV752DPW22 - Arcor 803";
9 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
20 reg = <0x0 0x4000000>;
26 gpios = <&gpiomm 1 0>;
33 compatible = "lantiq,nor";
35 reg = <0 0x0 0x800000>;
41 reg = <0x00000 0x30000>;
47 reg = <0x30000 0x10000>;
53 reg = <0x40000 0x7b0000>;
57 label = "board_config";
58 reg = <0x7f0000 0x10000>;
64 compatible = "lantiq,eth-mac";
65 reg = <0 0x7f0016 0x6>;
69 gpiomm: gpiomm@4000000 {
70 compatible = "lantiq,gpio-mm";
80 gpio: pinmux@E100B10 {
81 pinctrl-names = "default";
82 pinctrl-0 = <&state_default>;
84 state_default: pinmux {
86 lantiq,groups = "ebu cs1";
87 lantiq,function = "ebu";
90 lantiq,groups = "exin1";
91 lantiq,function = "exin";
96 lantiq,groups = "req1";
97 lantiq,function = "pci";
102 lantiq,groups = "gnt1";
103 lantiq,function = "pci";
104 lantiq,open-drain = <1>;
108 lantiq,pins = "io21";
109 lantiq,open-drain = <1>;
113 lantiq,pins = "io3", "io5", "io6", "io8";
114 lantiq,open-drain = <1>;
118 lantiq,pins = "io11", "io12", "io13", "io28";
127 gpios = <&gpiomm 0 0>;
136 lantiq,external-clock;
138 0x7000 0 0 1 &icu0 30
139 0x7800 0 0 1 &icu0 135
140 0x7800 0 0 2 &icu0 135
141 0x7800 0 0 3 &icu0 135
143 gpio-reset = <&gpio 21 0>;
150 compatible = "ralink,eeprom";
151 ralink,eeprom = "RT2860.eeprom";
155 compatible = "gpio-keys-polled";
156 #address-cells = <1>;
158 poll-interval = <100>;
162 gpios = <&gpio 11 1>;
163 linux,code = <0x211>;
167 gpios = <&gpio 12 1>;
168 linux,code = <0x110>;
172 gpios = <&gpio 13 1>;
173 linux,code = <0x111>;
177 gpios = <&gpio 28 1>;
178 linux,code = <0x198>;
183 compatible = "gpio-leds";
199 default-state = "keep";
207 gpios = <&gpiomm 3 1>;
211 gpios = <&gpiomm 4 1>;
215 gpios = <&gpiomm 5 1>;
219 gpios = <&gpiomm 6 1>;
223 gpios = <&gpiomm 7 1>;
227 gpios = <&gpiomm 8 1>;
231 gpios = <&gpiomm 9 1>;
235 gpios = <&gpiomm 11 1>;
239 gpios = <&gpiomm 12 1>;
243 gpios = <&gpiomm 13 1>;
247 gpios = <&gpiomm 14 1>;