5 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
10 led-failsafe = &power;
18 reg = <0x0 0x4000000>;
24 compatible = "lantiq,fpi", "simple-bus";
25 ranges = <0x0 0x10000000 0xEEFFFFF>;
26 reg = <0x10000000 0xEF00000>;
31 compatible = "lantiq,localbus", "simple-bus";
35 gpio: pinmux@E100B10 {
36 compatible = "lantiq,pinctrl-xr9";
37 pinctrl-names = "default";
38 pinctrl-0 = <&state_default>;
40 interrupt-parent = <&icu0>;
41 interrupts = <166 135 66 40 41 42 38>;
45 reg = <0xE100B10 0xA0>;
47 state_default: pinmux {
49 lantiq,groups = "exin3";
50 lantiq,function = "exin";
53 lantiq,groups = "stp";
54 lantiq,function = "stp";
57 lantiq,groups = "nand cle", "nand ale",
58 "nand rd", "nand rdy";
59 lantiq,function = "ebu";
62 lantiq,groups = "mdio";
63 lantiq,function = "mdio";
66 lantiq,groups = "gnt1", "req1";
67 lantiq,function = "pci";
70 lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */
71 "io4", "io5", "io6", /* stp */
84 lantiq,pins = "io39", /* exin3 */
85 "io48"; /* nand rdy */
89 pins_spi_default: pins_spi_default {
91 lantiq,groups = "spi_di";
92 lantiq,function = "spi";
95 lantiq,groups = "spi_do", "spi_clk",
97 lantiq,function = "spi";
104 compatible = "lantiq,gpio-stp-xway";
105 reg = <0xE100BB0 0x40>;
109 lantiq,shadow = <0xffff>;
110 lantiq,groups = <0x7>;
119 gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
120 lantiq,portmask = <0x3>;
124 #address-cells = <3>;
126 #interrupt-cells = <1>;
127 compatible = "lantiq,pci-xway1";
128 bus-range = <0x0 0x0>;
129 ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
130 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
131 reg = <0x7000000 0x8000 /* config space */
132 0xE105400 0x400>; /* pci bridge */
133 lantiq,bus-clock = <33333333>;
134 /*lantiq,external-clock;*/
135 lantiq,delay-hi = <0>; /* 0ns delay */
136 lantiq,delay-lo = <0>; /* 0.0ns delay */
137 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
139 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
141 gpios-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
142 req-mask = <0x1>; /* GNT1 */
147 compatible = "lantiq,phy-xrx200";
148 firmware1 = "lantiq/vr9_phy11g_a1x.bin";
149 firmware2 = "lantiq/vr9_phy11g_a2x.bin";
154 compatible = "gpio-keys-polled";
155 #address-cells = <1>;
157 poll-interval = <100>;
160 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
161 linux,code = <KEY_RESTART>;
165 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
166 linux,code = <BTN_0>;
171 compatible = "gpio-leds";
174 label = "easy80920:green:power";
175 gpios = <&stp 9 GPIO_ACTIVE_HIGH>;
176 default-state = "keep";
179 label = "easy80920:green:warning";
180 gpios = <&stp 22 GPIO_ACTIVE_HIGH>;
183 label = "easy80920:green:fxs1";
184 gpios = <&stp 21 GPIO_ACTIVE_HIGH>;
187 label = "easy80920:green:fxs2";
188 gpios = <&stp 20 GPIO_ACTIVE_HIGH>;
191 label = "easy80920:green:fxo";
192 gpios = <&stp 19 GPIO_ACTIVE_HIGH>;
195 label = "easy80920:green:usb1";
196 gpios = <&stp 18 GPIO_ACTIVE_HIGH>;
199 label = "easy80920:green:usb2";
200 gpios = <&stp 15 GPIO_ACTIVE_HIGH>;
203 label = "easy80920:green:sd";
204 gpios = <&stp 14 GPIO_ACTIVE_HIGH>;
207 label = "easy80920:green:wps";
208 gpios = <&stp 12 GPIO_ACTIVE_HIGH>;
214 pinctrl-names = "default";
215 pinctrl-0 = <&pins_spi_default>;
220 #address-cells = <1>;
222 compatible = "jedec,spi-nor";
224 spi-max-frequency = <1000000>;
227 compatible = "fixed-partitions";
228 #address-cells = <1>;
233 label = "SPI (RO) U-Boot Image";
238 reg = <0x20000 0x10000>;
244 reg = <0x30000 0x10000>;
250 reg = <0x40000 0x10000>;
256 reg = <0x50000 0x003a0000>;
265 compatible = "lantiq,xrx200-pdi";
266 #address-cells = <1>;
272 compatible = "lantiq,xrx200-pdi-port";
275 phy-handle = <&phy13>;
278 compatible = "lantiq,xrx200-pdi-port";
281 phy-handle = <&phy11>;
284 compatible = "lantiq,xrx200-pdi-port";
287 phy-handle = <&phy1>;
290 compatible = "lantiq,xrx200-pdi-port";
293 phy-handle = <&phy0>;
298 compatible = "lantiq,xrx200-pdi";
299 #address-cells = <1>;
305 compatible = "lantiq,xrx200-pdi-port";
308 phy-handle = <&phy5>;
313 #address-cells = <1>;
315 compatible = "lantiq,xrx200-mdio";
316 phy0: ethernet-phy@0 {
318 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
320 phy1: ethernet-phy@1 {
322 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
324 phy5: ethernet-phy@5 {
326 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
328 phy11: ethernet-phy@11 {
330 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
332 phy13: ethernet-phy@13 {
334 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";