6 model = "FRITZ3370 - Fritz!Box WLAN 3370";
9 bootargs = "console=ttyLTQ0,115200 ubi.mtd=1,512 root=/dev/mtdblock9";
13 failsafe = &power_red;
14 running = &power_green;
17 internet = &info_green;
23 reg = <0x0 0x8000000>;
29 compatible = "gen_nand", "lantiq,nand-xway";
31 reg = <1 0x0 0x2000000>;
42 reg = <0x400000 0x3000000>;
46 label = "vr9_firmware";
47 reg = <0x3400000 0x400000>;
51 reg = <0x3800000 0x3000000>;
55 reg = <0x6800000 0x200000>;
58 label = "nand-filesystem";
59 reg = <0x6a00000 0x1600000>;
64 gpio: pinmux@E100B10 {
65 pinctrl-names = "default";
66 pinctrl-0 = <&state_default>;
68 state_default: pinmux {
70 lantiq,groups = "spi", "spi_cs4";
71 lantiq,function = "gpio";
74 lantiq,groups = "mdio";
75 lantiq,function = "mdio";
78 lantiq,groups = "nand cle", "nand ale",
79 "nand rd", "nand cs1", "nand rdy";
80 lantiq,function = "ebu";
84 lantiq,pins = "io37", "io44";
86 lantiq,open-drain = <0>;
100 compatible = "lantiq,xrx200-net";
101 reg = < 0xE108000 0x3000 /* switch */
102 0xE10B100 0x70 /* mdio */
103 0xE10B1D8 0x30 /* mii */
104 0xE10B308 0x30 /* pmac */
106 interrupt-parent = <&icu0>;
107 interrupts = <73 72>;
110 compatible = "lantiq,xrx200-pdi";
111 #address-cells = <1>;
114 mac-address = [ 00 11 22 33 44 55 ];
118 compatible = "lantiq,xrx200-pdi-port";
121 phy-handle = <&phy0>;
122 gpios = <&gpio 37 0>;
125 compatible = "lantiq,xrx200-pdi-port";
128 phy-handle = <&phy1>;
129 gpios = <&gpio 44 0>;
132 compatible = "lantiq,xrx200-pdi-port";
135 phy-handle = <&phy11>;
138 compatible = "lantiq,xrx200-pdi-port";
141 phy-handle = <&phy13>;
146 #address-cells = <1>;
148 compatible = "lantiq,xrx200-mdio";
149 phy0: ethernet-phy@0 {
151 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
153 phy1: ethernet-phy@1 {
155 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
157 phy11: ethernet-phy@11 {
159 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
161 phy13: ethernet-phy@13 {
163 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
172 lantiq,portmask = <0x3>;
177 #address-cells = <1>;
180 compatible = "spi-gpio";
182 gpio-miso = <&gpio 16 0>;
183 gpio-mosi = <&gpio 17 0>;
184 gpio-sck = <&gpio 18 0>;
185 num-chipselects = <1>;
186 cs-gpios = <&gpio 10 1>;
189 #address-cells = <1>;
191 compatible = "jedec,spi-nor";
193 spi-max-frequency = <1000000>;
195 ath9k_cal: partition@0 {
202 reg = <0x20000 0x10000>;
208 reg = <0x30000 0x10000>;
216 compatible = "ath9k,eeprom";
217 ath,eep-flash = <&ath9k_cal 0x985>;
223 compatible = "lantiq,phy-xrx200";
224 firmware = "lantiq/vr9_phy11g_a1x.bin";
229 compatible = "gpio-keys-polled";
230 #address-cells = <1>;
232 poll-interval = <100>;
236 linux,code = <0x100>;
240 gpios = <&gpio 29 0>;
241 linux,code = <0x101>;
246 compatible = "gpio-leds";
250 gpios = <&gpio 32 1>;
251 default-state = "keep";
255 gpios = <&gpio 33 1>;
259 gpios = <&gpio 34 1>;
263 gpios = <&gpio 35 1>;
267 gpios = <&gpio 36 1>;
271 gpios = <&gpio 38 1>;
273 info_green: info_green {
274 label = "info_green";
275 gpios = <&gpio 47 1>;