6 model = "FRITZ3370 - Fritz!Box WLAN 3370";
9 bootargs = "console=ttyLTQ0,115200 ubi.mtd=1,512 root=/dev/mtdblock9";
13 led-boot = &power_green;
14 led-failsafe = &power_red;
15 led-running = &power_green;
18 led-internet = &info_green;
23 reg = <0x0 0x8000000>;
29 compatible = "gen_nand", "lantiq,nand-xway";
31 reg = <1 0x0 0x2000000>;
36 compatible = "fixed-partitions";
47 reg = <0x400000 0x3000000>;
51 label = "vr9_firmware";
52 reg = <0x3400000 0x400000>;
56 reg = <0x3800000 0x3000000>;
60 reg = <0x6800000 0x200000>;
63 label = "nand-filesystem";
64 reg = <0x6a00000 0x1600000>;
70 gpio: pinmux@E100B10 {
71 pinctrl-names = "default";
72 pinctrl-0 = <&state_default>;
74 state_default: pinmux {
76 lantiq,groups = "mdio";
77 lantiq,function = "mdio";
80 lantiq,groups = "nand cle", "nand ale",
81 "nand rd", "nand cs1", "nand rdy";
82 lantiq,function = "ebu";
86 lantiq,pins = "io37", "io44";
88 lantiq,open-drain = <0>;
97 pins_spi_default: pins_spi_default {
99 lantiq,groups = "spi_di";
100 lantiq,function = "spi";
103 lantiq,groups = "spi_do", "spi_clk",
105 lantiq,function = "spi";
113 gpios = <&gpio 5 GPIO_ACTIVE_HIGH
114 &gpio 14 GPIO_ACTIVE_HIGH>;
115 lantiq,portmask = <0x3>;
120 compatible = "ath9k,eeprom";
121 ath,eep-flash = <&ath9k_cal 0x985>;
127 compatible = "lantiq,phy-xrx200";
128 firmware = "lantiq/vr9_phy11g_a1x.bin";
133 compatible = "gpio-keys-polled";
134 #address-cells = <1>;
136 poll-interval = <100>;
139 gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
140 linux,code = <BTN_0>;
144 gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
145 linux,code = <BTN_1>;
150 compatible = "gpio-leds";
153 label = "fritz3370:green:power";
154 gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
155 default-state = "keep";
158 label = "fritz3370:red:power";
159 gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
162 label = "fritz3370:red:info";
163 gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
166 label = "fritz3370:green:wlan";
167 gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
170 label = "fritz3370:green:dsl";
171 gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
174 label = "fritz3370:green:lan";
175 gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
177 info_green: info_green {
178 label = "fritz3370:green:info";
179 gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
185 pinctrl-names = "default";
186 pinctrl-0 = <&pins_spi_default>;
191 #address-cells = <1>;
193 compatible = "jedec,spi-nor";
195 spi-max-frequency = <1000000>;
197 ath9k_cal: partition@0 {
204 reg = <0x20000 0x10000>;
210 reg = <0x30000 0x10000>;
219 compatible = "lantiq,xrx200-pdi";
220 #address-cells = <1>;
223 mac-address = [ 00 11 22 33 44 55 ];
227 compatible = "lantiq,xrx200-pdi-port";
230 phy-handle = <&phy0>;
231 gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
234 compatible = "lantiq,xrx200-pdi-port";
237 phy-handle = <&phy1>;
238 gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
241 compatible = "lantiq,xrx200-pdi-port";
244 phy-handle = <&phy11>;
247 compatible = "lantiq,xrx200-pdi-port";
250 phy-handle = <&phy13>;
255 #address-cells = <1>;
257 compatible = "lantiq,xrx200-mdio";
258 phy0: ethernet-phy@0 {
260 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
262 phy1: ethernet-phy@1 {
264 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
266 phy11: ethernet-phy@11 {
268 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
270 phy13: ethernet-phy@13 {
272 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";