6 model = "FRITZ3370 - Fritz!Box WLAN 3370";
9 bootargs = "console=ttyLTQ0,115200 ubi.mtd=1,512 root=/dev/mtdblock9";
13 failsafe = &power_red;
14 running = &power_green;
17 internet = &info_green;
23 reg = <0x0 0x8000000>;
29 compatible = "gen_nand", "lantiq,nand-xway";
31 reg = <1 0x0 0x2000000>;
42 reg = <0x400000 0x3000000>;
46 label = "vr9_firmware";
47 reg = <0x3400000 0x400000>;
51 reg = <0x3800000 0x3000000>;
55 reg = <0x6800000 0x200000>;
58 label = "nand-filesystem";
59 reg = <0x6a00000 0x1600000>;
64 gpio: pinmux@E100B10 {
65 pinctrl-names = "default";
66 pinctrl-0 = <&state_default>;
68 state_default: pinmux {
70 lantiq,groups = "mdio";
71 lantiq,function = "mdio";
74 lantiq,groups = "nand cle", "nand ale",
75 "nand rd", "nand cs1", "nand rdy";
76 lantiq,function = "ebu";
80 lantiq,pins = "io37", "io44";
82 lantiq,open-drain = <0>;
91 pins_spi_default: pins_spi_default {
93 lantiq,groups = "spi_di";
94 lantiq,function = "spi";
97 lantiq,groups = "spi_do", "spi_clk",
99 lantiq,function = "spi";
109 lantiq,portmask = <0x3>;
114 compatible = "ath9k,eeprom";
115 ath,eep-flash = <&ath9k_cal 0x985>;
121 compatible = "lantiq,phy-xrx200";
122 firmware = "lantiq/vr9_phy11g_a1x.bin";
127 compatible = "gpio-keys-polled";
128 #address-cells = <1>;
130 poll-interval = <100>;
134 linux,code = <0x100>;
138 gpios = <&gpio 29 0>;
139 linux,code = <0x101>;
144 compatible = "gpio-leds";
147 label = "fritz3370:green:power";
148 gpios = <&gpio 32 1>;
149 default-state = "keep";
152 label = "fritz3370:red:power";
153 gpios = <&gpio 33 1>;
156 label = "fritz3370:red:info";
157 gpios = <&gpio 34 1>;
160 label = "fritz3370:green:wlan";
161 gpios = <&gpio 35 1>;
164 label = "fritz3370:green:dsl";
165 gpios = <&gpio 36 1>;
168 label = "fritz3370:green:lan";
169 gpios = <&gpio 38 1>;
171 info_green: info_green {
172 label = "fritz3370:green:info";
173 gpios = <&gpio 47 1>;
179 pinctrl-names = "default";
180 pinctrl-0 = <&pins_spi_default>;
185 #address-cells = <1>;
187 compatible = "jedec,spi-nor";
189 spi-max-frequency = <1000000>;
191 ath9k_cal: partition@0 {
198 reg = <0x20000 0x10000>;
204 reg = <0x30000 0x10000>;
213 compatible = "lantiq,xrx200-pdi";
214 #address-cells = <1>;
217 mac-address = [ 00 11 22 33 44 55 ];
221 compatible = "lantiq,xrx200-pdi-port";
224 phy-handle = <&phy0>;
225 gpios = <&gpio 37 0>;
228 compatible = "lantiq,xrx200-pdi-port";
231 phy-handle = <&phy1>;
232 gpios = <&gpio 44 0>;
235 compatible = "lantiq,xrx200-pdi-port";
238 phy-handle = <&phy11>;
241 compatible = "lantiq,xrx200-pdi-port";
244 phy-handle = <&phy13>;
249 #address-cells = <1>;
251 compatible = "lantiq,xrx200-mdio";
252 phy0: ethernet-phy@0 {
254 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
256 phy1: ethernet-phy@1 {
258 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
260 phy11: ethernet-phy@11 {
262 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
264 phy13: ethernet-phy@13 {
266 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";