5 #include <dt-bindings/input/input.h>
8 compatible = "avm,fritz7320", "lantiq,xway", "lantiq,ar9";
9 model = "1&1 HomeServer";
12 bootargs = "console=ttyLTQ0,115200";
17 led-failsafe = &power;
20 led-internet = &info_green;
26 reg = <0x0 0x4000000>;
32 compatible = "lantiq,nor";
34 reg = <0 0x0 0x1000000>;
39 compatible = "fixed-partitions";
43 ath9k_cal: partition@0 {
45 reg = <0x00000 0x20000>;
51 reg = <0x20000 0xf60000>;
56 reg = <0xf80000 0x40000>;
62 reg = <0xfc0000 0x40000>;
69 gpio: pinmux@E100B10 {
70 pinctrl-names = "default";
71 pinctrl-0 = <&state_default>;
73 state_default: pinmux {
75 lantiq,groups = "gnt1", "req1", "req2", "req3", "req4", "gnt2", "gnt3", "gnt4";
76 lantiq,function = "pci";
79 lantiq,groups = "req1", "req2", "req3", "req4";
81 lantiq,open-drain = <1>;
85 lantiq,groups = "gnt1", "gnt2", "gnt3", "gnt4";
94 mtd-mac-address = <&ath9k_cal 0xa91>;
95 mtd-mac-address-increment = <(-2)>;
104 compatible = "gpio-keys-polled";
105 #address-cells = <1>;
107 poll-interval = <100>;
111 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
112 linux,code = <KEY_RFKILL>;
116 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
117 linux,code = <KEY_PHONE>;
122 compatible = "gpio-leds";
124 label = "fritz7320:green:power";
125 gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
126 default-state = "keep";
129 label = "fritz7320:green:fon";
130 gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
133 label = "fritz7320:green:dect";
134 gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
137 label = "fritz7320:green:wlan";
138 gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
140 info_green: info_green {
141 label = "fritz7320:green:info";
142 gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
145 label = "fritz7320:red:info";
146 gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
154 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
157 compatible = "pci0,0";
158 reg = <0x7000 0 0 0 0>;
159 qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */