3 #include <dt-bindings/input/input.h>
7 bootargs = "root= console=ttyLTQ0,115200";
11 led-boot = &power_green;
12 led-failsafe = &power_red;
13 led-running = &power_green;
16 led-internet = &internet;
22 reg = <0x0 0x4000000>;
26 gpio: pinmux@E100B10 {
27 pinctrl-names = "default";
28 pinctrl-0 = <&state_default>;
30 state_default: pinmux {
32 lantiq,groups = "exin1";
33 lantiq,function = "exin";
36 lantiq,groups = "gnt1", "req1";
37 lantiq,function = "pci";
40 lantiq,groups = "req1";
42 lantiq,open-drain = <1>;
46 lantiq,groups = "gnt1";
51 pins_spi_default: pins_spi_default {
53 lantiq,groups = "spi_di";
54 lantiq,function = "spi";
57 lantiq,groups = "spi_do", "spi_clk",
59 lantiq,function = "spi";
75 compatible = "realtek,rtl8366rb";
76 gpio-sda = <&gpio 35 GPIO_ACTIVE_HIGH>;
77 gpio-sck = <&gpio 37 GPIO_ACTIVE_HIGH>;
81 compatible = "gpio-keys-polled";
84 poll-interval = <100>;
88 gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
89 linux,code = <KEY_RFKILL>;
93 gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
94 linux,code = <KEY_WPS_BUTTON>;
98 gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
99 linux,code = <KEY_RESTART>;
104 compatible = "gpio-leds";
106 label = "dgn3500:green:internet";
107 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
110 internet red is missing
113 label = "dgn3500:green:dsl";
114 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
117 label = "dgn3500:green:usb";
118 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
121 label = "dgn3500:green:power";
122 gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
123 default-state = "keep";
126 label = "dgn3500:red:power";
127 gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
130 power amber is missing
133 label = "dgn3500:blue:wireless";
134 gpios = <&gpio 51 GPIO_ACTIVE_LOW>;
137 label = "dgn3500:green:wps";
138 gpios = <&gpio 52 GPIO_ACTIVE_LOW>;
145 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
148 compatible = "pci168c,0029";
149 reg = <0x7000 0 0 0 0>;
150 qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
155 pinctrl-names = "default";
156 pinctrl-0 = <&pins_spi_default>;
161 #address-cells = <1>;
163 compatible = "jedec,spi-nor";
165 spi-max-frequency = <20000000>;
168 compatible = "fixed-partitions";
169 #address-cells = <1>;
179 reg = <0x10000 0x10000>;
184 ath9k_cal: partition@20000 {
185 reg = <0x20000 0x10000>;
186 label = "calibration";
191 reg = <0x50000 0xfa0000>;