3 /include/ "danube.dtsi"
6 model = "ARV752DPW22 - Arcor 803";
9 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
22 reg = <0x0 0x4000000>;
28 gpios = <&gpiomm 1 0>;
35 compatible = "lantiq,nor";
37 reg = <0 0x0 0x800000>;
43 reg = <0x00000 0x30000>;
49 reg = <0x30000 0x10000>;
55 reg = <0x40000 0x7b0000>;
59 label = "board_config";
60 reg = <0x7f0000 0x10000>;
66 compatible = "lantiq,eth-mac";
67 reg = <0 0x7f0016 0x6>;
71 gpiomm: gpiomm@4000000 {
72 compatible = "lantiq,gpio-mm";
82 gpio: pinmux@E100B10 {
83 pinctrl-names = "default";
84 pinctrl-0 = <&state_default>;
86 state_default: pinmux {
88 lantiq,groups = "ebu cs1";
89 lantiq,function = "ebu";
92 lantiq,groups = "exin1";
93 lantiq,function = "exin";
98 lantiq,groups = "req1";
99 lantiq,function = "pci";
104 lantiq,groups = "gnt1";
105 lantiq,function = "pci";
106 lantiq,open-drain = <1>;
110 lantiq,pins = "io21";
111 lantiq,open-drain = <1>;
115 lantiq,pins = "io3", "io5", "io6", "io8";
116 lantiq,open-drain = <1>;
120 lantiq,pins = "io11", "io12", "io13", "io28";
129 gpios = <&gpiomm 0 0>;
138 lantiq,external-clock;
140 0x7000 0 0 1 &icu0 30
141 0x7800 0 0 1 &icu0 135
142 0x7800 0 0 2 &icu0 135
143 0x7800 0 0 3 &icu0 135
145 gpio-reset = <&gpio 21 0>;
152 compatible = "ralink,eeprom";
153 ralink,eeprom = "RT2860.eeprom";
157 compatible = "gpio-keys-polled";
158 #address-cells = <1>;
160 poll-interval = <100>;
164 gpios = <&gpio 11 1>;
165 linux,code = <0x211>;
169 gpios = <&gpio 12 1>;
170 linux,code = <0x110>;
174 gpios = <&gpio 13 1>;
175 linux,code = <0x111>;
179 gpios = <&gpio 28 1>;
180 linux,code = <0x198>;
185 compatible = "gpio-leds";
201 default-state = "keep";
209 gpios = <&gpiomm 3 1>;
213 gpios = <&gpiomm 4 1>;
217 gpios = <&gpiomm 5 1>;
221 gpios = <&gpiomm 6 1>;
225 gpios = <&gpiomm 7 1>;
229 gpios = <&gpiomm 8 1>;
233 gpios = <&gpiomm 9 1>;
237 gpios = <&gpiomm 11 1>;
241 gpios = <&gpiomm 12 1>;
245 gpios = <&gpiomm 13 1>;
249 gpios = <&gpiomm 14 1>;