5 bootargs = "root= console=ttyLTQ0,115200";
9 led-boot = &power_green;
10 led-failsafe = &power_red;
11 led-running = &power_green;
14 led-internet = &internet;
20 reg = <0x0 0x4000000>;
24 gpio: pinmux@E100B10 {
25 pinctrl-names = "default";
26 pinctrl-0 = <&state_default>;
28 state_default: pinmux {
30 lantiq,groups = "exin1";
31 lantiq,function = "exin";
34 lantiq,groups = "gnt1", "req1";
35 lantiq,function = "pci";
38 lantiq,groups = "req1";
40 lantiq,open-drain = <1>;
44 lantiq,groups = "gnt1";
49 pins_spi_default: pins_spi_default {
51 lantiq,groups = "spi_di";
52 lantiq,function = "spi";
55 lantiq,groups = "spi_do", "spi_clk",
57 lantiq,function = "spi";
73 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
78 compatible = "ath9k,eeprom";
79 ath,eep-flash = <&ath9k_cal 0xf000>;
86 compatible = "rtl8366rb";
87 gpio-sda = <&gpio 35 GPIO_ACTIVE_HIGH>;
88 gpio-sck = <&gpio 37 GPIO_ACTIVE_HIGH>;
92 compatible = "gpio-keys-polled";
95 poll-interval = <100>;
99 gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
100 linux,code = <KEY_RFKILL>;
104 gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
105 linux,code = <KEY_WPS_BUTTON>;
109 gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
110 linux,code = <KEY_RESTART>;
115 compatible = "gpio-leds";
117 label = "dgn3500:green:internet";
118 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
121 internet red is missing
124 label = "dgn3500:green:dsl";
125 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
128 label = "dgn3500:green:usb";
129 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
132 label = "dgn3500:green:power";
133 gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
134 default-state = "keep";
137 label = "dgn3500:red:power";
138 gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
141 power amber is missing
144 label = "dgn3500:blue:wireless";
145 gpios = <&gpio 51 GPIO_ACTIVE_LOW>;
148 label = "dgn3500:green:wps";
149 gpios = <&gpio 52 GPIO_ACTIVE_LOW>;
155 pinctrl-names = "default";
156 pinctrl-0 = <&pins_spi_default>;
161 #address-cells = <1>;
163 compatible = "jedec,spi-nor";
165 spi-max-frequency = <20000000>;
168 compatible = "fixed-partitions";
169 #address-cells = <1>;
179 reg = <0x10000 0x10000>;
184 ath9k_cal: partition@20000 {
185 reg = <0x20000 0x10000>;
186 label = "calibration";
191 reg = <0x50000 0xfa0000>;